José Teixeira Gonçalves

Prof. Dr. José Teixeira Gonçalves

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2021 in Electronics
Verified
Journal Article
Open access
PDF file
JGJosé Teixeira Gonçalves
José Teixeira Gonçalves
Stanimir ValtchevStanimir Valtchev
Stanimir Valtchev
Rui MelicioRui Melicio
Rui Melicio
AGAlcides Gonçalves
Alcides Gonçalves
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
The hybrid three-phase rectifiers (HTR) consist of parallel associations of two rectifiers (rectifier 1 and rectifier 2), each one of them with a distinct operation, while the sum of their input currents forms a sinusoidal or multilevel waveform. In general, rectifier 1 is a GRAETZ (full bridge) (can be combined with a BOOST converter) and rectifier 2 is combined with a DC-DC converter. In this HTR contest, this paper is intended to answer some important questions about those hybrid rectifiers. To obtain the correct answers, the study is conducted as an analysis of a systematic literature review. Thus, a search was carried out in the databases, mostly IEEE and IET, and 34 papers were selected as the best corresponding to the HTR theme. It is observed that the preferred form of power distribution in unidirectional hybrid three-phase rectifiers (UHTR) is 55%Po (rectifier 1) and 45%Po (rectifier 2). For the bidirectional hybrid three-phase rectifiers (BHTR), rectifier 1 preferably takes 90% of Po and 10% of Po is processed by rectifier 2. It is also observed that the UHTR that employ the single-ended primary-inductor converter (SEPIC) or VIENNA converter topologies in rectifier 2 can present sinusoidal input currents with low total harmonic distortion (THD) and high Power Factor (PF), even successfully complying with the international standards. The same can be said about the rectifier that employs a pulse-width (PWM) converter of BOOST topology in rectifier 2. In short, the HTR are interesting because they allow using the GRAETZ full bridge topology in rectifier 1, thus taking advantage of its characteristics, being simple, robust, and reliable. At the same time, the advantages of rectifier 2, i.e., high PF and low THD, are well used. In addition, this article also points out the future direction of research that is still unexplored in the literature, thus giving opportunities for future innovation.

1 June 2019
Verified
Conference Paper
Closed access
JGJosé Teixeira Gonçalves
José Teixeira Gonçalves
Stanimir ValtchevStanimir Valtchev
Stanimir Valtchev
Rui MelicioRui Melicio
Rui Melicio
Mohammed AL-SAADIMohammed AL-SAADI
Mohammed AL-SAADI
In this paper, a three-phase hybrid rectifier is proposed, employing a boost converter without the addition of isolation transformer and output voltage control. This topology is usually considered to be not viable due to the current interactions. In order to mitigate those interactions, the boost inductor is replaced by a magnetically coupled inductor. The coupled inductor forces the balance between the two interconnected windings, placed at the positive and negative poles, and thus eliminating the current interactions. The results show that the proposed three-phase rectifier does not undergo a current interaction and functions as a hybrid rectifier. Furthermore, it was noted that the proposed rectifier at 20 kW presents an elevated power factor and a low total harmonic distortion.

13 February 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JGJosé Teixeira Gonçalves
José Teixeira Gonçalves
Stanimir ValtchevStanimir Valtchev
Stanimir Valtchev
Rui MelicioRui Melicio
Rui Melicio
In this paper, a new way to mitigate the current interactions is proposed. The problem of current interactions arises when a modular three-phase (3-phase) rectifier (three single-phase modules) with boost converter for power factor correction (PFC) is used. A new differential-mode choke filter is implemented in the developed boost converter. The choke here is a specially made differential inductor in the input of the boost converter that eliminates the known current interactions. To prove the new concept, a study of the level of mitigation of the current interactions is presented. The control is operated in continuous driving mode (CCM), and the popular UC3854B circuit was used for this. The rectifier proposal is validated through a set of simulations performed on the PSIM 12.0 platform, as well as the construction of a prototype. With the results obtained, it is confirmed that the differential-mode choke filter eliminates the current interactions. It is observed that at the input of the rectifier, a sinusoidal alternating current with a low level of harmonic distortion is consumed from the grid. The sinusoidal shape of the phase current proves that a better power factor capable of meeting the international standards is obtained, and that the circuit in its initial version is operational. This proven result promises a good PFC operation, to guarantee the better quality of the electrical energy, being able to be applied in systems that require a high PFC, e.g., in battery charging, wind systems, or in aeronautics and spacecrafts.

10 May 2024 in Electronics
Verified
Journal Article
Open access
PDF file
JGJosé Teixeira Gonçalves
José Teixeira Gonçalves
Stanimir ValtchevStanimir Valtchev
Stanimir Valtchev
ELEuclides Augusto Luis
Euclides Augusto Luis
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
The unidirectional hybrid three-phase rectifier (UHTR) with Boost converter consists of two different rectifiers (Rectifier 1 and 2), where Rectifier 2 consists of modules corresponding to the phases. Each rectifier processes different part of the current waveform at the input, so that the sum of the current waveform parts is sinusoidal, or multilevel. Analyzing existing literature, the UHTR with Boost converter and isolation transformer, is proven as a classic solution with high weight, volume and cost. Therefore, in 2019 the UHTR with Boost converter was proposed, without any isolation transformer. To do this, it was necessary to replace the Boost inductor of each Rectifier 2 module with a coupled inductor. However, the proposed UHTR has not described the coupled inductor in details, neither the control circuit and the decoupling of the power circuit with the control circuit were described. Therefore, this main objective this paper is to provide answers to those aspects, and consequently present the UHTR proposal in a more realistic and practical application way, thus favoring the implementation of the prototype. A simulation of the proposed UHTR with coupled inductor was performed in the PSIM version 12.0 software with a power of 20 kW. The results of the proposed UHTR show that there is no current interaction and it works correctly, having a high PF of 99.92% and low total harmonic distortion of 3.96% at full load. In this way, it is proven that it is possible to implement an UHTR with a Boost converter and using coupled inductor.

31 March 2017
Verified
Book Chapter
Open access
PDF file
JGJosé Teixeira Gonçalves
José Teixeira Gonçalves
CCCristina Inês Camus
Cristina Inês Camus
Stanimir ValtchevStanimir Valtchev
Stanimir Valtchev
With the objective of having a solar thermoelectric system, running for 24 h a day along the different seasons of the year it is necessary to dimension the adequate storage and back-up systems. The choice of the back-up source of energy depends on how sustainable the power plant should be. In this study, the choice was the use of biomass in order to have a 100% renewable power plant. The selected site was the Alentejo region (Portugal). The local Direct Normal Irradiation (DNI) data was used to simulate with the System Advisor Model program (SAM) considering a solar system with north field and molten salt storage. The system needs no back-up during three months in a year. The use of biomass pellets is a viable alternative because it makes the power plant 100% renewable and dispatchable without loss of energy due to over-dimension of the expensive solar field and molten storage system.