The use of image processing for the detection and classification of defects has been a reality for some time in science and industry. New methods are continually being presented to improve every aspect of this process. However, these new approaches are applied to a small, private collection of images, which makes a real comparative study of these methods very difficult. The objective of this paper was to compile a public annotated benchmark, that is, an extensive set of images with and without defects, and make these public, to enable the direct comparison of detection and classification methods. Moreover, different methods are reviewed and one of these is applied to the set of images; the results of which are also presented in this paper.

The growing use of mobile nodes in manufacturing environments is increasing the Quality of Service (QoS) requirements of the communications infrastructures that support them, as is the case with Industrial Wireless Sensor Networks (IWSN). Managing networks using Software Defined Networks (SDN) addresses the challenge of handling multiple sources in a satisfactory manner. The global vision of the topology that the SDN controller has allows a logical segmentation of the network, through the allocation of dedicated resources for each information flow, thus ensuring independent service levels and complete isolation. Mobile nodes produce constant changes in topology, which lead to instability for routing protocols. Traditional routing solutions with protocols such as Routing Protocol for Low-Power and Lossy Networks (RPL) require additional time to make the parent node change. This paper proposes Mobile Multicast Forwarding with Software Defined Network (MMF-SDN), an approach using Software Defined Networking solution for WIreless SEnsor Network (SDN WISE) protocol that exploits the advantages of SDN and Time Slotted Channel Hopping (TSCH) synchronism. The mobile nodes are managed as multicast sources, through a cumulative allocation of resources from the controller. This allows reception states to be synchronized at the parent nodes to provide network stability, avoiding subsequent recalculations in the routing protocol. Parent node changes are transparent and immediate. This proposal improves on other SDN based solutions, reducing energy consumption in reception by up to 50%, 70% end-to-end delay and improving scalability with a 30% reduction in slotframe occupancy.

IWSNs (Industrial Wireless Sensor Networks) have become the next step in the evolution of WSN (Wireless Sensor Networks) due to the nature and demands of modern industry. With this type of network, flexible and scalable architectures can be created that simultaneously support traffic sources with different characteristics. Due to the great diversity of application scenarios, there is a need to implement additional capabilities that can guarantee an adequate level of reliability and that can adapt to the dynamic behavior of the applications in use. The use of SDNs (Software Defined Networks) extends the possibilities of control over the network and enables its deployment at an industrial level. The signaling traffic exchanged between nodes and controller is heavy and must occupy the same channel as the data traffic. This difficulty can be overcome with the segmentation of the traffic into flows, and correct scheduling at the MAC (Medium Access Control) level, known as slices. This article proposes the integration in the SDN controller of a traffic manager, a routing process in charge of assigning different routes according to the different flows, as well as the introduction of the Time Slotted Channel Hopping (TSCH) Scheduler. In addition, the TSCH (Time Slotted Channel Hopping) is incorporated in the SDN-WISE framework (Software Defined Networking solution for Wireless Sensor Networks), and this protocol has been modified to send the TSCH schedule. These elements are jointly responsible for scheduling and segmenting the traffic that will be sent to the nodes through a single packet from the controller and its performance has been evaluated through simulation and a testbed. The results obtained show how flexibility, adaptability, and determinism increase thanks to the joint use of the routing process and the TSCH Scheduler, which makes it possible to create a slicing by flows, which have different quality of service requirements. This in turn helps guarantee their QoS characteristics, increase the PDR (Packet Delivery Ratio) for the flow with the highest priority, maintain the DMR (Deadline Miss Ratio), and increase the network lifetime.

The advent of Industry 4.0 brought about digitalisation and the integration of advanced technologies into industrial processes, with wireless networks emerging as a key enabler in the interconnection of smart devices, cyber–physical systems, and data analytics platforms. With the development of Industry 5.0 and its emphasis on human–machine collaboration, Wi-Fi has positioned itself as a viable alternative for industrial wireless connectivity, supporting seamless communication between robots, automation systems, and human operators. However, its adoption in critical applications remains limited due to persistent concerns over latency, reliability, and interference in shared-spectrum environments. This study evaluates the practical performance of Wi-Fi standards from 802.11n (Wi-Fi 4) to 802.11be (Wi-Fi 7) across three representative environments: residential, laboratory, and industrial. Six configurations were tested under consistent conditions, covering various frequency bands, channel widths, and traffic types. Results prove that Wi-Fi 6/6E delivers the best overall performance, particularly in low-interference 6 GHz scenarios. Wi-Fi 5 performs well in medium-range settings but is more sensitive to congestion, while Wi-Fi 4 consistently underperforms. Early Wi-Fi 7 hardware does not yet surpass Wi-Fi 6/6E consistently, reflecting its ongoing development. Despite these variations, the progression observed across generations clearly demonstrates incremental gains in throughput stability and latency control. While these improvements already provide tangible benefits for many industrial communication scenarios, the most significant leap in industrial applicability is expected to come from the effective implementation of high-efficiency mechanisms. These include OFDMA, TWT, scheduled uplink access, and enhanced QoS features. These capabilities, already embedded in the Wi-Fi 6 and 7 standards, represent the necessary foundation to move beyond conventional best-effort connectivity and toward supporting critical, latency-sensitive industrial applications.

Today, a wide range of developments and paradigms require the use of embedded systems characterized by restrictions on their computing capacity, consumption, cost, and network connection. The evolution of the Internet of Things (IoT) towards Industrial IoT (IIoT) or the Internet of Multimedia Things (IoMT), its impact within the 4.0 industry, the evolution of cloud computing towards edge or fog computing, also called near-sensor computing, or the increase in the use of embedded vision, are current examples of this trend. One of the most common methods of reducing energy consumption is the use of processor frequency scaling, based on a particular policy. The algorithms to define this policy are intended to obtain good responses to the workloads that occur in smarthphones. There has been no study that allows a correct definition of these algorithms for workloads such as those expected in the above scenarios. This paper presents a method to determine the operating parameters of the dynamic governor algorithm called Interactive, which offers significant improvements in power consumption, without reducing the performance of the application. These improvements depend on the load that the system has to support, so the results are evaluated against three different loads, from higher to lower, showing improvements ranging from 62% to 26%.