Carbon-based nanomaterials (CBN) are currently used in many biomedical applications. The research includes optimization of single grain size and conglomerates of pure detonated nanodiamond (DND), modified nanodiamond particles and graphene oxide (GO) in order to compare their bactericidal activity against food pathogens. Measurement of grain size and zeta potential was performed using the Dynamic Light Scattering (DLS) method. Surface morphology was evaluated using a Scanning Electron Microscope (SEM) and confocal microscope. X-ray diffraction (XRD) was performed in order to confirm the crystallographic structure of detonation nanodiamond particles. Bacteriostatic tests were performed by evaluating the inhibition zone of pathogens in the presence of carbon based nanomaterials. Raman spectroscopy showed differences between the content of the diamond and graphite phases in diamond nanoparticles. Fluorescence microscopy and adenosine-5′-triphosphate (ATP) determination methods were used to assess the bactericidal of bioactive polymers obtained by modification of food wrapping film using various carbon-based nanomaterials. The results indicate differences in the sizes of individual grains and conglomerates of carbon nanomaterials within the same carbon allotropes depending on surface modification. The bactericidal properties depend on the allotropic form of carbon and the type of surface modification. Depending on the grain size of carbon-based materials, surface modification, the content of the diamond and graphite phases, surface of carbon-based nanomaterials film formation shows more or less intense bactericidal properties and differentiated adhesion of bacterial biofilms to food films modified with carbon nanostructures.
Microbial fuel cells (MFCs) represent simple devices that harness the metabolic activities of microorganisms to produce electrical energy from diverse sources such as organic waste and sustainable biomass.
The DLC coating of samples produced by additive manufacturing with complex shapes is a challenge but also shows the possibility of obtaining a diffusive barrier for biomedical applications. In this study, stochastic porous structures based on Voronoi tessellation were fabricated using binder jetting technology from 316L SS powder and modified using DLC coating. The DLC coating was deposited using the RF PACVD technology. The chamber pressure was 40 Pa with a methane gas flow rate of 60 sccm. The negative bias voltage was 700 V. The deposition time was 5 min. Dimensional analysis was performed using optical microscopy. Surface morphology and topography were evaluated using SEM and confocal microscopy. Raman spectroscopy was used to examine the chemical structure of DLC coating. Finally, the HR TEM was used to evaluate the physicochemical characterization of the DLC coating. The interconnected complex spatial network of the Voronoi structure was accurately duplicated by the binder jetting technology. The obtained substrates were characterized by high roughness (Ra = 6.43 µm). Moreover, the results indicated that the conditions of the RF PACVD process allow for the deposition of the continuous and tightened DLC coating with a thickness from 30 nm to 230 nm and defined the content of Cr2O3 and SiO2.
Productivity growth in the machining industry is associated with a reduction in the cost of cleaning and recycling contaminated process fluids. The proper use of process fluids or lubricants can bring a significant reduction in friction and th...
1 February 2021 in Environmental Technology & Innovation