Amir Taheri

Dr. Amir Taheri

Consultant and independent researcher
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2012
Verified
Conference Paper
Closed access
PDF file
ATAmir Taheri
Amir Taheri
OTOle Torsaeter
Ole Torsaeter
DWDag Wessel-Berg
Dag Wessel-Berg
MSMansour Soroush
Mansour Soroush
CO2 sequestration in deep formations is being actively considered for the reduction of greenhouse gas emissions. Saline aquifers are considered as one of the most favorable options for this purpose. It has been observed that dissolution of CO2 into brine causes increased density of the mixture. If the corresponding Rayleigh number of the porous medium is high enough to initiate convection flows, density-driven-convection happens and the rate of dissolution increases. Early time dissolution of CO2 in brine is mainly dominated by molecular diffusion while it will be accelerated by density-driven-convection. More contribution of dissolution mechanism for trapping of CO2 decreases the risk of leakage. Density-driven-convection mechanism was investigated in a Hele-Shaw cell with colored-brine and fresh-water instead of CO2-diffusive layer and brine. A convective instability is created by colored-brine diffusing onto the surface of a fresh-water layer. For this configuration, density-driven-convection flow enhances the mass transfer rate of high density fluid into the low density one. The analysis is also done numerically with Eclipse reservoir simulation software. With this analysis, the effects of density-driven-convection on accelerating the rate of dissolution are investigated. Although the horizontal wavelength of the initial instability is small, an increase in the horizontal wavelength of the convective flow with time and depth is observed as the resulting two-dimensional convection develops. Effects of density of fluids and also dip of the systems on convection flows are studied here. Also the changes in geometry of the convection streams with depth and time are investigated. The results have important implications in dissolution trapping of CO2 in brine aquifers.

7 February 2012
Verified
Conference Paper
Closed access
PDF file
ATAmir Taheri
Amir Taheri
DWDag Wessel-Berg
Dag Wessel-Berg
Ole TorsaeterOle Torsaeter
Ole Torsaeter
MSMansour Soroush
Mansour Soroush
Storage of CO2 into geological formations is a reasonable technical choice for decreasing carbon dioxide emissions to the atmosphere. The dissolution of supercritical CO2 in formation water is one of the main long term trapping mechanisms for CO2 storage into saline aquifers. Convective mixing is predicted to occur, which accelerates the dissolution of carbon dioxide in the saline formation water. This unusual phenomenon arises from the increase in the density of brine when saturated with carbon dioxide. Several factors influence the performance and long-term fate of CO2 injection into deep saline formations. The efficiency of mixing in density-driven natural convection is largely governed by aquifer permeability which is heterogeneous in practice. For deep injection of CO2 in deep saline formations, the movement of both free gas and dissolved CO2 are sensitive to variations in permeability. In this paper, the effects of anisotropy and different kinds of heterogeneity like horizontal and vertical layers and also existence of barriers between layers on the CO2 dissolution in a saturated porous media with brine are investigated using simulation methods. Also the performance of naturally fractured systems and the effective dissolution mechanisms in CO2 storage in such these systems are investigated. Following to simulation results it can be said that the permeability of the system and the permeability anisotropy ratio should be considered as the most important parameters in convective mixing process. In the barrier systems, the geometry of the barriers has a large effect on the density-driven natural convection while in layers systems, the vertical and horizontal location of the layers and also the degree of heterogeneity can be so important. In the case of natural fractured systems and based on the simulation studies on a single block fractured model, it can be said that density-driven natural convection is an effective dissolution mechanism in naturally fractured aquifers. 1. Introduction: Disposal of CO2 in geologic formations represents one of the most promising solutions for the purpose of reducing greenhouse gas emissions. The geological formations such as coal beds, depleted oil and gas reservoirs and deep saline aquifers are widely available with large capacity. In particular, the saline aquifers have an estimated capacity of 320 to 10,000 GT (1 GT = 109 Tonne) of CO2 worldwide and they can be considered as one of the major types of geological formations for CO2 storage (Bachu, 2002).

25 February 2021 in Advances in Chemical Research
Verified
Journal Article
Open access
PDF file
ATAmir Taheri
Amir Taheri
Ole TorsaeterOle Torsaeter
Ole Torsaeter
ELErik Lindeberg
Erik Lindeberg
NHNanji J. Hadia
Nanji J. Hadia
DWDag Wessel-Berg
Dag Wessel-Berg
Convective mixing of free-phase CO2 and brine in saline aquifers is an established technique to accelerate the CO2 dissolution process. Correct estimation of the convection onset time and rate of CO2 dissolution into brine are two crucial parameters regarding safety issues, as the timescale for dissolution corresponds to the same time over which the free-phase CO2 has a chance to leak out from the storage site. In real practice, underground formations are heterogeneous with a layered structure, but the convective mixing in heterogeneous porous media has received less attention than the homogeneous one. This study aims to develop a basic understanding of the role of layered permeability media (layered structure with variation in permeability vertically) on the behavior of convective mixing via well-controlled laboratory experiments. The effects of layering and layer properties on the rate of dissolution of CO2 in water and geometries of the formed convection fingers are studied using a precise experimental set-up with layered-permeability Hele-Shaw cell geometry. Qualitative (snapshots of convection fingers) and quantitative data (amount of the dissolved CO2 into water) are collected simultaneously for a better understanding of the process. The behavior of convection fingers (after the onset of convection) and the effects of model properties on this mixing process are also discussed.

24 December 2020 in Energies
Verified
Journal Article
Open access
PDF file
ATAmir Taheri
Amir Taheri
JYJan David Ytrehus
Jan David Ytrehus
BLBjørnar Lund
Bjørnar Lund
MTMalin Torsæter
Malin Torsæter
We present our new designed concentric Hele-Shaw cell geometry with dynamic similarity to a real field wellbore annulus during primary cementing, and then, the results of displacement flow of Newtonian and yield-stress non-Newtonian fluids in it are described. The displacement stability and efficiency, the effect of back, front, and side boundaries on displacement, bypassing pockets of displaced yield-stress fluid in displacing fluid, and the behavior of pressure gradients in the cell are investigated. Applications of intermediate buoyant particles with different sizes and densities intermediate between those of successively pumped fluids for tracking the interface between the two displaced and displacing fluids are examined. The main idea is to upgrade this concentric Hele-Shaw cell geometry later to an eccentric one and check the possibility of tracking the interface between successive fluids pumped in the cell. Successful results help us track the interface between drilling fluid and spacer/cement during primary cementing in wells penetrating a CO2 storage reservoir and decreasing the risk of CO2 leakage from them.

4 June 2012
Verified
Conference Paper
Closed access
PDF file
MSMansour Soroush
Mansour Soroush
DWDag Wessel-Berg
Dag Wessel-Berg
Ole TorsaeterOle Torsaeter
Ole Torsaeter
ATAmir Taheri
Amir Taheri
JKJon Kleppe
Jon Kleppe
After injecting CO2 into subsurface brine for storage, it will be trapped in the reservoir through various mechanisms. In the beginning, the geological trapping mechanism dominates and the CO2 plume is moving upward below a cap rock. Then brine will imbibe the formation and some parts of the CO2 will be trapped in the pore paces. Later on injected CO2 will dissolve in the brine and increases its density. As a result, the heavier brine will move into deeper parts of the reservoir and density driven convection mixing will occur. This is known as the solubility trapping mechanism. Here in this study, density driven phenomena in CO2 storage in brine and the influencing parameters are the prime targets. We find particularly interesting results for this through Hele-Shaw cell experiments and numerical simulations. Hele-Shaw flow is defined to occur between two parallel flat plates separated by a small gap. In each experiment the cell is filled with fresh water and a shim prevents it to leak. Then liquid with higher density is placed on top. Several tests including water of varying salinity at the top of the cell have been conducted, and the results are interpreted separately and compared with the base experiment. More extensive studies and sensitivity analysis is done based on a simulation model constructed on the reservoir properties of a brine formation, with wide range of affecting parameters, including density differences, permeability variations and the effect of diffusion coefficients. It has been also attempted to investigate the effect of anisotropy and heterogeneity on the CO2 state after injection.

29 March 2021 in Energies
Verified
Journal Article
Open access
PDF file
ATAmir Taheri
Amir Taheri
JYJan David Ytrehus
Jan David Ytrehus
BLBjørnar Lund
Bjørnar Lund
MTMalin Torsæter
Malin Torsæter
We present the results of the displacement flows of different Newtonian and Herschel–Bulkley non-Newtonian fluids in a new-developed eccentric Hele–Shaw cell with dynamic similarly to real field wellbore annulus during primary cementing. The possibility of tracking the interface between the fluids using particles with intermediate or neutral buoyancy is studied. The behaviors and movements of particles with different sizes and densities against the primary vertical flow and strong secondary azimuthal flow in the eccentric Hele–Shaw cell are investigated. The effects of fluid rheology and pumping flow rate on the efficiency of displacement and tracing particles are examined. Moreover, the behavior of pressure gradients in the cell is described and analyzed. Successful results of tracing the interface using particles give us this opportunity to carry out a primary cementing with high quality for the cases that the risk of leakage is high, e.g., primary cementing in wells penetrating a CO2 storage reservoir.