In the past, the main research and use of scintillators in extreme environments were mainly limited to high energy physics and the well-logging industry, but their applications are now expanding to reactor monitoring systems, marine and space exploration, nuclear fusion, radiation therapy, etc. In this article, we review and summarize single-crystal inorganic scintillator candidates that can be applied to radiation detection in extreme environments. Crucial scintillation properties to consider for use in extreme environments are temperature dependence and radiation resistance, along with scintillators’ susceptibility to moisture and mechanical shock. Therefore, we report on performance change, with a focus on radiation resistance and temperature dependence, and the availability of inorganic scintillator for extreme environments—high radiation, temperature, humidity and vibration—according to their applications. In addition, theoretical explanations for temperature dependence and radiation resistance are also provided.

We propose an integrated front-end data acquisition circuit for a hybrid ultrasound (US)-gamma probe. The proposed circuit consists of three main parts: (1) a preamplifier for the gamma probe, (2) a preprocessing analog circuit for the US, and (3) a digitally controlled analog switch. By exploiting the long idle time of the US system, an analog switch can be used to acquire data of both systems using a single output channel simultaneously. On the nuclear medicine (NM) gamma probe side, energy resolutions of 18.4% and 17.5% were acquired with the standalone system and with the proposed switching circuit, respectively, when irradiated with a Co-57 radiation source. Similarly, signal-to-noise ratios of 14.89 and 13.12 dB were achieved when US echo signals were acquired with the standalone system and with the proposed switching circuit, respectively. Lastly, a combined US-gamma probe was used to scan a glass target and a sealed radiation source placed in a water tank. The results confirmed that, by using a hybrid US-gamma probe system, it is possible to distinguish between the two objects and acquire structural information (ultrasound) alongside molecular information (gamma radiation source).

We compared thermal stability, open-circuit voltage, short-circuit current, and fill factor values of single-crystal Cadmium telluride (CdTe) grown using the vertical Bridgman (VB) technique and doped with group V elements (phosphorus and arsenic), and group Ⅰ element (sodium), followed by an annealing process. The sodium-doped CdTe maintained a hole density of 10¹⁶ cm⁻³ or higher; after annealing for a long time, this decreased to 10¹⁵ cm⁻³ or less. The arsenic-doped CdTe maintained a hole density of approximately 10¹⁶ cm⁻³ even after the annealing process; however its bulk minority carrier lifetime decreased by approximately 10%. The phosphorus-doped CdTe maintained its properties after the annealing process, ultimately achieving a hole density of ~10¹⁶ cm⁻³ and a minority carrier lifetime of ~40 ns. The characteristics of a single-crystal solar cell were evaluated using a solar cell device that contained single-crystal CdTe with various dopants. The sodium-doped sample exhibited poor interfacial properties, and its performance decreased rapidly during annealing. The samples doped with group V elements exhibited stable characteristics even during long-term annealing. We concluded, therefore, that group V elements dopants are more suitable for CdTe single-crystal-based solar cell applications involving thermal stress conditions, such as space missions or extreme fabrication temperature environments.

This paper introduces the characteristics and efficiency of post-treatment methods for enhancing the timing resolution of ceramic Ce:GAGG scintillators. The thermal annealing and surface treatments were included to analyze their impact on time-resolved photoluminescence (TRPL) and thermoluminescence (TL) characteristics. Optical properties were improved by suppressing nonradiative recombination due to the reduced surface defects, while heat-treatment removes traps as confirmed by TL measurements. TRPL decay characteristics revealed that samples treated with mechanical polishing followed by heat treatment exhibited the best scintillation performance, with a slow component of 272.3 ns. These findings will aid in developing techniques for improving the luminescence of other inorganic scintillators.

Surface modification of ceramic Ce-doped Gd₃Al₂Ga₃O₁₂ (Ce:GAGG) was performed by exposing small samples to anhydrous phosphoric acid (H₃PO₄) under different conditions (temperature and duration) to investigate the effects of chemical polishing treatment. When coupled to a photomultiplier tube (PMT) and used as a radiation detector, chemical treatment for 3 min at 190 °C improved the light (signal) output by 24.8% and energy resolution by 2.5% (percentage point), respectively. This can be attributed to a reduction in surface roughness that enhanced optical properties. Thus, chemical polishing could be a low-cost alternative to mechanical polishing especially for small or complex shaped ceramic scintillators.