Xanthan is an important polysaccharide with many beneficial properties. Sulfated xanthan derivatives have anticoagulant and antithrombotic activity. This work proposes a new method for the synthesis of xanthan sulfates using sulfamic acid. Various N-substituted ureas have been investigated as process activators. It was found that urea has the greatest activating ability. BBD of xanthan sulfation process with sulfamic acid in 1,4-dioxane has been carried out. It was shown that the optimal conditions for the sulfation of xanthan (13.1 wt% sulfur content) are: the amount of sulfating complex per 1 g of xanthan is 3.5 mmol, temperature 90 °C, duration 2.3 h. Sulfated xanthan with the maximum sulfur content was analyzed by physicochemical methods. Thus, in the FTIR spectrum of xanthan sulfate, in comparison with the initial xanthanum, absorption bands appear at 1247 cm⁻¹, which corresponds to the vibrations of the sulfate group. It was shown by GPC chromatography that the starting xanthan gum has a bimodal molecular weight distribution of particles, including a high molecular weight fraction with M_w > 1000 kDa and an LMW fraction with M_w < 600 kDa. It was found that the Mw of sulfated xanthan gum has a lower value (~612 kDa) in comparison with the original xanthan gum, and a narrower molecular weight distribution and is characterized by lower PD values. It was shown by thermal analysis that the main decomposition of xanthan sulfate, in contrast to the initial xanthan, occurs in two stages. The DTG curve has two pronounced peaks, with maxima at 226 and 286 °C.

Sulfated polysaccharides have a variety of important biologically active properties, such as anticoagulant, hypolipidemic, antiviral activity, the ability to be a means of targeted drug delivery and to improve the water solubility of certain drugs. Initial and sulfated polysaccharides’ biological activity depends on the method of their preparation, composition and structure. Currently, there is an extensive body of literature data on methods for the sulfation of various natural polysaccharides. However, modern reviews on this topic mainly focus on the biological activity and application of sulfated polymers, rather than on synthesis methods. The latest comprehensive review on methods for the synthesis of sulfated polysaccharides was performed by Caputo in 2019. To further study this area, you need to know the latest trends in this topic. Based on this, we decided to create a new, up-to-date review covering most of the existing methods for the synthesis of sulfated polysaccharides. This work examined methods for the synthesis of biologically active polysaccharide sulfates and their effect on polymer characteristics, as well as the advantages and disadvantages of each method. Traditional methods for sulfating polysaccharides were reviewed such as using a complex of sulfur trioxide with pyridine, and new methods based on the use of toxic free and corrosive free reagents. Some data on the biological activity of the obtained polysaccharides are considered.

Spruce (Piceaabies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.

Betulin is an important triterpenoid substance isolated from birch bark, which, together with its sulfates, exhibits important bioactive properties. We report on a newly developed method of betulin sulfation with sulfamic acid in pyridine in the presence of an Amberlyst^®15 solid acid catalyst. It has been shown that this catalyst remains stable when being repeatedly (up to four cycles) used and ensures obtaining of sulfated betulin with a sulfur content of ~10%. The introduction of the sulfate group into the betulin molecule has been proven by Fourier-transform infrared, ultraviolet-visible, and nuclear magnetic resonance spectroscopy. The Fourier-transform infrared (FTIR) spectra contain absorption bands at 1249 and 835–841 cm⁻¹; in the UV spectra, the peak intensity decreases; and, in the nuclear magnetic resonance (NMR) spectra, of betulin disulfate, carbons С3 and С28 are completely shifted to the weak-field region (to 88.21 and 67.32 ppm, respectively) with respect to betulin. Using the potentiometric titration method, the product of acidity constants K₁ and K₂ of a solution of the betulin disulfate H⁺ form has been found to be 3.86 × 10^–6 ± 0.004. It has been demonstrated by the thermal analysis that betulin and the betulin disulfate sodium salt are stable at temperatures of up to 240 and 220 °C, respectively. The density functional theory method has been used to obtain data on the most stable conformations, molecular electrostatic potential, frontier molecular orbitals, and mulliken atomic charges of betulin and betulin disulfate and to calculate the spectral characteristics of initial and ulfated betulin, which agree well with the experimental data.

Flax shive is the main waste (up to 70 wt %) in the production of flax fiber. It represents the lignified parts of the flax stem mainly in the form of small straws. Complex processing of such wastes is a significant problem due to the heterogeneity of the chemical structure of lignin. This article presents the results of reductive catalytic fractionation (RCF) of flax shive in ethanol and isopropanol at elevated temperatures (225–250 °C) in the presence of a bifunctional catalyst (Ru/C) and molecular hydrogen. This provides solvolytic depolymerization of lignin and hemicelluloses presented in flax shive. Catalytic hydrogenation effectively stabilizes the formed lignin intermediates and prevents repolymerization reactions producing the lignin fraction with a high degree of depolymerization. RCF of flax shive produces solid products with a high cellulose content and liquid products consisting mainly of monophenolic compounds. Furthermore, the effect of different characteristics (the ruthenium content, particle size, and support acidity) of the bifunctional catalysts containing ruthenium nanoparticles supported on mesoporous, graphite-like carbon material Sibunit^®-4 on the yield and composition of the products of hydrogenation of flax shive in sub- and super-critical ethanol has been studied. Bifunctional catalysts Ru/C used in the RCF of flax shive increase its conversion from 44 to 56 wt % and the yield of monophenols from 1.1 to 10.2 wt % (based on the weight of lignin in the sample). Using the best Ru/C catalyst containing 3% of Ru on oxidized at 400 °C carbon support, the high degree of delignification (up to 79.0%), cellulose yield (up to 67.2 wt %), and monophenols yield (up to 9.5 wt %) have been obtained.