The electrolytic production of metallic zinc from processing zinc sulfide concentrates generates a residue containing cadmium, copper, and cobalt that need to be removed from the electrolytic zinc solution because they are harmful to the zinc electro-winning process. This residue is commonly sent to other parties that partly recover the contained elements. These elements can generate revenues if recovered at the zinc plant site. A series of laboratory tests were conducted to evaluate a method to process a zinc plant residue with the objective of recovering cobalt into a salable product. The proposed process comprises washing, selective leaching, purifying and precipitation of cobalt following its oxidation. The process allows the production of a cobalt rich hydroxide precipitate assaying 45 ± 4% Co, 0.8 ± 0.2% Zn, 4.4 ± 0.7% Cu, and 0.120 ± 0.004% Cd at a 61 ± 14% Co recovery. Replicating the whole process with different feed samples allowed the identification of the critical steps in the production of the cobalt product; one of these critical steps being the control of the oxidation conditions for the selective precipitation step.
Implementing mixed metal oxide (MMO) anodes in zinc electrowinning is highly desired due to the considerable reduction in electrical energy consumption. However, the presence of manganese in the electrolyte is a major obstacle for implementing MMO anodes in the zinc cell houses. In this work, we explore the possibility of using plant off-gas, containing SO2, to remove manganese. A SO2/air gas mixture with different SO2 and O2 concentrations was therefore used for the oxidative precipitation of manganese. It was shown that the manganese oxidation reaction is highly pH-dependent. Calcium hydroxide was used to control the pH during the process. Different operating parameters, i.e., pH, SO2/air ratio, reaction time, and effect of cobalt as a reaction catalyst, were investigated. Optimal conditions for manganese removal were reported. Under the optimal conditions, the manganese concentration decreased from 1 g L−1 to less than 1 mg L−1 within 30 min. Precipitates were characterized using EDS, XRF, and XPS techniques and showed coprecipitation of manganese, zinc, gypsum, and cobalt.
Removing manganese from zinc electrolytes is necessary to pave the way for replacing lead-based anodes with mixed metal oxide (MMO) anodes. MMO anodes offer significantly lower overpotential towards oxygen evolution reactions, thus are attractive from an energy consumption viewpoint. Previous studies had shown that, thanks to the catalytic effect of cobalt, manganese can be removed successfully from the zinc purification solution through the oxidative precipitation method using a simulated roasting off-gas plant. This study focuses on understanding the primary mechanism behind manganese oxidation precipitation and investigating the influence of various operating parameters such as temperature, dissolved oxygen (DO), and solution potential on the reaction kinetics. The results revealed that the kinetics of the reaction was highly dependent on the temperature and catalyst activity rather than on the reactant concentration. Additives, with radical scavenging effects, were added to identify the radicals responsible for the oxidation of Mn. The manganese oxidation reaction was dramatically suppressed when methanol was added. However, in the presence of tert-butyl alcohol (TBA), a sensible reduction in manganese removal was not observed, suggesting sulfate radical as the predominant species for oxidizing manganese. The physical and chemical characteristics of the sediments were also presented.