A detailed review of recent developments of layer-by-layer (LbL) deposition as a promising approach to reduce flammability of the most widely used fibers (cotton, polyester, polyamide and their blends) is presented. LbL deposition is an emerging green technology, showing numerous advantages over current commercially available finishing processes due to the use of water as a solvent for a variety of active substances. For flame-retardant (FR) purposes, different ingredients are able to build oppositely charged layers at very low concentrations in water (e.g., small organic molecules and macromolecules from renewable sources, inorganic compounds, metallic or oxide colloids, etc.). Since the layers on a textile substrate are bonded with pH and ion-sensitive electrostatic forces, the greatest technological drawback of LbL deposition for FR finishing is its non-resistance to washing cycles. Several possibilities of laundering durability improvements by different pre-treatments, as well as post-treatments to form covalent bonds between the layers, are presented in this review.
Environmentally benign layer-by-layer (LbL) deposition was used to obtain flame-retardant and antimicrobial cotton. Cotton was coated with 8, 10, and 12 phytic acid (PA) and chitosan (CH)-urea bilayers (BL) and then immersed into copper (II) sulfate (CuSO4) solution. Our findings were that 12 BL of PA/CH-urea + Cu2+ were able to stop flame on cotton during vertical flammability testing (VFT) with a limiting oxygen index (LOI) value of 26%. Microscale combustion calorimeter (MCC) data showed a reduction of peak heat release rates (pHRR) of more than 61%, while the reduction of total heat release (THR) was more than 54%, relative to untreated cotton. TG-IR analysis of 12 BL-treated cotton showed the release of water, methane, carbon dioxide, carbon monoxide, and aldehydes, while by adding Cu2+ ions, the treated cotton produces a lower amount of methane. Treated cotton also showed no levoglucosan. The intumescent behavior of the treatment was indicated by the bubbled structure of the post-burn char. Antibacterial testing showed a 100% reduction of Klebsiella pneumoniae and Staphylococcus aureus. In this study, cotton was successfully functionalized with a multifunctional ecologically benign flame-retardant and antibacterial nanocoating, by means of LbL deposition.
The microencapsulation of the cannabidiol and its integration into the tampon can eliminate vaginal inflammation, which at the same time lead to relaxation of the abdominal muscles. The tampon, which contains the active substance cannabidiol (CBD), was developed as an advanced fibrous composite for sanitary application. The active substances were microencapsulated, and, as a carrier, liposomes micro/nano capsules were used. The CBD liposome formulation was analyzed by particle size, polydispersity index, zeta potential, and encapsulation efficiency. Particle size of the CBD liposome liquid formulation was increased by 19%, compared to the liposome liquid formulation and the encapsulation efficiency of CBD in liposome particles, which was 90%. The CBD liposome formulation was applied to cellulose material. The composition of the fibrous composite material was evaluated by Fourier transform infrared spectroscopy, the fiber morphology was analyzed by scanning electron spectroscopy, while the bioactive properties were assessed by antioxidant efficiency, antimicrobial properties, and desorption kinetics. CBD liposome functionalized tampons have both antioxidant and antimicrobial properties. Antimicrobial properties were more pronounced against Gram-positive bacteria. The desorption kinetics of the CBD liposome immobilized on the surface of the composite material was studied using antioxidant activity in the desorption bath. The prepared CBD liposome functionalized tampon additionally shows higher biodegradability compared to references. This high-quality, biodegradable sanitary material based on microencapsulated CBD components as a functional coating provides a platform for many different applications besides medical textiles, also for packaging, pharmaceuticals, paper and wood-based materials, etc.
7 December 2018 in IOP Conference Series: Materials Science and Engineering
Release of formaldehyde from durable press-treated fabrics is a problem for human health and safety because formaldehyde is suspected to be carcinogenic. The accuracy of the standard test method for the free formaldehyde determination, Japan Law 112, depends on the formaldehyde content of the sample. The detection of low formaldehyde contents is particularly important in fields, like children clothing, so the application of high-performance liquid chromatography was evaluated. The results obtained by the standard test method, Japan Law 112, where UV/Vis spectrometer was used, were compared with the results obtained by HPLC method in which separation was performed on an RP C18 column with water–methanol as a mobile phase. It was shown that the detection limit and limit of quantification were improved using the HPLC method.