Ya Li

Dr. Ya Li

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2020 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Hui YangHui Yang
Hui Yang
YLYa Li
Ya Li
HLHeyun Lin
Heyun Lin
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
SLShukang Lyu
Shukang Lyu
This paper proposes a novel topology of consequent-pole switched flux permanent magnet (SFPM) machine with U-shaped permanent magnets (PMs) for torque improvement, which is attractive for traction applications. The proposed machine is geometrically derived from a conventional sandwiched SFPM machine by introducing airspace flux barriers and flat-type PMs. The proposed design can provide an effective circulating path for low-order field harmonics. This property is beneficial for the torque capability enhancement. The machine topologies and operating principle are introduced first. Moreover, a magneto-motive force (MMF) permeance based model for the proposed SFPM machines is employed to analytically reveal the underlying working mechanism. The electromagnetic characteristics of the two proposed SFPM machines are investigated by finite element (FE) analyses, and compared with those of the conventional sandwiched SFPM machine. Finally, a 6/13-pole SFPM machine with U-shaped PM structure is manufactured and tested to experimentally validate the theoretical and FE analyses.

18 February 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Hui YangHui Yang
Hui Yang
Wei LiuWei Liu
Wei Liu
HZHao Zheng
Hao Zheng
HLHeyun Lin
Heyun Lin
Z. Q. ZhuZ. Q. Zhu
Z. Q. Zhu
XHXin Huang
Xin Huang
This article focuses on a newly developed 30-kW hybrid-magnetic-circuit variable flux hybrid magnet memory machine (HMC-VFMM) with a delta-type magnet arrangement for automotive traction applications. The proposed HMC-VFMM can improve the torque capability with effective utilization of flux concentration due to delta-type hybrid magnet arrangement while decreasing the required magnetization current level due to the dual-layer (DL) permanent magnet (PM) design. The presence of the parallel magnetic circuit can permit a satisfactory magnetization state (MS) manipulation range. Meanwhile, the DL series-type PM configuration can maintain beneficial unintentional demagnetization withstand capability. The machine topology and operating principle are described. Furthermore, the magnetic circuit model of the proposed machine structure is developed to identify and confirm the feasibility of the electromagnetic performance enhancement. Besides, the electromagnetic characteristics of the proposed HMC-VFMM are comprehensively analyzed and compared with those of a benchmark delta-type PM machine based on the Nissan Leaf drive motor. Finally, a 30-kW prototype is manufactured and tested to verify the feasibility of the proposed HMC-VFMM design in the potential context of electric vehicle applications.

1 December 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
YLYa Li
Ya Li
Hui YangHui Yang
Hui Yang
HLHeyun Lin
Heyun Lin
LQLing Qin
Ling Qin
SLShukang Lyu
Shukang Lyu
In this paper, the field modulation effect (FME) of consequent-pole permanent magnet (CPM) machine is revealed and investigated from the perspective of a double-side slotting effect (DSSE), which can characterize and elaborate its torque production mechanism. Since the CPM machine features that both PM and armature fields are modulated by stator /rotor teeth, which generates more field harmonics contributing to the torque production compared with conventional surface-mounted PM (SPM) machine. A simplified PM magneto-motive force (MMF)-permeance based model is first established to confirm the effective working harmonics of the CPM machine. The contributions of dominant air-gap field harmonics to the torque production are then demonstrated and quantified based on Maxwell stress tensor (MST) method. The impacts of FME on the torque performance of the CPM machines with different stator-slot/rotor pole combinations are subsequently investigated by the finite element (FE) method and compared with those of conventional SPM counterparts. Besides, the influences of rotor PM parameters on the FME of the CPM machine are also evaluated. Finally, the experimental measurements on a 12-slot/14-pole CPM machine prototype are carried out to validate the theoretical and FE analyses.

18 July 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
YMYao Meng
Yao Meng
Shuhua FangShuhua Fang
Shuhua Fang
YLYa Li
Ya Li
Yuxiang ZhongYuxiang Zhong
Yuxiang Zhong
LQLing Qin
Ling Qin
This paper proposes new dual-stator flux modulated machines with dual-PM excitation (DS-FMDPMMs) for direct-drive applications. The proposed DS-FMDPMMs are characterized by employing consequent-pole (CP) PMs on both the stator and rotor sides. By using dual-layer CP PMs, the DS-FMDPMMs can perform the bidirectional flux modulation effect to enhance the torque capability. In addition, the merits of dual-stator structure, such as high space utilization, high torque density and power factor are inherited in the proposed machines. The design principle of DS-FMDPMM is provided at first, and the formed three representative DS-FMDPMMs with different stator-PM arrangements are proposed. Then, the design considerations of three DS-FMDPMMs are described in detail, which includes the armature winding design, the selection of stator-slot/rotor-pole combination and the influence of critical structural parameters on torque. In order to find an optimal direct-drive candidate among the three DS-FMDPMMs, a quantitative electromagnetic performance comparison is developed through finite element analysis (FEA). The results show that among the three machines, DS-FMDPMM-I accommodates the highest torque density, lowest torque ripple, best over-load torque capability and highest efficiency. Moreover, to further verify its performance advantages, the electromagnetic performances of DS-FMDPMM-I and two typical dual-stator flux modulated PM machines are compared through FEA. Finally, a prototype of the optimal DS-FMDPMM is manufactured and tested to validate the effectiveness of FEA-predicted results.

16 February 2019 in Energies
Verified
Journal Article
Open access
PDF file
YLYa Li
Ya Li
Hui YangHui Yang
Hui Yang
HLHeyun Lin
Heyun Lin
Shuhua FangShuhua Fang
Shuhua Fang
WWWeijia Wang
Weijia Wang
This paper proposes a novel magnet-axis-shifted hybrid permanent magnet (MAS-HPM) machine, which features an asymmetrical magnet arrangement, i.e., low-cost ferrite and high-performance NdFeB magnets, are placed in the two sides of a “▽”-shaped rotor pole. The proposed magnet-axis-shift (MAS) effect can effectively reduce the difference between the optimum current angles for maximizing permanent magnet (PM) and reluctance torques, and hence the torque capability of the machine can be further improved. The topology and operating principle of the proposed MAS-HPM machine are introduced and are compared with the BMW i3 interior permanent magnet (IPM) machine as a benchmark. The electromagnetic characteristics of the two machines are investigated and compared by finite element analysis (FEA), which confirms the effectiveness of the proposed MAS design concept for torque improvement.

27 October 2021 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
YLYa Li
Ya Li
Hui YangHui Yang
Hui Yang
HLHeyun Lin
Heyun Lin
Wei LiuWei Liu
Wei Liu
Xing ZhaoXing Zhao
Xing Zhao
This article proposes a new dual-sided permanent magnet (DSPM) machine with flux-concentrated U-shaped permanent magnets (PMs) in stator, and consequent-pole PMs in rotor, respectively. The proposed DSPM machine can perform a bidirectional field modulation effect (BFME) to enhance the effective harmonics, and hence improving torque capability. A magneto-motive force-permeance based model is employed to reveal the torque production mechanism. The torque contributions of main-order working field harmonics are identified and quantified by employing a hybrid finite-element (FE)/analytical method with a unified average torque equation. In order to confirm the merits of the proposed design, the basic electromagnetic characteristics of the proposed DSPM configuration are investigated and compared with those of an existing DSPM machine with stator consequent-pole PM design. Besides, in order to further reduce the cogging torque, a parallel complementary design is adopted for the final prototyping. Finally, a 6-slot/14-pole-pair prototype is manufactured, and some experimental measurements are carried out to validate the theoretical and FE analyses.