The sensing performance comparisons presented in this work were carried out by exploiting a suitable magneto-plasmonic sensor in both the traditional surface plasmon resonance configuration and the innovative magneto-optic surface plasmon resonance one. The particular multilayer transducer was functionalized with TiO₂ Brookite nanorods layers deposited by matrix assisted pulsed laser evaporation, and its sensing capabilities were monitored in a controlled atmosphere towards different concentrations of volatile organic compounds mixed in dry air.

Arrays of metal nano-holes have proved to be among of the most promising structures for applications in the field of nano-photonics and optoelectronics. Supporting both localized and propagating surface plasmons resonances, they are characterized by very high versatility thanks to the tunability of these modes, by means of the change of their periodicity, the size of the holes and metal composition. The interaction between different optical features can be exploited to modulate electromagnetic field distribution leading various hot-spots excitations on the metal surfaces. In this work, long range ordered arrays of nano-holes in thin gold films, with different geometrical characteristics, were fabricated by a modified nano-sphere lithography protocol, which allows precise control on holes’ dimensions together with the preservation of the order and of the pristine periodicity of the array. An in-depth analysis of the correlation between surface plasmon modes interference and its effect on electromagnetic field distribution is proposed, both by numerical simulations and experimentally. Finally, metal nano-holes arrays are exploited for surface enhanced Raman experiments, evaluating and comparing their performances by the estimation of the enhancement factor. Values close to the single molecule detection are obtained for most of the samples, proving their potentialities in surface enhanced spectroscopy applications.

The outer membrane of Gram-negative bacteria contains bacterial endotoxins known as Lipopolysaccharides (LPS). Owing to the strong immune responses induced in humans and animals, these large molecules have a strong toxic effect that can cause severe fever, hypotension, shock, and death. Endotoxins are often present in the environment and medical implants and represent undesirable contaminations of pharmaceutical preparations and medical devices. To overcome the limitations of the standard technique, novel methods for early and sensitive detection of LPS will be of crucial importance. In this work, an interesting approach for the sensitive detection of LPS has been realized by exploiting optical features of nanoplasmonic transducers supporting Localized Surface Plasmon Resonances (LSPRs). Ordered arrays of gold nano-prisms and nano-disks have been realized by nanospheres lithography. The realized transducers have been integrated into a simple and miniaturized lab-on-a-chip (LOC) platform and functionalized with specific antibodies as sensing elements for the detection of LPS. Interactions of specific antibodies anchored on protein A-modified sensor chips with the investigated analyte resulted in a spectral shift in the plasmonic resonance peak of the transducers. A good linear relationship between peak shifts and the LPS concentration has been demonstrated for the fabricated nano-structures with a detection limit down to 5 ng/mL. Integration with a proper microfluidic platform demonstrates the possibility of yielding a prototypal compact device to be used as an analytical test for quality determination of pharmaceutical products.

Recently, great effort has been invested into nanofabrication approaches that allow fast, reproducible and parallel surface patterning over a large area at the nanoscale. Here, a simple and reproducible approach for the fabrication of a large area highly ordered array of metal nanostructures by nanosphere lithography (NSL) is presented. Based on the self-assembly of close-packed polystyrene (PS) particles, at the air/water interface, this cost-effective approach enables the fabrication of a large-area and transferrable colloidal mask with a high quality crystal-like structure. An interesting tool based on optical diffraction for non-invasive inspection of the monolayer quality to perform in situ monitoring of the colloid packing at the air/water interface before deposition onto solid substrates was developed. Exploiting the interstitial geometry of the colloidal mask, a periodic array of plasmonic nanostructures was easily prepared. Tailoring the optical response of metal nanoparticle assemblies by controlling their morphology to route and manipulate light at the nanoscale is a key topic in the field of nano-optics; to this aim, exploitation of a low-cost nanofabrication technique, allowing a dynamic tunability either in morphology and periodicity arrangement, can be of remarkable added value in a cost-effectiveness evaluation. Here, the versatility of the NSL technique, coupled to a proper annealing post-processing is demonstrated to meet the above needs, allowing parallel surface patterning of large area metal assemblies in a hexagonal periodic configuration and morphology tuning from three dimensional nanoprisms to zero dimensional nanodot profiles. Related optical properties were monitored by UV-vis spectroscopy investigations and compared with proper theoretical analysis and numerical simulation.

Functionalized plasmonic nanostructure platforms are widely used for developing optical biosensors and SERS assays. In this work, we present a low-cost and scalable surface-enhanced Raman scattering (SERS) system based on an innovative optical transducer comprising gold nanoparticles (AuNPs) embedded in nano-fibrillated bacterial cellulose (BC). The AuNPs@BC composite leverages the unique nanofibrillar architecture of bacterial cellulose, which provides a high surface area, flexibility, and uniform nanoparticle distribution, enabling the formation of numerous electromagnetic “hot spots”. This structure excites localized surface plasmon resonance (LSPR), as demonstrated by a bulk sensitivity of 72 nm/RIU, and supports enhanced Raman signal amplification. The eco-friendly and disposable AuNPs@BC platform was tested for agrifood applications, focusing on the detection of thiram pesticide. The system achieved a detection limit of 0.24 ppm (1 µM), meeting the sensitivity requirements for regulatory compliance in food safety. A strong linear correlation (R² ≈ 0.99) was observed between the SERS peak intensity at 1370 cm⁻¹ and thiram concentrations, underscoring its potential for quantitative analysis. The combination of high sensitivity, reproducibility, and environmental sustainability makes the AuNPs@BC platform a promising solution for developing cost-effective, flexible, and portable sensors for pesticide monitoring and other biosensing applications.

Conventional nano-sphere lithography techniques have been extended to the fabrication of highly periodic arrays of sub-wavelength nanoholes in a thin metal film. By combining the dry etching processes of self-assembled monolayers of polystyrene colloids with metal physical deposition, the complete transition from increasing size triangular nanoprism to hexagonally distributed nanoholes array onto thin metal film has been gradually explored. The investigated nano-structured materials exhibit interesting plasmonic properties which can be precisely modulated in a desired optical spectral region. An interesting approach based on optical absorbance measurements has been adopted for rapid and non-invasive inspections of the nano-sphere monolayer after the ion etching process. By enabling an indirect and accurate evaluation of colloid dimensions in a large area, this approach allows the low-cost and reproducible fabrication of plasmonic materials with specifically modulated optical properties suitable for many application in biosensing devices or Raman enhanced effects.