The last decade has shown an increasing interest on advanced driver assistance systems (ADAS) based on shared control, where automation is continuously supporting the driver at the control level with an adaptive authority. A first look at the literature offers two main research directions: 1) an ongoing effort to advance the theoretical comprehension of shared control, and 2) a diversity of automotive system applications with an increasing number of works in recent years. Yet, a global synthesis on these efforts is not available. To this end, this article covers the complete field of shared control in automated vehicles with an emphasis on these aspects: 1) concept, 2) categories, 3) algorithms, and 4) status of technology. Articles from the literature are classified in theory- and application-oriented contributions. From these, a clear distinction is found between coupled and uncoupled shared control. Also, model-based and model-free algorithms from these two categories are evaluated separately with a focus on systems using the steering wheel as the control interface. Model-based controllers tested by at least one real driver are tabulated to evaluate the performance of such systems. Results show that the inclusion of a driver model helps to reduce the conflicts at the steering. Also, variables such as driver state, driver effort, and safety indicators have a high impact on the calculation of the authority. Concerning the evaluation, driver-in-the-loop simulators are the most common platforms, with few works performed in real vehicles. Implementation in experimental vehicles is expected in the upcoming years.

A recently growing literature discusses the topics of direct yaw moment control based on model predictive control (MPC), and energy-efficient torque-vectoring (TV) for electric vehicles with multiple powertrains. To reduce energy consumption, the available TV studies focus on the control allocation layer, which calculates the individual wheel torque levels to generate the total reference longitudinal force and direct yaw moment, specified by higher level algorithms to provide the desired longitudinal and lateral vehicle dynamics. In fact, with a system of redundant actuators, the vehicle-level objectives can be achieved by distributing the individual control actions to minimize an optimality criterion, e.g., based on the reduction of different power loss contributions. However, preliminary simulation and experimental studies - not using MPC - show that further important energy savings are possible through the appropriate design of the reference yaw rate. This paper presents a nonlinear model predictive control (NMPC) implementation for energy-efficient TV, which is based on the concurrent optimization of the reference yaw rate and wheel torque allocation. The NMPC cost function weights are varied through a fuzzy logic algorithm to adaptively prioritize vehicle dynamics or energy efficiency, depending on the driving conditions. The results show that the adaptive NMPC configuration allows stable cornering performance with lower energy consumption than a benchmarking fuzzy logic TV controller using an energy-efficient control allocation layer.

Automated Driving Systems (ADS) have received a considerable amount of attention in the last few decades, as part of the Intelligent Transportation Systems (ITS) field. However, this technology still lacks total automation capacities while keeping driving comfort and safety under risky scenarios, for example, overtaking, obstacle avoidance, or lane changing. Consequently, this work presents a novel method to resolve the obstacle avoidance and overtaking problems named Hybrid Planning. This solution combines the passenger’s comfort associated with the smoothness of Bézier curves and the reliable capacities of Model Predictive Control (MPC) to react against unexpected conditions, such as obstacles on the lane, overtaking and lane-change based maneuvers. A decoupled linear-model was used for the MPC formulation to ensure short computation times. The obstacles and other vehicles’ information are obtained via V2X (vehicle communications). The tests were performed in an automated Renault Twizy vehicle and they have shown good performance under complex scenarios involving static and moving obstacles at a maximum speed of 60 kph.

Currently, the increase of transport demands along with the limited capacity of the road network have increased traffic congestion in urban and highway scenarios. Technologies such as Cooperative Adaptive Cruise Control (CACC) emerge as efficient solutions. However, a higher level of cooperation among multiple vehicle platoons is needed to improve, effectively, the traffic flow. In this paper, a global solution to merge two platoons is presented. This approach combines: (i) a longitudinal controller based on a feed-back/feed-forward architecture focusing on providing CACC capacities and (ii) hybrid trajectory planning to merge platooning on straight paths. Experiments were performed using Tecnalia’s previous basis. These are the AUDRIC modular architecture for automated driving and the highly reliable simulation environment DYNACAR. A simulation test case was conducted using five vehicles, two of them executing the merging and three opening the gap to the upcoming vehicles. The results showed the good performance of both domains, longitudinal and lateral, merging multiple vehicles while ensuring safety and comfort and without propagating speed changes.

Future vehicle localisation technologies enable major enhancements of vehicle dynamics control. This study proposes a novel vehicle stability control paradigm, based on pre-emptive control that considers the curvature profile of the expected path ahead in the computation of the reference direct yaw moment and braking control action. The additional information allows pre-emptive trail braking control, which slows down the vehicle if the predicted speed profile based on the current torque demand is deemed incompatible with the reference trajectory ahead. Nonlinear model predictive control is used to implement the approach, in which also the steering angle and reference yaw rate provided to the internal model are varied along the prediction horizon, to account for the expected vehicle path. Two pre-emptive stability control configurations with different levels of complexity are proposed and compared with the passive vehicle, and two state-of-the-art nonlinear model predictive stability controllers, one with and one without non-pre-emptive trail braking control. The performance is assessed along obstacle avoidance tests, simulated with a high-fidelity model of an electric vehicle with in-wheel motors. Results show that the pre-emptive controllers achieve higher maximum entry speeds – up to ∼34% and ∼60% in high and low tyre-road friction conditions – than the formulations without preview.

The growing functionalities implemented on vehicles have increased the importance of simulation in the design process. This complexity is mainly driven by the introduction of electrified powertrains, Advanced Driver Assistance Systems (ADAS) and Automated Driving Systems (ADS). Additionally, the automotive industry must reduce development times and cost, while keeping flexible development capabilities and fulfilling demanding regulation standards for safety-critical systems. Existing testing frameworks based on simulation implement typically analytical models to ensure real-time performance, and provide limited flexibility to perform Hardware in the Loop (HiL) setup based tests. In this work a vehicle modelling approach which guarantees high accuracy and real-time capabilities is proposed. Moreover, the proposed approach is validated firstly with real vehicle data, demonstrating that it can fairly reproduce the behaviour of the vehicle tested; and secondly, in a HiL setup to demonstrate the real-time execution capabilities of the approach.