Architectural Technologies, University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, Banja Luka, Bosnia and Herzegovina, Banja Luka, Srpska, Republika, Bosnia and Herzegovina
Prof. Dr. Darija Gajić
Architectural Technologies, University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, Banja Luka, Bosnia and Herzegovina, Banja Luka, Srpska, Republika, Bosnia and Herzegovina
Sustainable approaches for retrofitting buildings for energy efficiency are becoming necessary in a time when the building sector is the largest energy consumer. Retrofitting building stock is effective for reducing global energy consumption and decreasing resource exploitation. Less developed EU member states and neighboring developing countries show reluctance towards healthy and renewable materials. Implementation of sustainable materials for energy retrofitting is slowed down due to gaps in legislation and effective strategic programs, availability of bio-based materials, lack of knowledge regarding use and maintenance of renewable products, and marketing lobbies. Use of bio-based materials in refurbishment is important due to their negative or low global warming potential (GWP), low primary energy (PEI) need for production, cost-effective benefits, and recycling/reuse potential. Role of environmentally friendly solutions and low-carbon economy growth is particularly relevant in developing countries, such as Bosnia-Herzegovina, that cannot afford innovative energy recovery systems, yet possess a significant amount of poorly managed building stock. This research aims to analyze frameworks regarding retrofitting of residential buildings in Bosnia-Herzegovina and Slovenia. The analysis tackles indirect causes, studies the legal background, and examines strategic frameworks; thus, it indicates potential barriers for implementation of recommended retrofitting solutions based on renewable materials.
The first experimental results of the indoor air quality in two kindergartens located in the Republic of Srpska are presented in this paper. Kindergarten representatives for the year of construction (old and new), building materials, and energy efficiency have been chosen. Indoor air quality measurements (air temperature, relative humidity, ventilation rate, CO2, and radon concentration) were performed during the winter of 2015/2016. Measured indoor air quality parameters are discussed and compared to the international standards BAS EN 16798-1, ASHRAE 62.1, and ISO 7730. The average measured radon concentrations for both buildings have not exceeded the level of 200 Bq/m3, but for reliable results, long-term measurement needs to be performed. The CO2 concentration in the old kindergarten fulfills the BAS EN 16798-1 requirement for Category I during 62.43% of total occupancy time, while for the new kindergarten, it is only 5.79% of full occupancy time. Results of CO2 concentration confirm that good sealing of the envelope of new buildings and user behavior (number of users and natural ventilation) does affect air quality. Furthermore, a high correlation between CO2 concentration and relative humidity in both buildings and a more considerable correlation for the new building have been observed.
Experimental methods are often only possible solution to determining heat transmission coefficient (U-value) of elements in existing buildings. These methods can be of great importance in developing countries which are tackling energy poverty by conducting deep energy retrofit of the existing building stock, such as in case of Bosnia and Herzegovina. The ISO 9869-1 standard recognizes heat-flow-meter (HFM) methodology as enough precise to give reliable results. However, this methodology predicts strict criteria under which measuring can be done, what is sometimes not possible. Other method standardized with ISO 9869-2 includes quantitative infra-red thermography (QIRT) which is much suitable to conduct in-situ, yet, for its non-contact properties it is not as reliable as previous one. This paper aims to show process of implementation of these methods and statistically compare them to theoretical method made according to ISO 6946. Compared to theoretical heat transmission coefficient of Utheor.=1.366 W/m2K, results showed deviations ranging from S = ?4.17% to S = +1.61% for HFM method, with mean value of Umean =1.39 W/m2K, and S = 5.38% for QIRT method, with mean value of Umean = 1.29 W/m2K. In this paper, a comparative overview is made to show importance and applicability of each method, their prerequisites and reliability in real context.
In the subject area, the term nZEB standard appears in 2011 in the legislative framework, but it never came to life, nor in the construction of new buildings, and completely unknown in the renovation of buildings. The reasons for this are insufficiently researched possibilities, i.e., unanalysed energy savings and economic profitability during the building renovation according to the valid regulations and the nZEB standard. This research analysed a specific type of building, a kindergarten, which must also respect the rules and does not have its own classification related to energy classes. Analysis has shown that, depending on the type of building, all possibilities for improving construction should be explored, not only in energy but also in redesign shape, since in this way, it is possible to reduce energy consumption to a minimum.
Yielding from an overall quantitative study of the residential sector of Bosnia and Herzegovina (B&H), this chapter concentrates on the ratio between single-family and collective housing, as well as on the urban-rural ratio of the single-family housing. Based on the data from the existing building stock (buildings built by 2014) and the statistical estimates, 23% of the buildings belong to the urban areas and 77% belong to the rural areas. The main goal was to study the correlation between the characteristics of the building envelope, the shape factor (A/V ratio) and the energy savings potential for the application of conventional measures of refurbishment of the building envelope of the single-family houses (type of buildings, which dominate in rural and urban areas). The chapter wraps up with recommendations for the adequate level of the energy performance indicator (energy need for heating) for the approved energy class for single-family houses located in the climate zone of the northern B&H.