The prediction of the ultimate bending capacity of the rectangular concrete-filled steel tube (RCFST) beams strengthened with U-shaped carbon fiber reinforced polymer (CFRP) sheets is limited to using the existing empirical models. Thus, this study aims to develop a new theoretical model based on a stress block model to predict the ultimate bending capacity (Mu) of the RCFST beams strengthened with a U-shaped CFRP-wrapping scheme. For this purpose, 28 finite element (FE) models of CFRP-strengthened RCFST beams had been analyzed for further investigation of the flexural behavior and longitudinal stresses distributed along with the beam’s components (steel tube, concrete core, and CFRP layers). The main parameters investigated are concrete compressive strength, steel yield strength, number of CFRP layers, and CFRP-wrapping-depth ratio. In addition, the Mu values obtained from the FE models of the current study and those from the existing experimental tests performed by others are used to verify the corresponding values that are theoretically predicted by the new model. The comparison showed that the proposed model is moderately conservative, as the predicted values of Mu are, on average, up to 10% lower than those obtained from experimental tests and FE analysis.
In analysis of different types of dams, i.e. arch, gravity, rockfill and Roller Compacted Concrete (RCC) dams, the effect of hydrodynamic water pressure as an effective factor must seriously be taken into consideration. In present study, the hydrodynamic effect is precisely deliberated in RCC dams and compared to hydrostatic pressure effect. For this purpose, Kinta RCC dam in Malaysia is selected and 2D finite element (FE) model of the dam is performed. The Lagrangian approach is used to solve the dam-reservoir interaction, fluid–structure interaction (FSI), and in order to evaluate the crack pattern, Concrete Damaged Plasticity (CDP) model is implemented. Comparisons show that hydrodynamic pressure significantly changes the dam behaviour under seismic excitations. Moreover, the hydrodynamic effect modifies the deformation shape of the dam during the ground motions, however, it increases the magnitudes of the developed stresses causing more extensive tension crack damages mostly in the heel and upstream zones of the dam.