We report on the fabrication and characterization of a highly sensitive temperature sensor by selectively filling the nematic liquid crystal (NLC) 6CHBT into a single void within the photonic crystal fiber (PCF) structure. The temperature response of the device is experimentally characterized, showing good linearity, repeatability, and sensitivity at around -3.90 nm/°C within the temperature range from 44°C to 53°C. The mode properties of the device are theoretically investigated, confirming the mode coupling principle and the temperature sensitivity of the device.
7 May 2008 in IEEE Transactions on Instrumentation and Measurement
The paper presents our latest experimental results on the influence of temperature, an external electric field, and hydrostatic pressure on propagation properties of the photonic crystal fibers infiltrated with liquid crystals of low and medium material anisotropies. Measurand-induced shifts of the photonic bandgap wavelengths give information about the value of temperature, voltage, and pressure. Moreover, temperature-dependent positions of the photonic bandgap wavelengths in the transmission spectrum can serve to determine the thermal characteristics of the liquid crystal ordinary refractive index.
In this paper we present an interferometer based on photonic crystal fiber (PCF) tip ended with a solid silica-sphere for refractive index sensing. The sensor is fabricated by splicing one end of the holey PCF to a single mode fiber (SMF) and applying arc at the other end to form a solid sphere. The sensor has been experimentally tested for refractive index and temperature sensing by monitoring its wavelength shift. Measurement results show that the sensor has the resolution of the order of over the refractive index range of 1.33–1.40, and temperature sensitivity of the order of in the range of 20–100 °C.
1 October 1998 in Molecular Crystals and Liquid Crystals
Nonlinear self-focusing of the laser beam in waveguide with nematic homeotropically aligned liquid crystalline layer is analysed theoretically and observed experimentally. The nonlinearity is caused by the reorientational effect and the stable self-trapped beams are created by the spatially periodic reorientation in the liquid crystalline layer.
In this paper, we report and demonstrate a novel miniaturized intrinsic Fabry-Perot interferometer (IFPI) based on a simplified hollow core fiber ended with a hollow silica sphere tip. The hollow core fiber is spliced to single mode fiber and subsequently applied with fusion arc at the end, forming a hollow sphere with a thin silica wall. The reflection spectrum is modulated by the environment of the sensor head such as refractive index and temperature. By monitoring and measuring the fringe visibility, the measurement of refractive index of the calibrated solution is carried out experimentally. The achievable refractive index (RI) resolution is about 6.2 × 10-5 by measuring the fringe visibility. This sensor offers key features and advantages of IFPI including easy fabrication, low loss, low cost, and good fringe visibility. Furthermore, the sensor head is made of single material and therefore has the potential for measurements in harsh environments. Measurements at high temperatures up to ~ 1000°C are carried out. Results reveal that the sensor has low temperature.