Samoel Mahdi Saleh

Samoel Mahdi Saleh


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2022 in Buildings
Verified
Journal Article
Open access
PDF file
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh
FMFareed Hameed Majeed
Fareed Hameed Majeed
This study investigated the use of self-compacting concrete (SCC) made with recycled coarse aggregates (RCAs), which represents a trend of producing environment-friendly concrete, integrated with hot-rolled steel sections by means of headed stud shear connectors in composite structures. Therefore, thirty-six push-out test specimens were examined to assess the shear strength and behavior of the headed stud connectors embedded in RCA-SCC, with the concrete compressive strength, stud diameter, and RCA ratio as the main variables. Four ratios of RCAs ranging from 0 to 60% were used to produce concrete with three different compressive strengths (25, 33, and 40 MPa) for each one. It was found that the use of SCC with RCAs had a negative effect on the shear strength of headed stud connectors. This negative effect could be reduced by increasing the concrete compressive strength and/or the stud diameter. Similarly, a reduction in the shear stiffness of the tested specimens was inversely proportional to the RCA ratio, while the ultimate slip was directly proportional to the RCA ratio. An evaluation of the test results was made by comparing them with those determined by Eurocode 4 and AASHTO LRFD.

1 October 2021 in Turkish Journal of Engineering
Verified
Journal Article
Closed access
PDF file
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh
IAIhsan Al-abboodi
Ihsan Al-abboodi
As a result of the excellent performance under different loading conditions, concrete-filled steel tubular (CFST) stub columns are extensively used recently. The current study employs a 3D finite element analysis to assess the response of (CFST) stub columns when subjected to axial compression. The effect of some parameters of concrete and the confining steel tube where numerically investigated. The steel was considered as an elastic perfectly plastic material, whereas a damage plasticity behaviour was adopted for the concrete material. Analysis results suggested that the ultimate strength of concrete increases with the increase of its grade. On the other hand, increasing magnitudes of concrete grade caused a reduction in the ductility of the composite columns. Also, the increase in the steel yields stress, and the steel tube wall thickness contributes to an increase in the columns’ ultimate strength. However, they reduce the action of the concrete grade that increases the column’s ultimate strength. It was also noted that the ductility that the circular CFST stub columns showed is larger than that for square columns. Thus, the use of square CFST columns with high strength concrete, especially in seismically active areas, should be carefully considered.

14 September 2022 in Fibers
Verified
Journal Article
Open access
PDF file
MMMAZEN AL MALIKI
MAZEN AL MALIKI
FMFareed Hameed Majeed
Fareed Hameed Majeed
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh
In order to improve the strength of concrete structures, the fiber reinforcement of concrete has become an essential factor. This study was conducted as an experimental program to gain a better understanding of how the variance of fiber shape and type affect the structural performance of solid and hollow reinforced concrete beams using four types of fiber (hooked-end, straight, corrugated steel fiber, and polyolefin fiber) under torsion. For this purpose, ten fiber-reinforced concrete beam specimens, five solid and five hollow, with square cross sections were fabricated using the adopted types of fiber. The role of fiber type in the improvement of the mechanical properties of hardened concrete was also investigated. The results revealed that the mechanical properties of the hardened concrete mix was enhanced by using the existing fiber in concrete, and the higher improvement was shown in the splitting tensile strength test and modulus of rapture in specimens with corrugated steel fiber. The torsional behavior of solid and hollow beams was improved significantly, and the capacity of torsional strength was especially improved for the beams strengthened with corrugated steel fiber. Straight and polyolefin fiber showed a slight improvement in the concrete mechanical properties and less enhancement in the torsional capacity of the tested beams. However, the tested beams reinforced by polyolefin fiber provide better ductility under torsion compared with the use of other types of fiber.

1 November 2023 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
BHBayadir Abed Hadi
Bayadir Abed Hadi
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh
This study investigated the use of lightweight self-compacting concrete (LWSCC), which represents a trend in producing high-performance concrete, as slabs in steel-concrete composite beams with headed studs as shear connectors. Three push-out test specimens were fabricated and tested to assess the shear strength and behavior of M16-headed stud connectors embedded in LWSCC. Based on the push-out test results, six steel-LWSCC composite beams were manufactured and tested as simply supported composite beams. In addition, a steel-normal weight self-compacting concrete (NWSCC) composite beam specimen with full shear interaction was manufactured and tested for comparison. The main variables taken into account in this study were the degree of shear interaction and regions of bending moment (sagging or hogging). It was observed that the increase in degree of shear interaction from 50 to 100% improved the ultimate carrying capacity, the service load, and the stiffness of the tested steel-LWSCC beam specimens by a ratio reached to 96, 95, and 122%, respectively, when subjected to sagging bending moments and by a ratio reached to 57, 59, and 134%, respectively, when subjected to hogging bending moments. In addition, it was noted that the deflection and the end slip values for steel-LWSCC specimens under a sagging bending moment are smaller than those under a hogging bending moment, which have the same degree of shear interaction and at the same load level. Moreover, the experimental results show that the ultimate carrying capacity, service load, and stiffness values for the steel-NWSCC composite beam were higher than those for the steel-LWSCC beam specimens that have the same properties, while the ultimate deflection and end slip were smaller. Doi: 10.28991/CEJ-2023-09-11-04 Full Text: PDF

1 January 2023 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh
FMFareed H. Majeed
Fareed H. Majeed
OAOsamah Al-Salih
Osamah Al-Salih
HHHaleem K. Hussain
Haleem K. Hussain
The structural performance of a steel-concrete-steel sandwich beam (SCSSB) with welded stirrups to the steel skin plates as shear connections exposed to a pure torsion load was studied in this paper. Eight SCSSB specimens were fabricated and tested under pure torsion. The effects of the compressive strength of the concrete core, 26 and 35 MPa, the thickness of the top and bottom steel skin plates, 2 and 4 mm, and the degree of shear interaction, which represents the number of beam stirrups, between the steel skin plates and the concrete core are 75, 100, and 125%. The experiment beams revealed a similar mode of failure for all SCSSB specimens regarding all considered variables, which started with inclined cracks along the specimens’ side faces and ended with local separation between one of the steel skin plates (top or bottom) and the concrete core. In addition, the experiment results showed an increase in the torsional strength with the increase in the shear connection ratio and the thickness of the steel skin plate, as well as with the increase in the strength of the concrete core. However, it was observed that the torsional ductility of the tested beams is proportional directly to the steel skin plate thickness and degree of interaction and inversely with the concrete compressive strength. The results showed that the use of steel skin plates with welded stirrups as a shear connection could reduce the negative effect of increasing the compressive strength of the concrete core on the torsional ductility of SCSSB. Doi: 10.28991/CEJ-2023-09-01-016 Full Text: PDF

16 November 2024
Verified
Book Chapter
Closed access
PDF file
TITariq Emad Ibrahim
Tariq Emad Ibrahim
OAOday A. Abdulrazzaq
Oday A. Abdulrazzaq
SSSamoel Mahdi Saleh
Samoel Mahdi Saleh