Light-duty vehicles are increasingly incorporating plastic materials to reduce production costs and achieve lightweight designs. On average, a conventional car utilizes over 200 kg of plastic, comprising more than 23 different types, which often present challenges for recycling due to their incompatibility. Consequently, the focus on plastic recycling in end-of-life vehicles has intensified. This study aims to analyze critical car parts based on the plastics used, employing a novel thermodynamic approach that examines the embodied exergy (EE) of different plastics. Six vehicles from various segments, years, and equipment levels were assessed to understand their plastic compositions. The findings reveal that, on average, a vehicle contains 222 kg of plastic, accounting for 17.7% of its total weight. Among these plastics, 47.5% (105 kg) are utilized in car parts weighing over 1 kg, with plastics comprising over 80% of the part’s weight. The identified critical car parts include the front door trim panel, front and rear covers, fuel tank, floor covering, front lighting, dashboard, rear door trim panel, plastic front end, backrest pad, door trim panel pocket, plastic foam rear seat, rear lighting, window guide, molded headliner, bulkhead sound insulation, foam seat part, and wheel trim. Regarding their contribution to EE, the plastics with the highest shares are polypropylene—PP (24.5%), polypropylene and ethylene blends—E/P (20.3%), and polyurethane- PU (15.3%). Understanding the criticality of these car parts and their associated plastics enables targeted efforts in design, material selection, and end-of-life management to enhance recycling and promote circularity within the automotive industry.

In the last century, the economic growth has been accompanied by a worldwide diffusion of polymers for multiple applications. However, there is a growing attention to the environmental pollution and energy consumption linked to the unconditional use of plastic. In the present work, exergy is used as a measure of the resource consumption during the life cycle of polymers. Nine commercially diffused polymers are chosen, and their production chains are identified according to the “grave to cradle” approach. The global Embodied Exergy (EE) is calculated as the sum of the contribution of each step of the chain, including the production process and the Exergy Replacement Cost (ERC) of the fossil fuel. Then, recycling routes and the associated exergy consumption are analysed. Thermodynamic recycling indexes are developed depending on the final product, namely the crude polymeric material and the oil derivatives or structural molecules. The main results show that some commonly used polymers have a considerable impact in terms of EE (e.g., PET). Recycling indexes encourage the recycling processes, which are always energetically convenient (from 10% to 60% of exergy savings) compared with the production from virgin raw material. Results from EE calculation are used for the thermodynamic assessment of the plastic content of vehicle components, to obtain useful information for recycling practices development.

Development of an Integrated Solid Waste Management (ISWM) system is a continuous challenge for local communities. These systems should be properly designed, paying particular attention to the optimal connection of their subsystems. Among them, the Solid Waste (SW) collection system has a primary influence. The design variables (e.g. unit collection basin and weekly removal) can be optimized according to the variation of external parameters (e.g. penetration of selective collection, population density). The objective is the minimization of specific collection cost, maintaining the maximum collection efficiency. Once the collection system is optimized, its influence on the entire SW treatment chain is evaluated. To this end, a multi-objective optimization is implemented taking into account the global cost and exergy efficiency of waste treatment. The analysed system is composed by a paper recycling plant for cardboard production and a Mechanical Biological Treatment plant for the Residual Unsorted Waste treatment, with production of Refused Derived Fuel.