The ingenious bridge, roof, and shell structures of the last century were designed from the understanding of the congenial interaction of the two materials concrete and steel. Nowadays, reinforced concrete is the most widely used material in construction. The use of system formwork and easy‐to‐install reinforcement support structures that are optimized in terms of labor costs, but often have inefficient use of material. In this context, Stefan Polónyi has repeatedly criticized the engineers' lost understanding of the interaction of concrete and reinforcement. With Additive Manufacturing, an innovative digital manufacturing technology is now available that allows new freedom in concrete design with a resource‐efficient use of materials at the same time. With regard to practical application, the integration of reinforcement represents a central challenge in 3D‐concrete‐printing. The authors see here the future chance of a force‐flow controlled reinforcement layout. The paper shows new strategies for the combined Additive Manufacturing of concrete and reinforcement and presents first 3D‐printed reinforced concrete elements.

Strengthening or retrofitting of existing structures is a more sustainable and resource-efficient solution than replacing them with new constructions. To enhance the performance and effectiveness of strengthening works the use of high-performance materials is a promising method. Using ultra-high performance fibre reinforced concrete (UHPFRC) as supplementary concrete is one of such solutions leading to high structural resistance and better durability. For such UHPFRC overlays the shear bond resistance of the interface between the existing substrate, usually normal strength concrete (NSC), and the UHPFRC is a significant design aspect. This paper presents the results of push-off tests conducted on NSC-UHPFRC specimens, which were produced with different substrate treatment methods. Using different surface measurement techniques including the sand patch method and digital microscopy, the effects of substrate roughness and treatment method on shear bond behaviour and failure mechanisms are investigated, and the results are analysed with design approaches and further calculation models in the technical literature. Based on the results, the significance of considering roughness parameters and failure mode for the design of high-performance overlays is highlighted. Furthermore, the effectiveness of different substrate treatment methods is discussed and an effective treatment method is suggested.