The rapid growth of Western Australia’s population and economy will affect the sustainability of its building sector. The energy consumption of all processes during mining to material production, transportation, construction plant and tools, and operation (heating, cooling, lighting, hot water and home appliances) stages causes high greenhouse gas (GHG) emissions and embodied energy (EE) consumption. The literature review to date have confirmed that the building envelope consisting of exterior walls, windows, external doors, roof, and floor could significantly affect the energy consumption during operation stage. Australian construction industry could thus enhance the energy efficiency of the building envelope in order to achieve its GHG emissions reduction targets. This paper has assessed the GHG emissions and EE consumption associated with the construction and use of a typical house in Perth for sixty building envelope options using a life cycle assessment (LCA) approach. The results show that the building envelope consisting of cast in situ sandwich wall with polyethylene terephthalate (PET) foam core, double glazed windows, and concrete roof tiles has the lowest life cycle GHG emissions and embodied energy consumption
Western Australia’s housing sector is growing rapidly and around half a million houses are expected to be built by 2030, which not only will result in increased energy and resources demand but will have socio-economic impacts. Majority of Western Australians live in detached houses made of energy intensive clay bricks, which have a high potential to generate construction and demolition (C&D) waste. Therefore, there is a need to look into the use of alternative materials and construction methods. Due to Western Australia’s temperate climate, concrete could not only offer a comfortable living space but an operational energy saving also can be achieved. This paper has assessed the global warming implications of cast in-situ concrete sandwich wall system as an alternative to clay brick walls (CBW) with partial replacement of cement in concrete with by-products such as fly ash (FA) and ground granulated blast furnace slag (GGBFS), natural aggregate (NA) with recycled crushed aggregate (RCA), natural sand (NS) with manufactured sand (MS) and, polyethylene terephthalate (PET) foam core as a replacement to polystyrene core for construction of a typical 4 × 2 × 2 detached house in Perth. Life cycle management (LCM) approach has been used to determine global warming reduction benefits due to the use of available by-products and recycled materials in Western Australian houses.
28 April 2017 in The International Journal of Life Cycle Assessment
Laboratory compressive tests and acoustic emission analysis have been used to investigate the failure of pultruded fibre reinforced polymer materials after they have been subjected to temperature stress and compressive loading. The acoustic emission approach is then compared with the experimental values of energy released by each sample through the corresponded load-displacement curve. Samples subjected to severe thermal conditions showed more evidence of brittle failure mechanism. This analysis has been conducted in order to confirm the potential capacity of fibre reinforced polymer materials, known currently for their strength and lightweight but often ‘brittle’ physical characteristics, to perform under exaggerated conditions of temperature and compressive stress.