Yun Ha Yoo

Dr. Yun Ha Yoo


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
Sangwon ChoSangwon Cho
Sangwon Cho
GKGeon-Il Kim
Geon-Il Kim
SKSang-Jin Ko
Sang-Jin Ko
JYJin-Seok Yoo
Jin-Seok Yoo
YJYeon-Seung Jung
Yeon-Seung Jung
JKJung-Gu Kim
Jung-Gu Kim
This study investigated the hydrogen embrittlement (HE) characteristics of advanced high-strength steels (AHSSs). Two different types of AHSSs with a tensile strength of 1.2 GPa were investigated. Slow strain rate tests (SSRTs) were performed under various applied potentials (Eapp) to identify the mechanism with the greatest effect on the embrittlement of the specimens. The SSRT results revealed that, as the Eapp increased, the elongation tended to increase, even when a potential exceeding the corrosion potential was applied. Both types of AHSSs exhibited embrittled fracture behavior that was dominated by HE. The fractured SSRT specimens were subjected to a thermal desorption spectroscopy analysis, revealing that diffusible hydrogen was trapped mainly at the grain boundaries and dislocations (i.e., reversible hydrogen-trapping sites). The micro-analysis results revealed that the poor HE resistance of the specimens was attributed to the more reversible hydrogen-trapping sites.

16 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
KKKyung-Min Kim
Kyung-Min Kim
GKGeon-Il Kim
Geon-Il Kim
GSGyeong-Ho Son
Gyeong-Ho Son
YYYun Ha Yoo
Yun Ha Yoo
SHSujik Hong
Sujik Hong
JKJung-Gu Kim
Jung-Gu Kim
The automobile industry commonly uses cyclic corrosion tests (CCTs) to evaluate the durability of materials. However, the extended evaluation period required by CCTs can pose challenges in this fast-paced industry. To address this issue, a new approach that combines a CCT with an electrochemically accelerated corrosion test has been explored, to shorten the evaluation period. This method involves the formation of a corrosion product layer through a CCT, which leads to localized corrosion, followed by applying an electrochemically accelerated corrosion test using an agar gel electrolyte to preserve the corrosion product layer as much as possible. The results indicate that this approach can achieve comparable localized corrosion resistance, with similar localized corrosion area ratios and maximum localized corrosion depths to those obtained through a conventional CCT in half the time.

5 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
SCSangwon Cho
Sangwon Cho
SKSang-Jin Ko
Sang-Jin Ko
JYJin-Seok Yoo
Jin-Seok Yoo
JPJoong-Chul Park
Joong-Chul Park
YYYun Ha Yoo
Yun Ha Yoo
JKJung-Gu Kim
Jung-Gu Kim
This study investigated the optimum pickling conditions for improving the phosphatability of advanced high-strength steel (AHSS) using surface analysis and electrochemical measurements. To remove the SiO2 that forms on the surface of AHSS, 30 wt.% NH4HF2 was added to the pickling solution, resulting in a significant reduction in the amount of SiO2 remaining on the surface of the AHSS. The phosphatability was improved remarkably using HNO3 concentrations higher than 13% in the pickling solution. Furthermore, phosphate crystals became finer after pickling with a HNO3-based solution rather than a HCl-based solution. Electrochemical impedance spectroscopy (EIS) data indicated that the corrosion resistance of AHSS subjected to HNO3-based pickling was higher than that of AHSS subjected to HCl-based pickling. Fluorine compounds, which were involved in the phosphate treatment process, were only formed on the surface of steel in HNO3-based solutions. The F compounds reacted with the phosphate solution to increase the pH of the bulk solution, which greatly improved the phosphatability. The phosphatability was better under HNO3-based conditions than a HCl-based condition due to the fineness of the phosphate structure and the increased surface roughness.

1 March 2018 in Transaction of the Korean Society of Automotive Engineers
Verified
Journal Article
Open access
SYSuk-Jong Yoo
Suk-Jong Yoo
YYYun Ha Yoo
Yun Ha Yoo