Some natural structures show three-dimensional morphologies on the micro- and nano- scale, characterized by levels of symmetry and complexity well far beyond those fabricated by best technologies available. This is the case of diatoms, unicellular microalgae, whose protoplasm is enclosed in a nanoporous microshell, made of hydrogenated amorphous silica, called frustule. We have studied the optical properties of Arachnoidiscus sp. single valves both in visible and ultraviolet range. We found photonic effects due to diffraction by ordered pattern of pores and slits, accordingly to an elaborated theoretical model. For the first time, we experimentally revealed spatial separation of focused light in different spots, which could be the basis of a micro-bio-spectrometer. Characterization of such intricate structures can be of great inspiration for photonic devices of next generation.

In this work, two procedures for fabrication of polymeric microneedles based on direct photolithography, without any etching or molding process, are reported. Polyethylene glycol (average molecular weight 250 Da), casted into a silicone vessel and exposed to ultraviolet light (365 nm) through a mask, cross-links when added by a commercial photocatalyzer. By changing the position of the microneedles support with respect to the vessel, different shapes and lengths can be achieved. Microneedles from a hundred microns up to two millimeters have been obtained just tuning the radiation dose, by changing the exposure time (5–15 s) and/or the power density (9–18 mW/cm²) during photolithography. Different microneedle shapes, such as cylindrical, conic or lancet-like, for specific applications such as micro-indentation or drug delivery, are demonstrated.

Inspired by the concept of complementary media, we experimentally demonstrate that an engineered metamaterial made of alternating, stripe layers of negatively refracting (photonic crystals) and positively refracting (air) materials strongly collimates a beam of near-infrared light. This quasi-zero-average-index metamaterial fully preserves the beam spot size throughout the sample for a light beam traveling through the metamaterial a distance of 2 mm—more than 1000 times the input wavelength $\lambda =1.55\mu \mathrm{m}$. These results demonstrate the first explicit experimental verification of optical antimatter as proposed by Pendry and Ramakrishna [J. Pendry and S. Ramakrishna, J. Phys. Condens. Matter 15, 6345 (2003)], using two complementary media in which each $n_{\mathrm{eff}}=-1$ layer appears to annihilate an equal thickness layer of air.

Microneedles (MNs) are an emerging technology in pharmaceutics and biomedicine, and are ready to be commercialized in the world market. However, solid microneedles only allow small doses and time-limited administration rates. Moreover, some well-known and already approved drugs need to be re-formulated when supplied by MNs. Instead, hollow microneedles (HMNs) allow for rapid, painless self-administrable microinjection of drugs in their standard formulation. Furthermore, body fluids can be easily extracted for analysis by a reverse use of HMNs, thus making them perfect for sensing issues and theranostics applications. The fabrication of HMNs usually requires several many-step processes, increasing the costs and consequently decreasing the commercial interest. Photolithography is a well-known fabrication technique in microelectronics and microfluidics that fabricates MNs. In this paper, authors show a proof of concept of a patented, easy and one-shot fabrication of two kinds of HMNs: (1) Symmetric HMNs with a “volcano” shape, made by using a photolithographic mask with an array of transparent symmetric rings; and (2) asymmetric HMNs with an oblique aperture, like standard hypodermic steel needles, made by using an array of transparent asymmetric rings, defined by two circles, which centers are slightly mismatched. Simulation of light propagation, fabrication process, and preliminary results on ink microinjection are presented.