The lithium-ion battery (LIB) is a promising energy storage system that has dominated the energy market due to its low cost, high specific capacity, and energy density, while still meeting the energy consumption requirements of current appliances. The simple design of LIBs in various formats—such as coin cells, pouch cells, cylindrical cells, etc.—along with the latest scientific findings, trends, data collection, and effective research methods, has been summarized previously. These papers addressed individual design parameters as well as provided a general overview of LIBs. They also included characterization techniques, selection of new electrodes and electrolytes, their properties, analysis of electrochemical reaction mechanisms, and reviews of recent research findings. Additionally, some articles on computer simulations and mathematical modeling have examined the design of full-cell LIBs for power grid and electric vehicle applications. To fully understand LIB operation, a simple and concise report on design parameters and modification strategies is essential. This literature aims to summarize the design parameters that are often overlooked in academic research for the development of full-cell LIBs.

Hitherto, most research has primarily focused on improving the UV sensor efficiency via surface treatments and by stimulating the ZnO nanorod (ZNR) surface Schottky barriers. However, to the best of our knowledge, no study has yet probed the intrinsic crystal defect generation and its effects on UV sensor efficiency. In this study, we undertake this task by fabricating an intrinsic defect-prone hydrothermally grown ZNRs (S1), Ga-doped ZNRs (S2), and defect-free microwave-assisted grown ZNRs (S3). The defect states were recognized by studying X-ray diffraction and photoluminescence characteristics. The large number of crystal defects in S1 and S2 had two pronged disadvantages. (1) Most of the UV light was absorbed by the defect traps and the e–h pair generation was compromised. (2) Mobility was directly affected by the carrier–carrier scattering and phonon scattering processes. Hence, the overall UV sensor efficiency was compromised based on the defect-induced mobility-response model. Considering the facts, defect-free S3 exhibited the best UV sensor performance with the highest on/off ratio, the least impulse response time, the highest recombination time, and highest gain-induced responsivity to 368 nm UV light, which was desired of an efficient passive metal oxide-based UV sensor. Our results were compared with the recently published results.

Several electrode materials have been developed to provide high energy density and a long calendar life at a low cost for lithium-ion batteries (LIBs). Iron (III) vanadate (FeVO₄), a semiconductor material that follows insertion/extraction chemistry with a redox reaction and provides high theoretical capacity, is an auspicious choice of anode material for LIBs. The correlation is investigated between calcination temperatures, morphology, particle size, physicochemical properties, and their effect on the electrochemical performance of FeVO₄ under different binders. The crystallite size, particle size, and tap density increase while the specific surface area (S_BET) decreases upon increasing the calcination temperature (500 °C, 600 °C, and 700 °C). The specific capacities are reduced by increasing the calcination temperature and particle size. Furthermore, FeVO₄ fabricated with different binders (35 wt.% PAA and 5 wt.% PVDF) and their electrochemical performance for LIBs was explored regarding the effectiveness of the PAA binder. FV500 (PAA and PVDF) initially delivered higher discharge/charge capacities of 1046.23/771.692 mAhg⁻¹ and 1051.21/661.849 mAhg⁻¹ compared to FV600 and FV700 at the current densities of 100 mAg⁻¹, respectively. The intrinsic defects and presence of oxygen vacancy along with high surface area and smaller particle sizes efficiently enhanced the ionic and electronic conductivities and delivered high discharge/charge capacities for FeVO₄ as an anode for LIBs.

The crumpled N-doped reduced graphene oxide wrapped Mn(3)O(4)nanorods (Mn-NrGO) composite are synthesized via a combination of spray pyrolysis and a hydrothermal process for lithium ion batteries. The Mn(3)O(4)nanorods are uniformly dispersed in the conductive matrix of crumpled N-doped reduced graphene oxide, forming a uniform wrapped composite and stopping them from restacking, which synergistically enhanced the Li(+)ion conductivity. The well-defined Mn(3)O(4)nanorods, strong interaction between Mn(3)O(4)and NrGO, and highly graphitic properties of Mn-NrGO result in superior reversible capacity, long cycle life, and superior rate performance of approximately 1500 mAh/g at 0.1 C after 100 cycles and >660S mAh/g at 1.0 C after 500 cycles.

Low-cost, vanadium-based mixed metal oxides mostly have a layered crystal structure with excellent kinetics for lithium-ion batteries, providing high energy density. The existence of multiple oxidation states and the coordination chemistry of vanadium require cost-effective, robust techniques to synthesize the scaling up of their morphology and surface properties. Hydrothermal synthesis is one of the most suitable techniques to achieve pure phase and multiple morphologies under various conditions of temperature and pressure. We attained a simple one-step hydrothermal approach to synthesize the reduced graphene oxide coated Nickel Vanadate (rGO@Ni₃V₂O₈) composite with interconnected hollow microspheres. The self-assembly route produced microspheres, which were interconnected under hydrothermal treatment. Cyclic performance determined the initial discharge/charge capacities of 1209.76/839.85 mAh g⁻¹ at the current density of 200 mA g⁻¹ with a columbic efficiency of 69.42%, which improved to 99.64% after 100 cycles. High electrochemical performance was observed due to high surface area, the porous nature of the interconnected hollow microspheres, and rGO induction. These properties increased the contact area between electrode and electrolyte, the active surface of the electrodes, and enhanced electrolyte penetration, which improved Li-ion diffusivity and electronic conductivity.