Despite the development of alternative energy sources, oil and gas still remain the predominant energy sources in most countries in the world. Due to gradual hydrocarbon reserve depletion and the existing downward trend in the production level, there is a need to search for methods and technical approaches to level off the falling rates. Chemically enhanced oil recovery methods (EOR) by surfactant solution injections are one of the possible approaches for addressing this issue in already developed fields. Most often, surfactants are injected together with polymers or alkalis. These technologies are called surfactant–polymer (SP) and alkali–surfactant–polymer (ASP) flooding. Basically, SP and ASP have been distributed in China and Canada. In this article, in addition to these countries, we paid attention to the results of pilot and full-scale tests of SP and ASP in Russia, Hungary, and Oman. This study was a comprehensive overview of laboratory and field tests of surfactant solutions used for oil displacement in SP and ASP technologies. The first part of the article discussed the physical fundamentals of the interaction of oil with surfactants. The second part presented the main chemical reagents used to increase oil recovery. In the third part, we described the main facilities used for the preparation and injection of surfactants. Further, the results of field tests of SP and ASP in the abovementioned countries were considered. In the discussion part, based on the considered results, the main issues and uncertainties were identified, based on which some recommendations were proposed for improving the process of preparation and injection of surfactants to increase oil recovery. In particular, we identified an area of additional laboratory and scientifically practical research. The outcomes of this work will provide a clearer picture of SP and ASP, as well as information about their limitations, current challenges, and potential paths forward for the development of these technologies from an economic and technological point of view.
The depletion of conventional oil reserves creates a significant demand for the development and improvement of methods and technologies for the production of hard-to-recover oil. A huge potential for hard-to-recover oil in Western Siberia lies in the Pokur suite (PK). These deposits are characterized by high oil viscosity and, accordingly, early water breakthrough. This study identifies and substantiates an effective technology for oil production from such and similar deposits using polymer flooding. The obtained data are based on research of the geological structure, the main reservoir properties and those of its fluids, chemical and laboratory methods of analysis, and the results of mathematical and hydrodynamic modeling. According to the results of hydrodynamic modeling, the greatest technological effect of polymeric water flooding is observed in the model of collector permeability at 70 mD and above 1000 mD, but this technology is not recommended for reservoirs with an average permeability of less than 10 mD. Implementation of the best practices through the prism of the resource nexus allows sustainable water management by applying environment-friendly polymers for enhanced oil recovery and contributes to the UN Goal 6 of clean water and sanitation.
A significant part of oil fields has reached a late stage of development, where technologies aimed at increasing the oil recovery factor are becoming particularly relevant. One such technology is surfactant–polymer flooding. To implement this technology, it is necessary to select a chemical formulation that retains its properties under reservoir conditions and enhances the efficiency of water flooding. This work presents a laboratory evaluation of various polymer and surfactant samples to develop an effective chemical formulation. The results demonstrate that anionic surfactants based on sodium laureth sulphate and betaine significantly reduce interfacial tension at the oil–water interface of the target reservoir. Furthermore, when combined with a partially hydrolysed polymer, the sodium laureth sulphate-based surfactant increases the capillary number by 4500 times (reducing interfacial tension from 32.77 mN/m to 0.065 mN/m and increasing the viscosity of the injected agent from 0.5 mPa·s to 4.36 mPa·s). Based on core flooding studies, it can be concluded that the proposed surfactant–polymer composition increases the oil displacement factor from the core sample by 0.15–0.24, depending on the injection volume. The selected formulation can be recommended for application in water flooding at the target reservoir.
1 January 2024 in International Journal of Engineering
This study details the enhancements to operational procedures aimed at intensifying the flow in producing horizontal wells within the oil field located in the eastern part of Pechora Sea. Situated on the Arctic shelf, this field is subject to severe weather and heavy ice conditions and is characterized by low-permeable, high-temperature carbonate reservoirs. Consequently, acid treatment is identified as the optimal method for flow stimulation. An acid composition (AC) tailored for carbonate reservoir rocks is proposed in this study. Laboratory evaluations of the AC have been conducted, resulted in the substantiation of the selected concentrations of acids and additive reagents. Dependencies of the rate and degree of dissolution of the carbonate material of the proposed AC with respect to time have been established. Additionally, it was determined how the AC’s stabilizing capacity for iron ions depends on the complexing agent concentration, and how interfacial tension at the boundary with the hydrocarbon phase varies with the surfactant type and concentration in the AC. The concentration of the corrosion inhibitor within the AC has also been determined. A methodology along with an illustrative calculation for estimating the volumes of primary acid components and additive reagents for the proposed AC under field conditions are presented. Moreover, to incorporate the results from laboratory physicochemical and filtration experiments of the AC, a methodology along with a calculation example is provided to estimate changes in the skin factor relative to the volume of acid composition injected per meter of horizontal well completion.
22 July 2025 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Актуальность. Из практики мировой нефтедобычи известно, что разработка месторождений нефти сопровождается уменьшением отбора нефти и увеличением обводненности продукции добывающих скважин. При этом на участке от нагнетательной скважины до реагирующих добывающих скважин в залежах с неоднородными породами-коллекторами может оставаться значительная нефтенасыщенная часть и нефтенасыщенные интервалы, не охваченные воздействием. Перспективным вариантом увеличения охвата продуктивных горизонтов воздействием, повышения коэффициента охвата и итоговой нефтеотдачи является применение потокоотклоняющих технологий. Цель. Обзор, оценка эффективности и перспектив использования сшитых полимерных композиций для повышения нефтеотдачи. Методы. Анализ существующих исследований и сравнительный анализ характеристик различных сшитых полимерных композиций, применяемых в нефтедобыче. Результаты и выводы. Проведён обзор по применению сшитых полимерных композиции для повышения нефтеотдачи. Делается вывод, что полимеры могут быть двух типов: синтетические полимеры и биополимеры. Один из самых распространённых синтетических полимеров – частично гидролизованный полиакриламид, а наиболее широко используемым биополимером является ксантановая камедь. Также было рассмотрено применение сшитых полимерных систем в промысловых условиях, основные принципы, механизмы действия и критерии применимости, учитывая основные геолого-физические условия пластов. Системы сшитых полимер классифицируются на три вида: коллоидно-дисперсные гели, предварительно сшитые гранулированные гели и полимеры внутрипластового гелирования. Отмечаются различные типы сшивателей полимеров, применяемые в каждом виде системы. На основании данного обзора исследователю можно будет определиться с выбором реагента для приготовления сшитых полимерных композиций, учитывая специфические требования и условия конкретного месторождения для оптимального подбора реагента.