1 September 2004 in Journal of Intelligent Material Systems and Structures
The so-called “fish-mouth actuator”, developed at DLR in the framework of the Adaptive Wing project (ADIF), is a compact hybrid actuator based on the interaction of a shape memory material and a composite flexible mechanism. The actuator offers a high effective strain (ratio between actuator’s stroke and mounting dimension in the activation direction) and is therefore particularly interesting for the shape control of thin surfaces. In the ADIF project, the actuator development was focused on the realization of a wind-tunnel model for an adaptive wing with transonic bump. The actuator is designed and tested for a maximum stroke of 2 mm and a maximum force of 200 N. Its thickness (in activation direction) amounts to about 8 mm. If used with a feedback control system, it can reach a displacement precision of less than 1 mm. More than 400 single actuators were built and tested; 84 of them were integrated in the final system. In this paper, several design issues are discussed that are typical for such fully coupled hybrid systems. The design analysis and procedure used for the actuator development is described and a choice of experimental results is shown and discussed. The reported design philosophy and the related discussion include many concepts and solutions of general relevance which can be adopted for the development of similar hybrid actuators in the future.
14 September 2005 in Proceedings of the 37th International Symposium on Automation and Robotics in Construction (isarc)
I.A.A.R.C. - International Association for Automation and Robotics in Construction Civil Engineering
1 September 2004 in Journal of Intelligent Material Systems and Structures
Performance in high-speed mechanisms can be increased by means of a lightweight design. But, quite often, the resulting structures have the drawback of being susceptible to vibrations. This can be overcome by applying a smart-structures technology. In this work, an application to parallel mechanisms is presented, in which undesired vibrations are reduced by integrated piezoceramic (PZT) actuators and sensors, which are driven by a proper control system. As a basis for the development of suitable control laws, a proper simulation approach is to be used which is capable to model the mechanism’s dynamic behavior correctly, taking into account large motions. The multibody approach fulfills these requisites. The paper deals with the development of a fast C++-coded S-function in MATLAB/SIMULINK for a “five revolute joint” mechanism chosen as a test platform. This routine incorporates a multibody model with changing states. The flexibility of the bodies is taken into account in a modal form. The corresponding parameters are read from data files which can be generated by suitable preprocessors of proprietary multibody software packages like SIMPACK. The created model is compared with an equivalent SIMPACK-model and an interpolation-based control strategy is discussed.
1 December 2024 in Advanced Engineering Materials
Magnesium alloys pose challenges in additive manufacturing, due to the difference between the melting temperature of magnesium oxide (2825 °C) on the powder particles and the boiling point of metallic magnesium (1093 °C). A promising approach to overcoming the difficulties is the reduction of the thickness of the high‐melting oxide layer on the surface of the particles. Magnesium alloys, each containing varying amounts of strontium, neodymium, and yttrium, are cast and subsequently analyzed in terms of their microstructures, mechanical properties, oxide layer thicknesses, and corrosion behavior. Alloying magnesium with strontium results in a reduction of the oxide layer thickness, which reaches a minimum of 0.5 wt% strontium content. The presence of rare earth elements increases the strength of the alloys, although the inclusion of neodymium results in an increase in the oxide layer thicknesses. On the other hand, the oxide layer thickness remains unaffected when alloying with yttrium. However, further increases in strontium content up to the monolithic phase Mg17Sr2 have been found to result in a reduced effect on the open‐circuit potential. Further studies should be conducted to investigate the suitability of strontium as an alloying element to reduce the oxide layer thickness of magnesium particles.