This study successfully synthesized a core-shell-shell in the form of CoFe2O4-SiO2-TiO2 catalyst magnetic and recyclable. The catalyst for the photocatalytic degradation of methyl orange (MO) dye. Subsequently, the catalyst was subjected to XRD, FTIR, SEM-EDS, VSM, as well as UV-DRS...
1 October 2020 in Journal of Ecological Engineering
The rapid progress of the CPO industry in Indonesia is not in line with good waste management and utilization. Palm empty fruit bunch as the first waste from the CPO production process in Indonesia is mostly piled on the ground. Palm empty fruit bunch must be processed to reduce pollution and...
30 September 2022 in Bulletin of Chemical Reaction Engineering & Catalysis
Hydrogen-rich syngas from palm empty fruit bunch has been produced using CaO and bentonite as absorbent and catalyst. The gasification process is carried out at 550–750 °C at atmospheric pressure in the fixed bed gasifier with steam to biomass ratio (S/B) of 0–2.5 and Ca/C ratio of 0–2. The results showed that CaO only acts as absorbent during the process. Increasing the ratio of Ca/C and S/B has increased the concentration of and absorption of in the syngas. The addition of CaO did not significantly increase the production of and CO in the syngas. The concentration reaches about 78.16 vol% at 700 °C and Ca/C 2.
1 January 2023 in Journal of Ecological Engineering
Starch can be found in microalgae, the raw material for the third generation of bioethanol production. One of them is C. pyrenoidosa. This study was conducted to analyze the effect of α-amylase enzyme concentration on glucose contents produced and the effects of fermentation time on bioethanol...
The synthesis of ZnFe2O4 nanoparticles was performed using the solution combustion method with three types of fuel, namely urea, glycine, and ethylenediamine tetra-acetic acid (EDTA) with precursors (Zn(NO3)2.6H2O and Fe(NO3)3.9H2O. The combustion process was conducted in an open space at 300 °C for ± 1 h, resulting in a brownish-black ZnFe2O4. Meanwhile, the fuel type used in the process affects the physicochemical properties of ZnFe2O4. XRD analysis showed that ZnFe2O4 synthesized using urea, glycine, and EDTA had spinel structures with crystal sizes of 10.19, 20.34, and 27.21 nm, respectively. The FTIR spectra of ZnFe2O4 synthesized using the three fuel types had Zn-O and Fe-O stretching vibrations. Furthermore, the morphology of ZnFe2O4 synthesized using urea was more homogeneous than glycine and EDTA. The saturation magnetization of ZnFe2O4 synthesized using EDTA was 54.63 emu/g compared to glycine and urea, 50.93 and 44.73 emu/g, respectively. Finally, the surface area of synthesized ZnFe2O4 using urea, glycine, and EDTA were 116.4, 100.6, and 94.2 m2/g, respectively.