agung nugroho

Mr. agung nugroho

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
Nazaruddin SinagaNazaruddin Sinaga
Nazaruddin Sinaga
BYB Yunianto
B Yunianto
DPD Purba
D Purba
SYSyaiful
Syaiful
ANagung nugroho
agung nugroho
The role of data acquisition based measurement system in the researches is essential since it delivers many advantages compared to the manual arrangement. Nevertheless, its cost is comparatively high, then it becomes an obstacle, particularly for researchers in producing nations. The purpose of the study was to obtain a low-cost data acquisition system which has good performance when used in the research of dual-fuel engines. The study included a selection of variables, components and sensors, programming, and calibration. The Arduino based data acquisition system was chosen, which was relatively cheap and easy programming. The sensors/transducers consisted of three K-type thermocouples, three load cells, one proximity sensor, and one DHT-11 sensor. Programming of data acquisition systems was facilitated by using Arduino IDE software. The display and data recording were done in Microsoft Excel software, with the help of PLX-DAQ software. In this study, a low-cost data acquisition based measurement system had been successfully developed, which had low uncertainty, low hysteresis, and excellent repeatability. It is concluded that the system is very suitable to be used in dual fuel engine researches to measure engine speed, fuel discharge, gas fraction, torque, power, brake specific fuel consumption and brake thermal efficiency.

10 November 2024 in BIS Energy and Engineering
Verified
Journal Article
Open access
PDF file
ANagung nugroho
agung nugroho
MFM A Fatwa
M A Fatwa
PHP D Hurip
P D Hurip
HMH Murtado
H Murtado
LKL Kurniasari
L Kurniasari
Plastic waste originating from fishing gear, composed of both polyethylene (PE) and polyamide (PA) materials, constitutes a pressing environmental concern. Addressing this issue, pyrolysis emerges as a transformative avenue, converting plastic waste into liquid fuel that can serve as an alternative energy resource. This research ventures into a comprehensive investigation of the physical properties intrinsic to plastic oil, encompassing pivotal attributes such as viscosity, density, cetane number, and calorific value. By delving into these properties, the study aims to shed light on the potential of plastic oil as a viable energy source and to understand its applicability within the realm of sustainable fuel alternatives. However, this study's scope extends beyond the elucidation of physicochemical intricacies. Beyond characterizing plastic oil, the research embarks on a holistic exploration encompassing engine performance when employing plastic oil in synergy with a 10% plastic oil and 90% biodiesel blend. This synthesis of fuel types becomes a pivotal aspect of the study's inquisition, culminating in the assessment of engine torque, power output, and Specific Fuel Consumption (SFC). The outcome of these engine tests unveils intriguing insights—peak torque emerged with a 10% PE plastic oil blend, registering at 18 NW, while the highest power output occurred with PE plastic oil, reaching 3.9 kW. Moreover, the dynamic interplay between plastic oil blends and engine efficiency is highlighted, as evidenced by the highest SFC value obtained with a 10% PA plastic oil blend, measuring 12.298 g/Kw.min. The ramifications of this study reverberate far beyond the confines of the laboratory, resonating with the dire need for sustainable energy solutions. By decoding the complex matrix of plastic oil properties and evaluating their seamless integration into combustion processes, this research contributes to the evolving narrative of sustainable energy utilization. As we grapple with the ramifications of plastic waste, this study offers a nuanced perspective that transcends mere material reclamation, propelling us towards an energy landscape that bridges ecological responsibility and pragmatic resource optimization.

21 September 2018
Verified
Conference Paper
Closed access
PDF file
ANagung nugroho
agung nugroho
Nazaruddin SinagaNazaruddin Sinaga
Nazaruddin Sinaga
IHIsmoyo Haryanto
Ismoyo Haryanto
The needs of energy in Indonesia show significant increase every year especially are non-renewable energy. Fossil fuel are non-renewable energy resources that usually used in the combustion engine. The limited resource of fossil fuels means reducing fuels consumption has been vital in case of engine development. There are two type of combustion engine that widely used i.e. compress ignition and spark ignition engine. Compress ignition engine usually has better thermal efficiency than spark ignition engine. Compress ignition engine usually used diesel fuel which are fossil fuel as primary fuel. Dual fuel method has been used to improve fuel consumption in diesel engine. Dual fuel has advantages in better thermal efficiency, power, and CO emission. In this research, dual fuel is used in C223 diesel engine with Liquid Petroleum Gas (LPG) as secondary fuels. Dual fuel mode is tested by varying LPG concentration at 35%, 45%, and 75% with various speed at 1500,1800,2100, and 2700 rpm. Engine performance such as fuel consumption, thermal efficiency, and power are being investigated. The results show that brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and power with dual fuel engine better than single fuel (diesel only). The improvement of BTE are appear with LPG 45% concentration or denoted as G45.

2 December 2017 in Reaktor
Verified
Journal Article
Open access
PDF file
ASAdhi Setiawan
Adhi Setiawan
NNNora Amelia Novitrie
Nora Amelia Novitrie
ANagung nugroho
agung nugroho
WWW Widiyastuti
W Widiyastuti
Corrosion Characteristics of Carbon Steel upon Exposure to Biodiesel Synthesized from Used Frying Oil

29 March 2024 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
SRSri Mulyo Bondan Respati
Sri Mulyo Bondan Respati
ANagung nugroho
agung nugroho
IIIlham Iskandar
Ilham Iskandar
MMMochamad Subchan Mauludin
Mochamad Subchan Mauludin
The battery component with the most important role is the separator. The separator is used as a battery cell to store a source of electricity and separate the cathode and anode. The separator in a battery is often damaged because its material is easily crushed or broken. This study aimed to create a new separator cell using a porous ceramic made from a mixture of zeolite sand and corn flour. This porous ceramic as a battery separator is sought to increase the ionic conductivity and thermal stability of the battery. The ceramic is divided into 4 grain size variables, namely grain size using 100, 30, and 16 mesh sieves—and grain size without using a sieve, or coarse grain. The making process begins with zeolite sand sifting. The sifted zeolite is then mixed with corn flour. The composition of the mixing is 92% zeolite and 8% corn flour. Then green ceramics molding are carried out at a pressure of 15 MPa. Then sintering is carried out in the furnace for 4 hours at a temperature of 900°C. The resulting porous ceramics are assembled onto batteries. The finished batteries are then tested for mains voltage. The porous ceramics are micro-photo tested. The results of the stress test show that the 100 mesh sieve zeolite variation has a voltage of 3.97 volts, the 30 mesh sieve zeolite variation has a voltage of 3.72 volts, and the 16 mesh sieve zeolite variation has a voltage of 3.43 volts. Whereas the zeolite variation without using a sieve cannot be molded because it is easily crushed so testing is impossible. Furthermore, the results of the micro-photo test show that for the 100 mesh sieve zeolite variation, the pores are relatively tight; for the 30 mesh sieve zeolite variation, there are several more pores when compared to the 100 mesh sieve; and for the 16 mesh sieve zeolite variation, the most (largest) pores among the three grain size variables are found

27 April 2020 in Jurnal Ilmiah Momentum
Verified
Journal Article
Open access
PDF file
ANagung nugroho
agung nugroho
IWIka Bayu Walujo
Ika Bayu Walujo
NSNazaruddin Sinaga
Nazaruddin Sinaga
Sistem dual fuel merupakan suatu sistem dengan menggunakan dua jenis bahan bakar yang memiliki karakteristik yang berbeda yaitu bahan bakar gas dan cair. Memanfaatkan perbedaan karakteristik bahan bakar ini maka performa dari mesin dapat ditingkatkan. Tujuan penelitian ini adalah untuk mengetahui fraksi LPG terbaik sebagai upaya untuk mengurangi konsumsi Bahan bakar minyak. Pada penelitian ini digunakan mesin diesel yang memiliki sistem konvensional, empat silinder dengan empat langkah (4-stroke). Bahan Bakar yang digunakan Dexlite dan LPG. Perbedaan fraksi Dexlite-LPG dibuat bervariasi G0, G30, G50 dan G70. Sistem indirect injection digunakan dalam penelitian ini, gas Liquid petroleum gas (LPG) diinjeksikan melalui intake manifold menggunakan konverter kit. Pengukuran daya dan torsi menggunakan dinamometer Water brake. Dalam penelitian ini digunakan mesin tipe C223 yang dimodifikasi menjadi mesin dual fuel dengan metode low pressure injected gas (LPIG). Dari penelitian yang dilakukan menunjukkan bahwa penggunaan sistem dual fuel Dexlite-LPG dapat meningkatkan torsi dan daya dibanding sistem single fuel. Daya meningkat 28 % terjadi saat dual fuel G70 torsi meningkat 24 % saat G30. BTE meningkat saat G50 dengan nilai 41% BSFC pada mode dual fuel turun dari 0.37 Kg/Kwh menjadi 0.29 Kg/Kwh saat G30. Kata kunci: Dexlite, dual fuel, LPG, kinerja mesin