This work investigated the feasibility of using a miniaturised non-standard tensile specimen to predict the post-necking behaviour of the materials manufactured via a rapid alloy prototyping (RAP) approach. The experimental work focused on the determination of the Lankford coefficients (r-value) of dual-phase 800 (DP800) steel and the digital image correlation (DIC) for some cases, which were used to help calibrate the damage model parameters of DP800 steel. The three-dimensional numerical simulations focused on the influence of the size effect (aspect ratio, AR) on the post-necking behaviour, such as the strain/stress/triaxiality evolutions, fracture angles, and necking mode transitions. The modelling showed that although a good correlation can be found between the predicted and experimentally observed ultimate tensile strength (UTS) and total elongation. The standard tensile specimen with a gauge length of 80 mm exhibited a fracture angle of ∼55°, whereas the smaller miniaturised non-standard specimens with low ARs exhibited fractures perpendicular to the loading direction. This shows that care must be taken when comparing the post-necking behaviour of small-scale tensile tests, such as those completed as a part of a RAP approach, to the post-necking behaviours of standard full-size test specimens. However, the modelling work showed that this behaviour is well represented, demonstrating a transition between the fracture angles of the samples between 2.5 and 5. This provides more confidence in understanding the post-necking behaviour of small-scale tensile tests.
7 August 2002 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Design optimization of beam-like ferroelectrics-silicon integrated microphone and microspeaker is studied. The Pt/Pb(Zr,Ti)O/sub 3//Pt/SiO/sub 2//Si/sub 3/N/sub 4/ cantilever structure is designed theoretically using multimorph model. The sensitivity and the sound pressure level (SPL) of the integrated microphone and microspeaker are calculated. It is found that the sensitivity of the microphone and the SPL of the microspeaker are very high. This integrated microphone and microspeaker will be valuable for high quality micro-acoustic devices.
19 January 2022 in Metallurgical and Materials Transactions B