In the present work, SiO₂micro/nanocomposites based on poly-lactic acid (PLA) and an epoxy resin were prepared and experimentally studied. The silica particles were of varying sizes from the nano to micro scale at the same loading. The mechanical and thermomechanical performance, in terms of dynamic mechanical analysis, of the composites prepared was studied in combination with scanning electron microscopy (SEM). Finite element analysis (FEA) has been performed to analyze the Young’s modulus of the composites. A comparison with the results of a well-known analytical model, taking into account the filler’s size and the presence of interphase, was also performed. The general trend is that the reinforcement is higher for the nanosized particles, but it is important to conduct supplementary studies on the combined effect of the matrix type, the size of the nanoparticles, and the dispersion quality. A significant mechanical enhancement was obtained, particularly in the Resin/based nanocomposites.

In this paper, undoped, Al-, and In-doped zinc oxide thin films were deposited. Film growth was performed using the sol–gel technique. The method included (a) preparing homogeneous and stable solutions of zinc acetate 2-hydrate, (b) mixing them with aluminum nitrate and indium acetate in 2-methoxyethanol and 2-aminoethanol solutions with various concentrations, and (c) spin coating them onto transparent glass substrates. After thermal annealing, the films showed a high transparency (80–90%) and good stability. Using typical diagnostic tools, the structural, morphological, optical, and electrical film properties were investigated and linked to the dopant type, and concentrations in view of optoelectronics were investigated.

The development of new aqueous conjugated polymer nanoparticles with high photoluminescence quantum yields (PLQYs) at the far red and near infrared (NIR) spectral regions (>650 nm) as alternative polymer probes for fluorescence imaging is reported.