EMAD HOSSEINPOUR

Dr. EMAD HOSSEINPOUR

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Ahmed W. Al ZandAhmed W. Al Zand
Ahmed W. Al Zand
Mustafa M.AliMustafa M.Ali
Mustafa M.Ali
Riyadh Al-AmeriRiyadh Al-Ameri
Riyadh Al-Ameri
WBWan Hamidon Wan Badaruzzaman
Wan Hamidon Wan Badaruzzaman
WTWadhah M. Tawfeeq
Wadhah M. Tawfeeq
ZYZaher Mundher Yaseen
Zaher Mundher Yaseen
The flexural strength of Slender steel tube sections is known to achieve significant improvements upon being filled with concrete material; however, this section is more likely to fail due to buckling under compression stresses. This study investigates the flexural behavior of a Slender steel tube beam that was produced by connecting two pieces of C-sections and was filled with recycled-aggregate concrete materials (CFST beam). The C-section’s lips behaved as internal stiffeners for the CFST beam’s cross-section. A static flexural test was conducted on five large scale specimens, including one specimen that was tested without concrete material (hollow specimen). The ABAQUS software was also employed for the simulation and non-linear analysis of an additional 20 CFST models in order to further investigate the effects of varied parameters that were not tested experimentally. The numerical model was able to adequately verify the flexural behavior and failure mode of the corresponding tested specimen, with an overestimation of the flexural strength capacity of about 3.1%. Generally, the study confirmed the validity of using the tubular C-sections in the CFST beam concept, and their lips (internal stiffeners) led to significant improvements in the flexural strength, stiffness, and energy absorption index. Moreover, a new analytical method was developed to specifically predict the bending (flexural) strength capacity of the internally stiffened CFST beams with steel stiffeners, which was well-aligned with the results derived from the current investigation and with those obtained by others.

15 March 2024 in Tunnelling and Underground Space Technology
Verified
Journal Article
Open access
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros
Hugo CostelhaHugo Costelha
Hugo Costelha
DBDavid Bento
David Bento
NBNelson Brites
Nelson Brites
RLRui Luís
Rui Luís
BEBriar Esmail
Briar Esmail
This paper describes the relevant research activities that are being carried out on the development of a novel shotcrete technology capable of applying, autonomously and in real time, fibre reinforced shotcrete (FRS) with tailored properties regarding the optimum structural strengthening of railway tunnels (RT). This technique allows to apply fibre reinforced concrete (FRC) of strain softening (SSFRC) and strain hardening (SHFRC) according to a multi-level advanced numerical simulation that considers the relevant nonlinear features of these FRC, as well as their interaction with the surrounding soil, for an intended strengthening performance of the RT. Building information modelling (BIM) is used for assisting on the development of data files of the involved design software, integrating geometric assessment of a RT, damages from inspection and diagnosis, and the characteristics of the FRS strengthening solution. A dedicated computational tool was developed to design FRC with target properties. The preliminary experimental results on the evaluation of the relevant mechanical properties of the FRS are presented and discussed, as well as the experimental tests on the bond between FRS and current substrates found in RT. Representative numerical simulations were performed to demonstrate the structural performance of the proposed FRS-based strengthening technique. Computational tools capable of assuring, in real time, the aimed thickness of the layers forming the FRS strengthening shell were also developed. The first generation of a mechanical device for controlling the amount of fibres to be added, in real time, to the FRS mixture was conceived, built and tested. A mechanism is also being developed to improve the fibre distribution during its introduction through the mechanical device to avoid fibre balling. This work describes the relevant achievements already attained, as introduces the planned future initiatives in the scope of this project.

1 June 2021 in Engineering Science and Technology, an International Journal
Verified
Journal Article
Open access
MAM. Ansari
M. Ansari
MJM.Z Jeddi
M.Z Jeddi
WBW.H.W. Badaruzzaman
W.H.W. Badaruzzaman
MTM.M. Tahir
M.M. Tahir
SOS.A. Osman
S.A. Osman
EHEMAD HOSSEINPOUR
EMAD HOSSEINPOUR

2 August 2022 in Journal of Engineering
Verified
Journal Article
Open access
PDF file
MMMohamed S. Majdub
Mohamed S. Majdub
SBS. Baharom
S. Baharom
Ahmed W. Al ZandAhmed W. Al Zand
Ahmed W. Al Zand
AMAzrul A. Mutalib
Azrul A. Mutalib
EHEMAD HOSSEINPOUR
EMAD HOSSEINPOUR
Composite slim floor systems are increasingly applied in the construction industry. Therefore, several experimental and numerical studies have been conducted to investigate the composite flooring systems and examine the various details that may affect the production of composite floors. This review paper summarises some important developments of composite slim floor beams, such as the type of steel beam cross section and shear connectors used, presenting essential results and important notes from various studies. The fundamental structural elements and the contribution of conducted studies towards improving the shear capacity of composite beams in enhancing the general structural behaviour were also described. Finally, the paper concludes with the potential of a deeper investigation of some issues that accompany the application of certain types of shear connects or steel shapes used to improve the composite slim floor system so that the improvement construction industry may make the most out of using composite construction techniques.

14 November 2012
Verified
Conference Paper
Closed access
NAN. Amani
N. Amani
EHEMAD HOSSEINPOUR
EMAD HOSSEINPOUR
Recent requirements in component management of building systems have focused on the need for improving methods and metric tools to support component condition assessment and appropriate decisions for infrastructure owned facilities. A range of research articles (1975-2009) covering infrastructure system of component condition assessment systems (CCAS) is discussed to provide a practical and theoretical overview of CCAS infrastructure systems in industry and research. This paper reviews much of the literature on CCAS infrastructure systems. The literature is collected from major books, journals, technical reports and conference proceedings, the period covered is from 1975 to 2009. This paper finds that the focus of CCAS, surveyed in several aspects during the 35 years that have been investigated, from technology to measurement and from assessment function to component maintenance as an integrated part of the infrastructure component management. The purpose of this paper is to provide an overview of CCAS infrastructure system in industry and research. This paper offers help to researchers in understanding the selection of suitable method for component condition assessment in infrastructure systems.

24 March 2025 in Infrastructures
Verified
Journal Article
Open access
PDF file
Mohammad AnsariMohammad Ansari
Mohammad Ansari
Ahmed W. Al ZandAhmed W. Al Zand
Ahmed W. Al Zand
EHEMAD HOSSEINPOUR
EMAD HOSSEINPOUR
AJAli Joharchi
Ali Joharchi
Masoud AbediniMasoud Abedini
Masoud Abedini
The prediction of the ultimate bending capacity of the rectangular concrete-filled steel tube (RCFST) beams strengthened with U-shaped carbon fiber reinforced polymer (CFRP) sheets is limited to using the existing empirical models. Thus, this study aims to develop a new theoretical model based on a stress block model to predict the ultimate bending capacity (Mu) of the RCFST beams strengthened with a U-shaped CFRP-wrapping scheme. For this purpose, 28 finite element (FE) models of CFRP-strengthened RCFST beams had been analyzed for further investigation of the flexural behavior and longitudinal stresses distributed along with the beam’s components (steel tube, concrete core, and CFRP layers). The main parameters investigated are concrete compressive strength, steel yield strength, number of CFRP layers, and CFRP-wrapping-depth ratio. In addition, the Mu values obtained from the FE models of the current study and those from the existing experimental tests performed by others are used to verify the corresponding values that are theoretically predicted by the new model. The comparison showed that the proposed model is moderately conservative, as the predicted values of Mu are, on average, up to 10% lower than those obtained from experimental tests and FE analysis.