The Zagreb 2020 earthquake severely damaged the historic centre of the city. Most of the damage occurred on historic masonry residential buildings, many of which are situated very close to the tram track. Although traffic-induced vibrations generally do not affect surrounding buildings, they can be harmful to buildings damaged by a previous earthquake. Vibrations could contribute to the further propagation of existing cracks. The effect of vibrations depends on many factors, one of the most important being the distance between the track and the building. The vibrations are highest at the source, and the energy loss occurs due to transfer through the soil to the recipients. The impact of tram-induced vibrations on earthquake-damaged buildings in the city of Zagreb is investigated in this paper. The analysis is conducted on a tramway network scale to identify critical locations by performing continuous monitoring on the tramway network and risk analysis based on the distance of buildings from the track, vibration amplitude at source, and building damage. Further investigation is based on the level of buildings to evaluate the influence of vibrations on actual buildings damaged in the Zagreb earthquake. Based on detailed signal analysis, the vibration characterization is performed, and the influence on damaged masonry buildings is evaluated.

Urban road infrastructure is daily burdened by heavy traffic volume. Pavement structure roughness observations are significantly more difficult in urban agglomerations than on roads in unpopulated areas. Roughness, expressed by IRI (International Roughness Index), directly affects the quality and safety of road traffic. Within the framework of the pavement management in relation to safety and the achievement of the best possible ride comfort, it is very important to foresee when a road should be reconstructed. The method for quality evaluations of safety and ride comfort on urban roads presented in this paper is based on vehicle vibrations measurements. In the article, measuring of vehicle vibrations was performed on the main urban roads in Zagreb (Croatia). Measurements covered roads with different pavement surface roughness. This method can be simply and very easily used in pavement management aimed at achieving road safety and better ride comfort. The results of measurements according to this method could be used by traffic and civil engineering experts as an indication for the roads that require reconstruction or maintenance. KEY WORDS: urban roads, traffic flow, safety, vehicle vibrations, road surface roughness (IRI)

Tram system is a backbone of public transportation in the City of Zagreb. In the last decade, its fleet has been renewed by 142 new low-floor trams. Shortly after their introduction, it was observed that they have a negative impact on the exploitation behavior of tram infrastructure, primarily on the durability of rail fastening systems. Because of that, it was decided to modify existing rail fastening systems to the new track exploitation conditions. When the (re)construction of tram infrastructure is carried out by applying new systems and technologies, it is necessary to take into account their impact on the future propagation of noise and vibration in the environment. This paper gives a short overview of the characteristics of the two newly developed rail fastening systems for Zagreb tram tracks, their application in construction of experimental track section, and performance and comparison of noise and vibration measurements results. Measured data on track vibrations and noise occurring during passage of the tram vehicles is analyzed in terms of track decay rates and equivalent noise levels of passing referent vehicle. Vibroacoustic performance of new fastening systems is evaluated and compared to referent fastening system, in order to investigate their ability to absorb vibration energy induced by tram operation and to reduce noise emission.

Urban railway tracks are the primary modes of transportation in many cities worldwide. Track vehicles mostly use DC from overhead lines, and rails are used as return conductors. Because it is challenging to fully insulate the rail and ensure high rail-to-ground resistance, current leaks from the rail to the lower part of the track. This current is referred to as stray current. To determine the detrimental effects of stray current on the rail and fastening system components, we performed a laboratory simulation of the stray current on four real-scale samples of the entire rail with all fastening components. The difference among these four samples was the type of fastening system used. Tests were performed under dry condition and at different water levels. After testing, the samples were visually inspected. Under dry conditions, corrosion occurred on the elements in contact with the concrete, and under immersed conditions, the current leaked from all components of the fastening system directly into the water, causing harmful local deterioration. The characteristics of the fastening systems are defined to satisfy other parameters, but not to prevent stray currents and ensure high rail-to-ground resistance. The aim of this study was to demonstrate the effects of stray current on the rail and fastening system and to prove the importance of providing adequate drainage of the track and using a fastening system that is insulated and does not allow the current to leak from the rail.

In the track quality analysis, numerical values representing the relative condition of track geometry called track quality indices (TQIs) are calculated along a specific track segment. Segments are defined as linear track geometry datasets with the homogeneous characteristics of factors affecting geometry degradation. The 200m-long analytical segment is used most often on inter-city conventional and high-speed rail networks. However, in the case of the small urban rail networks, the homogeneity of track-geometry degradation influential factors is very low. This segment length is usually too long for efficient track maintenance or reconstruction with minimal disruption of the urban traffic. This paper explores the effect of reducing the analytical segment length in the condition assessment of the tram network in the City of Osijek, Croatia. The research had two main objectives: (1) to assess the narrow-gauge tram-track geometry quality through the application of the established synthesized TQIs, and (2) to analyze how a change in the analytical segment length affects this assessment. Two synthesized track quality indices—one based on a weighted value and the other on a standard deviation of measured track geometry parameters—were calculated for the 27.5 km of tracks on consecutive 200-, 100-, 50-, and 25 m long analytical segments. The comparative analysis of the TQIs’ calculation results showed that the reduction in the segment length increased the resolution of the track quality analysis in both cases, while the index based on a weighted value of geometry deviations proved less sensitive to this reduction. These results contribute to further segmentation process establishment and TQIs implementation on tram infrastructure.

Despite the long-term experience in the application of noise walls, the uncertainty in wall panel service life efficiency is almost equal between panels built from established and new materials, which are—because of the desire to increase the sustainability of noise walls—developing at an ever-faster pace. The presented meta-analysis of data collected during a systematic review of concrete, metal, and wood panels’ acoustic and non-acoustic characteristics, long term performance, and cradle-to-gate sustainability aims to reduce this uncertainty and support the process of noise wall design and management by shifting the emphasis in decision making from construction costs to the long-term sustainability of the road traffic noise mitigation project. The multi-criterial analysis showed that when choosing a panel, preference should be given to those using lightweight concrete materials. A further comprehensive cradle-to-grave assessment of lightweight concrete panels with expanded clay and recycled tire rubber aggregates, which was performed to fill a knowledge gap observed in the literature and identify opportunities for the improvement of lightweight concrete sustainability, showed that the main environmental impacts of these panels are due to their production processes and that the way to reduce such impacts is to use panels made with aggregates from secondary raw materials.