The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.

The preparation of highly porous magnetic crosslinked aggregates (pm-CLEA) of porcine pancreas lipase (PPL) is reported. Some strategies to improve the volumetric activity of the immobilized biocatalyst were evaluated, such as treatment of PPL with enzyme surface-modifying agents (polyethyleneimine or dodecyl aldehyde), co-aggregation with protein co-feeders (bovine serum albumin and/or soy protein), use of silica magnetic nanoparticles functionalized with amino groups (SMNPs) as separation aid, and starch as pore-making agent. The combination of enzyme surface modification with dodecyl aldehyde, co-aggregation with SMNPs and soy protein, in the presence of 0.8% starch (followed by hydrolysis of the starch with α-amylase), yielded CLEAs expressing high activity (immobilization yield around 100% and recovered activity around 80%), high effectiveness factor (approximately 65% of the equivalent free enzyme activity) and high stability at 40 °C and pH 8.0, i.e., PPL CLEAs co-aggregated with SMNPs/bovine serum albumin or SMNPs/soy protein retained 80% and 50% activity after 10 h incubation, respectively, while free PPL was fully inactivated after 2 h. Besides, highly porous magnetic CLEAs co-aggregated with soy protein and magnetic nanoparticles (pm-SP-CLEAs) showed good performance and reusability in the hydrolysis of tributyrin for five 4h-batches.

Eversa^® Transform 2.0 has been launched to be used in free form, but its immobilization may improve its performance. This work aimed to optimize the immobilization of Eversa^® Transform 2.0 by the crosslinked enzyme aggregates (CLEAs) technique, using almost all the available tools to improve its performance. Several variables in the CLEA preparation were optimized to improve the recovered activity, such as precipitant nature and crosslinker concentration. Moreover, some feeders were co-precipitated to improve the crosslinking step, such as bovine serum albumin, soy protein, or polyethyleneimine. Starch (later enzymatically degraded) was utilized as a porogenic agent to decrease the substrate diffusion limitations. Silica magnetic nanoparticles were also utilized to simplify the CLEA handling, but it was found that a large percentage of the Eversa activity could be immobilized on these nanoparticles before aggregation. The best CLEA protocol gave a 98.9% immobilization yield and 30.1% recovered activity, exhibited a porous structure, and an excellent performance in the transesterification of soybean oil with ethanol: 89.8 wt% of fatty acid ethyl esters (FAEEs) yield after 12 h of reaction, while the free enzyme required a 48 h reaction to give the same yield. A caustic polishing step of the product yielded a biodiesel containing 98.9 wt% of FAEEs and a free fatty acids content lower than 0.25%, thus the final product met the international standards for biodiesel. The immobilized biocatalyst could be reused for at least five 12 h-batches maintaining 89.6% of the first-batch yield, showing the efficient catalyst recovery by applying an external magnetic field.

Rigorous evidence reviews must follow specific guidelines designed to improve transparency, reproducibility, and to minimize biases to which traditional reviews are susceptible. While evidence synthesis methods, such as systematic reviews and maps, have been used in several research fields, the majority of reviews published in the realm of chemical engineering are nonsystematic. In this study, we incorporated principles of systematic mapping to conduct a literature review covering research on the synthesis of sugar fatty acid esters (SFAE) with Candida antarctica lipase B (CALB). Our results showed that the simple monosaccharides were the most cited sugars among studies we conducted. The direct use of renewable raw materials and frequently available resources to produce alternative sugar esters (SE) was scarcely reported in our data set. We found that free fatty acids (FFA) were the most commonly cited acyl donors amongst all publications, with lauric, oleic, and palmitic acids accounting for ∼43% of the occurrences. Tertiary alcohols (ter-butyl alcohol (T-but) and 2-methyl-2-butanol (2M2B)) and ionic liquids were the most used solvents to synthesize SE. The co-occurence analysis of keywords involving solvent terms showed that most of the papers evaluated different solvents as reaction media (mostly in the form of a bisolvent system), also investigating the impact of their choice on sugar ester productivities. Given the potential of reviews informing us of research decisions, this article reveals trends and spaces across CALB-catalyzed SE synthesis research, in addition to introducing a new methodological perspective for developing reviews in the field of chemical engineering.

Liquid Eversa was evaluated in hydrolysis of acylglycerols from soybean oil deodorizer distillate (SODD), as well as simultaneous esterification/transesterification of SODD with low-to-high free fatty acids (FFAs) content using ethanol as acyl acceptor. Hydrolysis of SODD at mild temperature (37 °C) and without pH control (water:SODD mass ratio of 4:1) increased its FFAs content from 17.2 wt.% to 72.5 wt.% after 48 h reaction. A cold saponification of SODD allowed a saponification phase (SODD-SP) to be recovered with 93 wt.% saponification index and 2.25 wt.% FFAs content, which was used to find the experimental conditions for simultaneous esterification/transesterification reactions by experimental design. Temperature of 35 °C, enzyme concentration of 8.36 wt.%, and molar ratio of 3.64:1 (ethanol:SODD-SP) were found as the best conditions for fatty acid ethyl esters (FAEEs) production from SODD-SP (86.56 wt.% ester yield after 23 h reaction). Under the same reaction conditions, crude SODD (17.2 wt.% FFAs) and hydrolyzed SODD (72.5 wt.% FFAs) yielded products containing around 80 wt.% FAEEs. Caustic treatment could increase the ester content to around 90 wt.% and reduce the FFAs content to less than 1 wt.%. Our results show the good performance of liquid Eversa in aqueous (hydrolysis reactions) and organic (esterification/transesterification reactions) media.

Lipase from Thermomyces lanuginosus (TLL) has been immobilized on a methacrylate macroporous resin coated with octadecyl groups (Purolite Lifetech^®® ECR8806F). This immobilization protocol gave a biocatalyst with significantly higher stability than that obtained using octyl agarose. To further improve the biocatalyst features, we tried to covalently immobilize the enzyme using this support. For this purpose, the support was activated with divinyl sulfone. The results showed that at least 1/3 of the immobilized enzyme molecules were not covalently immobilized. To solve the problem, we produced an aminated support and then activated it with divinyl sulfone. This permitted the full covalent immobilization of the previously immobilized TLL. The use of different blocking agents as the reaction endpoint (using ethylenediamine, Asp, Gly, and Cys) greatly altered the biocatalyst functional features (activity, specificity, or stability). For example, the blocking with ethylenediamine increased the ratio of the activity versus R- and S-methyl mandelate by a three-fold factor. The blocking with Cys produced the most stable biocatalyst, maintaining close to 90% of the activity under conditions where the just adsorbed enzyme maintained less than 55%. That way, this strategy to modify the support has permitted obtaining an enzyme interfacially activated versus the octadecyl layer and, later, covalently immobilized by reaction with the vinyl sulfone groups.