A recently growing literature discusses the topics of direct yaw moment control based on model predictive control (MPC), and energy-efficient torque-vectoring (TV) for electric vehicles with multiple powertrains. To reduce energy consumption, the available TV studies focus on the control allocation layer, which calculates the individual wheel torque levels to generate the total reference longitudinal force and direct yaw moment, specified by higher level algorithms to provide the desired longitudinal and lateral vehicle dynamics. In fact, with a system of redundant actuators, the vehicle-level objectives can be achieved by distributing the individual control actions to minimize an optimality criterion, e.g., based on the reduction of different power loss contributions. However, preliminary simulation and experimental studies - not using MPC - show that further important energy savings are possible through the appropriate design of the reference yaw rate. This paper presents a nonlinear model predictive control (NMPC) implementation for energy-efficient TV, which is based on the concurrent optimization of the reference yaw rate and wheel torque allocation. The NMPC cost function weights are varied through a fuzzy logic algorithm to adaptively prioritize vehicle dynamics or energy efficiency, depending on the driving conditions. The results show that the adaptive NMPC configuration allows stable cornering performance with lower energy consumption than a benchmarking fuzzy logic TV controller using an energy-efficient control allocation layer.

Transport electrification is currently a priority for authorities, manufacturers, and research centers around the world. The development of electric vehicles and the improvement of their functionalities are key elements in this strategy. As a result, there is a need for further research in emission reduction, efficiency improvement, or dynamic handling approaches. In order to achieve these objectives, the development of suitable Advanced Driver‐Assistance Systems (ADAS) is required. Although traditional control techniques have been widely used for ADAS implementation, the complexity of electric multimotor powertrains makes intelligent control approaches appropriate for these cases. In this work, a novel intelligent Torque Vectoring (TV) system, composed of a neuro‐fuzzy vertical tire forces estimator and a fuzzy yaw moment controller, is proposed, which allows enhancing the dynamic behaviour of electric multimotor vehicles. The proposed approach is compared with traditional strategies using the high fidelity vehicle dynamics simulator Dynacar. Results show that the proposed intelligent Torque Vectoring system is able to increase the efficiency of the vehicle by 10%, thanks to the optimal torque distribution and the use of a neuro‐fuzzy vertical tire forces estimator which provides 3 times more accurate estimations than analytical approaches.

Future vehicle localisation technologies enable major enhancements of vehicle dynamics control. This study proposes a novel vehicle stability control paradigm, based on pre-emptive control that considers the curvature profile of the expected path ahead in the computation of the reference direct yaw moment and braking control action. The additional information allows pre-emptive trail braking control, which slows down the vehicle if the predicted speed profile based on the current torque demand is deemed incompatible with the reference trajectory ahead. Nonlinear model predictive control is used to implement the approach, in which also the steering angle and reference yaw rate provided to the internal model are varied along the prediction horizon, to account for the expected vehicle path. Two pre-emptive stability control configurations with different levels of complexity are proposed and compared with the passive vehicle, and two state-of-the-art nonlinear model predictive stability controllers, one with and one without non-pre-emptive trail braking control. The performance is assessed along obstacle avoidance tests, simulated with a high-fidelity model of an electric vehicle with in-wheel motors. Results show that the pre-emptive controllers achieve higher maximum entry speeds – up to ∼34% and ∼60% in high and low tyre-road friction conditions – than the formulations without preview.

The growing functionalities implemented on vehicles have increased the importance of simulation in the design process. This complexity is mainly driven by the introduction of electrified powertrains, Advanced Driver Assistance Systems (ADAS) and Automated Driving Systems (ADS). Additionally, the automotive industry must reduce development times and cost, while keeping flexible development capabilities and fulfilling demanding regulation standards for safety-critical systems. Existing testing frameworks based on simulation implement typically analytical models to ensure real-time performance, and provide limited flexibility to perform Hardware in the Loop (HiL) setup based tests. In this work a vehicle modelling approach which guarantees high accuracy and real-time capabilities is proposed. Moreover, the proposed approach is validated firstly with real vehicle data, demonstrating that it can fairly reproduce the behaviour of the vehicle tested; and secondly, in a HiL setup to demonstrate the real-time execution capabilities of the approach.

Nowadays, the growing functionalities implemented on vehicles make the simulation phase much more important in the design process. For that purpose, a representative model is required, as it allows to reproduce the exact behaviour of the vehicle, and reduce not only the time required for its setup and testing, but also the cost related to these. Due to this, the development of accurate vehicle models has become one of the main areas of interest for the automotive industry. In this work a 16 DOF (degree of freedom) full vehicle model is presented. This model is based on multibody formulation combined with an appropriate solver for real-time execution. In order to validate this model, data from a real test vehicle has been used, comparing the real dynamic response of the vehicle to the one provided by the developed dynamic model. Results show that the presented approach represents effectively the behaviour of a real vehicle, both in longitudinal and lateral terms.