This paper proposes a new machine learning technique based multi-level optimization (MLT-MLO) method to optimize a dual-stator flux modulated machine with dual-PM excitation (DS-FMDPMM). The proposed MLT-MLO method using multi-level optimization can effectively alleviate the calculation burden caused by the multiple design variables in DS-FMDPMM. In addition, the proposed MLT-MLO method combines the support vector machine regression (SVR) and the non-dominated sorting genetic algorithm-II (NSGA-II) to conduct the motor optimization, which can effectively reduce the calculation time and improve the optimization efficiency. Moreover, before the optimization, a simplified analytical model is built to determine the design variables and a sensitivity analysis is carried out to reduce the workload. The topology of DS-FMDPMM and the flow chart of the proposed MLT-MLO method are introduced at first. Then, based on the proposed MLT-MLO method, the DS-FMDPMM is comprehensively optimized for the high torque production and low torque ripple. Finally, the finite element and experimental validations are carried out, which verify the effectiveness of the proposed MLT-MLO method.
18 July 2022 in IEEE Transactions on Industry Applications
This paper proposes new dual-stator flux modulated machines with dual-PM excitation (DS-FMDPMMs) for direct-drive applications. The proposed DS-FMDPMMs are characterized by employing consequent-pole (CP) PMs on both the stator and rotor sides. By using dual-layer CP PMs, the DS-FMDPMMs can perform the bidirectional flux modulation effect to enhance the torque capability. In addition, the merits of dual-stator structure, such as high space utilization, high torque density and power factor are inherited in the proposed machines. The design principle of DS-FMDPMM is provided at first, and the formed three representative DS-FMDPMMs with different stator-PM arrangements are proposed. Then, the design considerations of three DS-FMDPMMs are described in detail, which includes the armature winding design, the selection of stator-slot/rotor-pole combination and the influence of critical structural parameters on torque. In order to find an optimal direct-drive candidate among the three DS-FMDPMMs, a quantitative electromagnetic performance comparison is developed through finite element analysis (FEA). The results show that among the three machines, DS-FMDPMM-I accommodates the highest torque density, lowest torque ripple, best over-load torque capability and highest efficiency. Moreover, to further verify its performance advantages, the electromagnetic performances of DS-FMDPMM-I and two typical dual-stator flux modulated PM machines are compared through FEA. Finally, a prototype of the optimal DS-FMDPMM is manufactured and tested to validate the effectiveness of FEA-predicted results.
1 December 2020 in IEEE Transactions on Energy Conversion
In this paper, the field modulation effect (FME) of consequent-pole permanent magnet (CPM) machine is revealed and investigated from the perspective of a double-side slotting effect (DSSE), which can characterize and elaborate its torque production mechanism. Since the CPM machine features that both PM and armature fields are modulated by stator /rotor teeth, which generates more field harmonics contributing to the torque production compared with conventional surface-mounted PM (SPM) machine. A simplified PM magneto-motive force (MMF)-permeance based model is first established to confirm the effective working harmonics of the CPM machine. The contributions of dominant air-gap field harmonics to the torque production are then demonstrated and quantified based on Maxwell stress tensor (MST) method. The impacts of FME on the torque performance of the CPM machines with different stator-slot/rotor pole combinations are subsequently investigated by the finite element (FE) method and compared with those of conventional SPM counterparts. Besides, the influences of rotor PM parameters on the FME of the CPM machine are also evaluated. Finally, the experimental measurements on a 12-slot/14-pole CPM machine prototype are carried out to validate the theoretical and FE analyses.
This paper proposes a new hybrid-excited (HE) flux reversal arc permanent magnet (PM) machine (PS-HE-FRAPMM) having partitioned stators which could be applied on large telescope application. The proposed PS-HE-FRAPMM combines the arc PM machine, the stator-PM machine, and the HE machine, which incorporates the merits of high torque, low cogging torque, and wide flux adjustment capability. The machine topology, operation principle, and rotor mechanical analysis of the proposed PS-HE-FRAPMM are first addressed. Then, the different slot-rotor pole combinations are comprehensively investigated. Moreover, the main structural parameters of the proposed machine are optimized for maximizing the torque and minimizing the torque ripple. Finally, the electromagnetic performances of both the proposed PS-HE-FRAPMM and single-stator HE-FRAPMM (SS-HE-FRAPMM) are comprehensively evaluated and compared. The comparison results show that compared with the SS-HE-FRAPMM, the proposed PS-HE-FRAPMM exhibits higher torque capability, lower torque ripple, and relatively wider flux adjustment capability.
This article proposes a new partitioned stator hybrid-excited flux reversal machine with dual-PM (PS-HEFRDPMM), in which field windings are placed in the inner stator and permanent magnets (PMs) are employed on both the rotor and outer stator. By utilizing dual-PM excitation, the proposed PS-HEFRDPMM is able to introduce the bidirectional flux modulation effect to transmit high torque production. In addition, a good flux weakening capability can be obtained by using dc current to regulate air-gap magnetic field, which is beneficial to expand the speed range of machine. The machine topology, operating principle, and design considerations of PS-HEFRDPMM are described, respectively. The electromagnetic characteristics of PS-HEFRDPMM under different excitation states are comprehensively analyzed using finite element method. The results show that the proposed PS-HEFRDPMM can provide the merits of high toque capability with low torque ripple, good over-load torque capability, high power factor and efficiency, as well as good flux weakening capability.
This article proposes a new dual-stator consequent-pole (CP) flux reversal machine with triple-PM excitation (T-DSCPFRPMM), in which the two stators and rotor are all incorporated with CP permanent magnet (PM) arrangement. The employment of triple-PM excitation is beneficial to enhance the flux densities in the inner and outer air gaps. In addition, the ferromagnetic poles of rotor and stators are, respectively, used to modulate the magnetic field excited by stator-PM and rotor-PM, which introduces the bidirectional flux modulation effect into the proposed machine to enhance the torque production. The topology, operation principle, and design consideration of the proposed T-DSCPFRPMM are analyzed, respectively. The electromagnetic performances of the proposed machine under stator-PM excitation only, rotor-PM excitation only, and triple-PM excitation are evaluated and compared by finite-element analysis. The predicted results show that by using triple-PM excitation, the proposed machine can offer the superior torque production with low torque ripple, excellent overload torque capability, high efficiency and high-power factor, which are desirable for direct-drive applications.