In recent years, the synthesis of ammonia (NH₃) has been developed by electrocatalytic technology that is a potential way to effectively replace the Haber–Bosch process, which is an industrial synthesis of NH₃. Industrial ammonia has caused a series of problems for the population and environment. In the face of sustainable green synthesis methods, the advantages of electrocatalytic nitrogen reduction for synthesis of NH₃ in aqueous media have attracted a great amount of attention from researchers. This review summarizes the recent progress on the highly efficient electrocatalysts based on 2D non-metallic nanomaterial and provides a brief overview of the synthesis principle of electrocatalysis and the performance measurement indicators of electrocatalysts. Moreover, the current development of N₂ reduction reaction (NRR) electrocatalyst is discussed and prospected.

This review comprehensively covers the research accomplished in the field of laser welding of biomedical devices and implant materials. Laser welding technology in the recent past has been envisaged for numerous biomedical applications encompassing the reconstruction, fabrication, joining and sealing of the implanted biomaterials. It is the most studied and an increasingly applied manufacturing technology that garners the distinct advantages of smaller beam diameters leading to minimal thermal cycles that reduce the size of heat affected zone and instigate microstructural refinement. This paper presents a detailed critical review of similar and dissimilar welding of titanium alloys, cobalt-chromium alloys, steel, bulk metallic glasses and polymer-based biomaterials. Mechanical properties of the welded joints such as fatigue load, tensile and flexural strength, elongation, hardness and modulus of elasticity are discussed. The effect of laser processing parameters on microstructural features and the corresponding metallurgical defects encountered such as cracks, porosities, voids or the loss of alloying elements are reviewed. Furthermore, the corrosion behavior, cytotoxicity and biocompatibility of the welded implants in the simulated mediums are discussed. Furthermore, this article also summarizes the present-day applications associated with implant materials and is aimed at the further involvement of the laser precision technology in producing materials and joints with desired biomechanical characteristics. Lastly, the current research gaps on the role of laser welding of implants and the anticipated emerging fronts are summarized.

In industrial processes, the microtechnology concept refers to the operation of small devices that integrate the elements of operational and reaction units to save energy and space. The advancement of knowledge in the field of microfluidics has resulted in fabricating devices with different applications in micro and nanoscales. Micro- and nano-devices can provide energy-efficient systems due to their high thermal performance. Fluid flow in microchannels and microstructures has been widely considered by researchers in the last two decades. In this paper, a review study on fluid flow within microstructures is performed. The present study aims to present the results obtained in previous studies on this type of system. First, different types of flows in microchannels are examined. The present article will then review previous articles and present a general summary in each section. Then, the multi-phase flows inside the microchannels are discussed, and the flows inside the micropumps, microturbines, and micromixers are evaluated. According to the literature review, it is found that the use of microstructures enhances energy efficiency. The results of previous investigations revealed that the use of nanofluids as a working fluid in microstructures improves energy efficiency. Previous studies have demonstrated special attention to the design aspects of microchannels and micro-devices compared to other design strategies to improve their performance. Finally, general concluding remarks are presented, and the existing challenges in the use of these devices and suggestions for future investigations are presented.

The use of cutting fluids has played a vital role in machining operations in lubrication and cooling. Most cutting fluids are mineral oil-based products that are hazardous to the environment and the worker, cause severe diseases and pollute the environment. In addition, petroleum resources are becoming increasingly unsustainable. Due to environmental and health issues, legislations have been established to ensure that the consumption of mineral oil is reduced. Consequently, researchers are making efforts to replace these mineral oil-based products. Vegetable oils are grasping attention due to their better lubricating properties, ease of availability, biodegradability, low prices, and non-toxicity. In this study, a detailed review and critical analysis are conducted of the research works involving vegetable oils as cutting fluids keeping in view the shortcomings and possible solutions to overcome these drawbacks. The purpose of the review is to emphasise the benefits of vegetable oil-based cutting fluids exhibiting comparable performance to that of mineral oil-based products. In addition, an appropriate selection of non-edible vegetable oil-based cutting fluids along with optimum cutting parameters to avoid a scanty supply of edible oils is also discussed. According to this research, vegetable oils are capable of substituting synthetic cutting fluids, and this option might aid in the successful and cost-efficient implementation of green machining.