Ultra-high-strength steels (UHSS) combined with tailor-stamping technologies are increasingly being adopted in automotive body production due to crashworthiness improvements and part weight reduction, which meet safety and energy saving demands. Recently, USIBOR®2000 (37MnB5) steel has been added to the family of UHSS. This new material allows higher performance with respect to its predecessor USIBOR®1500 (22MnB5). In this work, the two steels are compared for the manufacturing of an automotive B-Pillar by press-hardening with a tailored tool tempering approach. A Finite Element (FE) model has been developed for the numerical simulation of thermomechanical cycles of the press-hardening process. The FE-simulations have been performed with the aim of obtaining soft zones in the part, by varying the quenching time and the temperature of heated tools. The effects of these parameters on the mechanical properties of the part have been experimentally evaluated thanks to hardness and tensile tests performed on specimens subjected to the numerical thermo-mechanical cycles using the Geeble-3180 physical simulator. The results show that for both UHSS, an increase in quenching time leads to a decrease in hardness up to a threshold value, which is lower for the USIBOR®1500. Moreover, higher mechanical resistance and lower elongation at break values are derived for the USIBOR®2000 steel than for USIBOR®1500 steel.
In recent decades, the automotive industry has had a constant evolution with consequent enhancement of products quality. In industrial applications, quality may be defined as conformance to product specifications and repeatability of manufacturing process. Moreover, in the modern era of Industry 4.0, research on technological innovation has made the real-time control of manufacturing process possible. Moving from the above context, a method is proposed to perform real-time control of a deep-drawing process, using the stamping of the upper front cross member of a car chassis as industrial case study. In particular, it is proposed to calibrate the force acting on the blank holder, defining a regulation curve that considers the material yield stress and the friction coefficient as the main noise variables of the process. Firstly, deep-drawing process was modeled by using commercial Finite Element (FE) software AutoForm. By means of AutoForm Sigma tool, the stability and capability of deep-drawing process were analyzed. Numerical results were then exploited to create metamodels, by using the kriging technique, which shows the relationships between the process parameters and appropriate quality indices. Multi-objective optimization with a desirability function was carried out to identify the optimal values of input parameters for deep-drawing process. Finally, the desired regulation curve was obtained by maximizing total desirability. The resulting regulation curve can be exploited as a useful tool for real-time control of the force acting on the blank holder.
In the deep drawing process, the scatter of the friction coefficient between blank and tool interfaces as well as of the material properties between blank positions in the coil or between different coils significantly influences the part quality. These uncontrollable fluctuations increase the risk of waste. To avoid this problem, currently, the new era of Industry 4.0 aims at developing control algorithms able to in-line adjust process parameters and always meet the part quality requirements. Starting from this context, in this study a method for process control during the punch stroke is proposed. It assumes the blank draw-in in specific points as the control variable, while the blank holder force is adopted as an in-line adjustable process parameter. The approach was implemented for the deep drawing of a T-shaped component, using a blank in DC05 steel with a thickness of 0.75 mm. The results show that the measurement of blank draw-in is a representative index of the component quality, which in this study is evaluated in terms of formability (thinning) and cosmetic (surface deflections) defects. Once the optimal condition and the corresponding blank draw-in were identified, the feedback control algorithm was able to increase or reduce the blank holder force according to whether the recorded draw-in was higher or lower than the optimal one.
Parts with an auxetic structure, which exhibit negative Poisson’s ratio, can be associated with a novel class of smart materials. Such interesting property has been widely explored, over the time, for different applications, i.e., medical, automotive, robotic and aeronautic field. However, the research about the design and analysis of auxetic behavior is still on the way. In this paper, a 2D re-entrant honeycomb structure was realized using material extrusion additive manufacturing technology. Two different materials, acrylonitrile butadiene styrene and carbon fiber-reinforced polyamide were adopted. The technique of digital image correlation was implemented during the tensile test to evaluate over the time and in different areas of specimens the strain behavior of the auxetic structure for both investigated materials. The measured negative Poisson’s ratio confirmed the auxetic behavior of the designed structure. The comparison between the two investigated materials showed a different trend of negative Poisson’s ratio.
The deformation behavior and the constitutive description of materials are important in the design and numerical simulation of manufacturing processes. In this work, the rheological behavior of two quenchable boron steels was derived in the range of interest for the Press Hardening (PH) process. For this study, the following steps were performed: (i) Design of the specimen geometry adopted during the hot tensile tests in the Gleeble®3180 physical simulator. (ii) Performance of hot tensile tests at temperatures between 750 and 850 °C and strain rates of 0.01–1 s−1. (iii) The description of the material constitutive model by means of the Arrhenius-type equation and the comparison between the experimental and predicted data. Firstly, the method was validated on USIBOR®1500 boron steel by means of a comparison with existing literature data, and good agreement with other scientific works was found. Finally, this method was also adopted on USIBOR®2000, a steel that belongs to the new generation of Ultra-High-Strength Steels (UHSS). A comparison between the rheological behavior of these two steels was carried out. The results show that USIBOR®2000 steel exhibits greater strength compared to USIBOR®1500 steel. The Arrhenius constitutive model well predicts the flow behavior of both steels.
9 May 2024 in Journal of Materials Engineering and Performance
Car manufacturers increasingly aid high-strength aluminum alloys for their advantageous weight-to-strength ratio, but their limited formability poses challenges in plastic deformation processes. Tailored heat-treated blanks (THTBs) are a propitious approach to improve formability. Surface laser treatment is the predominant technology for obtaining THTB. To design this process quickly and accurately, without material waste, the use of physical simulation is increasingly promising. It allows replicating the process on a lab-scale and studying posttreatment mechanical and metallurgical properties. By adopting Gleeble® physical simulator, this study investigates the softening effects of local surface laser heat treatment on a EN AW 6082 T6 aluminum alloy blank. Two laser movement strategies—single linear path and multiple rectangular paths—were investigated at two treatment speeds for each. A finite element (FE) model was developed for simulating the process under all explored conditions. FE-derived thermal cycles were reproduced by means of physical simulation. After physical tests, alloy mechanical properties were evaluated. Results show that these properties depend on both the peak temperature thermal cycle and the interaction time between the laser source and the material surface. The comparison between the two strategies revealed that the multiple rectangular paths strategy allows to achieve a wider softened area at comparable interaction times.