Influence of wastes generated during juice production: apple, carrot and red beet, added to barley straw, on density of pellet mass, pellet hardness, ash content and calorific value was assessed. Dry mass content of additives in the substrate to pellet production was: 0, 10, 20 and 30% of the mixture weight. The relative humidity of the raw material was: 17.0, 19.5 and 22%. Higher percentages of additives and higher moisture content in the raw materials increased the hardness and density of the pellet. The contents of natural polymers such as lignin, hemicellulose and cellulose were determined in primary materials used to prepare substrate and in pellet. Changes in the determination of these substances was observed as a result of the granulation process.
Granulated beet pulp and wheat straw, first separately and then mixed in a weight ratio of 50/50%, underwent a pyrolysis process in a laboratory batch generator with process temperatures of 400 and 500 °C. The feedstock’s chemical composition and the pyrolysis products’ chemical composition (biochar and pyrolysis gas) were analysed. A synergistic effect was observed in the co-pyrolysis of the combined feedstock, which occurred as an increase the content of the arising gas in relation to the total weight of the products. and as a reduction of bio-oil content. The maximum gas proportion was 21.8% at 500 °C and the minimum between 12.6% and 18.4% for the pyrolysis of individual substrates at 400 °C. The proportions of the gases, including CO, CO2, CH4, H2, and O2, present in the resulting synthesis gases were also analysed. The usage of a higher pyrolysis final temperature strongly affected the increase of the CH4 and H2 concentration and the decrease of CO2 and CO concentration in the pyrolysis gas. The highest percentage of hydrogen in the synthesis gas, around 33%vol, occurred at 500 °C during co-pyrolysis.