The article discusses the use of pivot bearing friction liners, made of selected materials, in railway freight wagons’ spherical centre bowls. Comparative studies on the effect of suspension dynamics on the equivalent stresses in the liner material were carried out using the finite element method and multibody simulation. The results show the magnitude and location of the highest stresses in the liner with varying input loads, friction coefficients and interacting materials. The analysis is a basis for a simulation method for predicting the fatigue life of the suspension friction liner placed in the centre bowl between the bogie frame and the vehicle body.

The research described in this paper aimed to verify the impact of road vehicle aging on air pollutant emissions. The problem of vehicle aging and the resulting changing air pollutant emissions was identified with the operational mileage of passenger cars. The validity of such an approach to research on air pollutant emissions changing over time was confirmed by a preliminary review of publications in scientific databases such as Scopus and Web of Science. The research problem presented in this paper was to assess the impact of vehicle aging on essential air pollutant emissions (CO, CO₂, NO_X). The research method included measuring the actual RDE air pollutant emissions using research equipment, i.e., the SEMTECH DS gaseous exhaust gas component analyzer. This study was conducted on vehicles with diesel engines, different operating ages, different mileages, and engines with similar displacement, mostly 1.9–2.0 dm³, and equipped with manual transmissions. The tests were conducted in the Poznań agglomeration. The results of measured air pollutant emissions in the RDE mode allowed for mapping the changes in air pollutant emissions for diesel engine vehicles with similar displacement as a function of operating age (mileage) and also for collecting preliminary data for analyses in the field of modeling road air pollutant emissions within the vehicle aging phenomenon.

This paper presents the problem of vibrations generated by the transport infrastructure. Two aspects of influence on the environment are presented: the harmful influence of vibration on people, and effect on engineering objects. Content of work concerns the identification of dynamical influences, planning of studies, building of models, and validation of their parameters. Simulation methods, based on conducting the experimental pilot studies each time, for the purpose of analysis were presented. In this document, particular attention was paid to the identification of vibration’s sources, propagation and evaluation of the vibrations’ impact caused by transport means, and operated transport infrastructure. This paper illustrates steps in the research within the analysis, summarizes the existing evaluation methods, and indicates an effective evaluation way for the study area and transparent interpretation level of dynamic influences.

This paper presents an example of low-floor trams simulation tests. The tram under study was unique because of using the system of independently rotating wheels in the bogie IRW (“Chudzikiewicz et al., in: The structural design of a modern, completely low-floor tram with independently rotating wheels (Report in Polish) NCBiR—DEMONSTRATOR+, Warsaw University of Technology Faculty of Transport—PESA Bydgoszcz, 2014 ”). In this paper, the dynamic behavior of the vehicle was examined, and the phenomenon of wheels and rails wear, during the rolling contact, was subjected to the identification. For this purpose, a dedicated computational model was built in MATLAB environment, taking into account the phenomenon of kinematic pair wear using Archard’s model.

In this work, the problematic identification of the main sources of noise occurring from the exploitation of railway vehicles moving at a speed of 200 km/h were analyzed. Within the conducted experimental research, the testing fields were appointed, measurement apparatus selected, and a methodology for conducting measurements was defined, including the assessment of noise on a curve and straight track for electric multiple units of the so-called Pendolino, an Alstom type ETR610 series ED25 train. The measurements were made using a microphone camera Bionic S-112 at a distance of 22 m from the track axis. As a result of the conducted experimental research, it was indicated that the noise resulting from vibrations arising at the wheel-rail contact (rolling noise) was the dominant source of sound.

The purpose and scope of this paper are to provide guidance of the potential impacts of being subjected to high level noise recorded on 1st generation (30 years old) floating storage and offloading vessels (FSO) in sector offshore. The international community recognizes that vibroacoustic impacts from commercial ships may have negative consequences for both humans (worker’s) and marine life, especially marine mammals. As regards the effect of noise on human health, there are legal requirements imposing the noise exposure control on personnel working on ships. The acceptable noise exposure standards are established in European Union Directive 2003/10/EC (2003), the NOPSEMA Regulation (2006), the Maritime Labor Convention (MLC) guidelines (2006), and the recommendations of the International Maritime Organization IMO contained, e.g., IMO MEPC.1/Circ.833 (2014). These regulations inform employers and employees what they must do to effectively protect both the marine environment and the health and life safety of workers employed in the maritime industry offshore. This study also presents an analysis of the results of noise measurements carried out on exemplary 1st generation FSO units.