This work explores the technical possibilities of increasing the efficiency of a standard solar chimney power plant (SCPP) by integrating it with photovoltaic (PV) panels. The integration is possible by using the collector circumference to install the PV collectors, which provide a heat sink, allow for the better harvesting of the solar radiation, and increase energy production. The new design led to an increase in the annual electricity production from 380 to 494 MWh and water production from 278 to 326 k tons/year compared with the standard SCPP, marking an increase of 30% and 17%, respectively. The results also show that the integration reduced the greenhouse gas emissions (GHG), the localized cost of energy, and the capital cost of investment by 30%, 36%, and 20%, respectively. The proposed design supports the sustainable replacement of the existing desalination plants with zero operational costs and an excellent reduction in greenhouse gas emissions.

This work presents a novel triple-renewable energy system (TRES) that is based on integrating the photovoltaic panels (PVPs), conventional solar chimney (CSC), and cooling tower (CT) in one structure. The ultimate objective of the proposed TRES system is to produce electrical power (P_elc), desalinated water (D_w), and if required cooling utilities. The components of the system include a chimney tower, collector, base, PVPs, water pool, bi-directional turbine, and water sprinklers. The TRES system can be operated as CSC during the daytime and CT at night providing 24-h operation. The PVPs were integrated within the structure to increase the P_elc production and enhance the process performance by heating the air inside the system. The TRES structure increased the efficiency to 0.860% in comparison with the CSC (0.313%). The annual P_elc production from the TRES system was found to be 792 MWh compared with only 380 MWh generated by the CSC achieving 2.1 folds overall improvement. The CSC-PV and CT contributed to 47% (494 MWh) and 24% (253 MWh) of the P_elc production, respectively. The annual D_w production was found to be 1.2-fold higher (163,142 tons) higher than the CSC (139,443 tons). The newly developed TRES system offers a great potential to produce P_elc and D_w and save fossil fuel consumption while reducing the emissions of greenhouse gasses (GHGs) to the atmosphere.

Overheating of photovoltaic (PV) panels decreases their efficiency and lifetime, and subsequently increases the levelized cost of energy (LCOE). Passive PV cooling would enhance the PV operational stability and durability. The cooling tower (CT) technology offers an attractive approach for zero-cost capability. In this work, we developed and customized a CT specific for passive PV cooling. Since the dense downdrafted cooled air gained high velocity, a turbine was installed at the bottom of the CT for power production. At the height’s ambient temperature, the CT cooled the air from 50 °C down to 30 °C. The cooled air at 30 °C has enough capacity to cool the PV panels. This cooling capacity improved the average annual efficiency of the PV panels by 6.83%. The design specifications of the CT have the highest performance, with the maximum radius of PV area of panels that can be cooled at 50 m. Furthermore, the current design could operate during the night for power production with minimum operational cost.