Ralf Keimer

Mr. Ralf Keimer

orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SKSven Christian Künnecke
Sven Christian Künnecke
SVSrinivas Vasista
Srinivas Vasista
JRJohannes Riemenschneider
Johannes Riemenschneider
RKRalf Keimer
Ralf Keimer
MKMarkus Kintscher
Markus Kintscher
Drag reduction plays a major role in future aircraft design in order to lower emissions in aviation. In transonic flight, the transonic shock induces wave drag and thus increases the overall aircraft drag and hence emissions. In the past decades, shock control has been investigated intensively from an aerodynamic point of view and has proven its efficacy in terms of reducing wave drag. Furthermore, a number of concepts for shock control bumps (SCBs) that can adapt their position and height have been introduced. The implementation of adaptive SCBs requires a trade-off between aerodynamic benefits, system complexity and overall robustness. The challenge is to find a system with low complexity which still generates sufficient aerodynamic improvement to attain an overall system benefit. The objectives of this paper are to summarize adaptive concepts for shock control, and to evaluate and compare them in terms of their advantages and challenges of their system integrity so as to offer a basis for robust comparisons. The investigated concepts include different actuation systems as conventional spoiler actuators, shape memory alloys (SMAs) or pressurized elements. Near-term applications are seen for spoiler actuator concepts while highest controllability is identified for concepts several with smaller actuators such as SMAs.

1 September 2004 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
LCL. F. Campanile
L. F. Campanile
RKRalf Keimer
Ralf Keimer
EBE. J. Breitbach
E. J. Breitbach
The so-called “fish-mouth actuator”, developed at DLR in the framework of the Adaptive Wing project (ADIF), is a compact hybrid actuator based on the interaction of a shape memory material and a composite flexible mechanism. The actuator offers a high effective strain (ratio between actuator’s stroke and mounting dimension in the activation direction) and is therefore particularly interesting for the shape control of thin surfaces. In the ADIF project, the actuator development was focused on the realization of a wind-tunnel model for an adaptive wing with transonic bump. The actuator is designed and tested for a maximum stroke of 2 mm and a maximum force of 200 N. Its thickness (in activation direction) amounts to about 8 mm. If used with a feedback control system, it can reach a displacement precision of less than 1 mm. More than 400 single actuators were built and tested; 84 of them were integrated in the final system. In this paper, several design issues are discussed that are typical for such fully coupled hybrid systems. The design analysis and procedure used for the actuator development is described and a choice of experimental results is shown and discussed. The reported design philosophy and the related discussion include many concepts and solutions of general relevance which can be adopted for the development of similar hybrid actuators in the future.

2 October 2019 in Aerospace
Verified
Journal Article
Open access
PDF file
SVSrinivas Vasista
Srinivas Vasista
JRJohannes Riemenschneider
Johannes Riemenschneider
RKRalf Keimer
Ralf Keimer
HMHans Peter Monner
Hans Peter Monner
FNFelix Nolte
Felix Nolte
PHPeter Horst
Peter Horst
A design for a new high lift system that features a morphing wing leading edge “droop nose” has the potential to generate high lift coefficients whilst mitigating airframe noise emissions. This seamless, continuous, and stepless flexible droop nose potentially offers improvements to stall and compressor requirements for an internally-blown active Coandă trailing edge flap. A full-scale, span-trimmed three-dimensional droop nose was manufactured and ground-tested based on results obtained from new design synthesis tools. A new component of the droop nose is the hybrid fiberglass-elastomeric skin that is tailored in stiffness to meet morphing curvature requirements and spanwise bending resistance. A manufacturing concept of the novel skin was established that led to an adequate manufacturing quality. The skin was driven and supported by two optimized kinematic ribs and conventional actuators and overall shape results show good agreement apart from the region closest to the leading edge. Kinematic trajectory measurements showed that the kinematics met the target trajectories well, with and without the influence of the skin, and it was deemed that the error in curvature is due to a higher than expected skin stiffness in the hybrid layer. Calculated actuator torque levels and strain measurements corroborate this inference. The lessons learned show that means of adjustment post-assembly are needed, and a reduction of torque, energy and a better curvature distribution may be achieved if the skin at the spar junction is allowed to move relative to the main wing. Careful aerodynamic, structural, actuation and manufacturing trade-off studies would be needed to determine the overall performance benefit.

14 September 2005 in Proceedings of the 37th International Symposium on Automation and Robotics in Construction (isarc)
Verified
Conference Paper
Closed access
SAStephan Algermissen
Stephan Algermissen
RKRalf Keimer
Ralf Keimer
MRMichael Rose
Michael Rose
EBElmar Breitbach
Elmar Breitbach
HMHans Peter Monner
Hans Peter Monner
I.A.A.R.C. - International Association for Automation and Robotics in Construction Civil Engineering

1 September 2004 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
MRMichael Rose
Michael Rose
RKRalf Keimer
Ralf Keimer
EBE. J. Breitbach
E. J. Breitbach
LCL. F. Campanile
L. F. Campanile
Performance in high-speed mechanisms can be increased by means of a lightweight design. But, quite often, the resulting structures have the drawback of being susceptible to vibrations. This can be overcome by applying a smart-structures technology. In this work, an application to parallel mechanisms is presented, in which undesired vibrations are reduced by integrated piezoceramic (PZT) actuators and sensors, which are driven by a proper control system. As a basis for the development of suitable control laws, a proper simulation approach is to be used which is capable to model the mechanism’s dynamic behavior correctly, taking into account large motions. The multibody approach fulfills these requisites. The paper deals with the development of a fast C++-coded S-function in MATLAB/SIMULINK for a “five revolute joint” mechanism chosen as a test platform. This routine incorporates a multibody model with changing states. The flexibility of the bodies is taken into account in a modal form. The corresponding parameters are read from data files which can be generated by suitable preprocessors of proprietary multibody software packages like SIMPACK. The created model is compared with an equivalent SIMPACK-model and an interpolation-based control strategy is discussed.

26 March 2009
Verified
Conference Paper
Closed access
PDF file
SAStephan Algermissen
Stephan Algermissen
MRMichael Rose
Michael Rose
RKRalf Keimer
Ralf Keimer
Michael SinapiusMichael Sinapius
Michael Sinapius
In the past years parallel robots demonstrated their capability in applications with high-dynamic trajectories. Smart-structures offer the potential to further increase the productivity of parallel robots by reducing disturbing vibrations caused by high dynamic loads effectively. To investigate parallel robots and their applications, including suitable control concepts for smart-structures, the Collaborative Research Center 562 was founded by the German Research Council (DFG). The latest prototype within this research center is called Triglide. It is a four degree of freedom (DOF) robot with three translational and one rotational DOF. It realizes an acceleration of 10 g* at the effector. In the structure of the robot six active rods and a tri-axial accelerometer are integrated to control effector vibrations in three translational DOF. The main challenge of this control application is the position dependent vibration behavior. A single robust controller is not able to gain satisfying performance within the entire workspace. Therefore a strategy for describing the vibration behavior by linearization at several operating points is developed. Behavior in-between is approximated by a linear approach. On a trajectory robust controllers in all operating points are smoothly switched by robust gain-scheduling. The scheduling parameters are fast varying and though a suitable stability proof is defined, based on Small-Gain approach. Several transformations enhance the results from Small-Gain Theorem and reduce the usual conservatism. Experimental data is used to show the improvements made.