Purpose: This paper aims to present the methodology to determine Archard’s wear coefficient. By applying this coefficient into the numerical simulation of wear, it is possible to predict wear without long lasting and usually expensive experiments. Design/methodology/approach: To determine necessary particles of Archard’s equation and calculate wear coefficient K, an experimental investigation is proposed. Afterwards, the wear simulation is executed in FEM software ANSYS 18.1. Analytical method is offered to determine worn volume for cylinder-in-cylinder contact, based on “inclination” of inner cylinder. Findings: Comparing the value of Archard’s coefficient obtained by this experimental investigation with the values from the literature for the similar materials, high correlation is noted. Furthermore, numerically calculated contact pressure is confirmed with analytical method. Trend of pressure decrease due to wearing process, as well as due to increase of contact surface is observed. Practical implications: Since the prediction of the wear is closely related to the life cycle assessment of bearings, and the machines in general, it has significant practical importance for designers. Originality/value: Determination of Archard’s coefficient is usually performed by conventional pin-on-disk tribometers. This methodology offers a different approach for the determination of Archard’s wear coefficient for cylinder-in-cylinder contact, which is convenient for shaft-sliding bearing contact.
This paper considers the problem of constrained multi-objective non-linear optimization of planetary gearbox based on hybrid metaheuristic algorithm. Optimal design of planetary gear trains requires simultaneous minimization of multiple conflicting objectives, such as gearbox volume, center distance, contact ratio, power loss, etc. In this regard, the theoretical formulation and numerical procedure for the calculation of the planetary gearbox power efficiency has been developed. To successfully solve the stated constrained multi-objective optimization problem, in this paper a hybrid algorithm between particle swarm optimization and differential evolution algorithms has been proposed and applied to considered problem. Here, the mutation operators from the differential evolution algorithm have been incorporated into the velocity update equation of the particle swarm optimization algorithm, with the adaptive population spacing parameter employed to select the appropriate mutation operator for the current optimization condition. It has been shown that the proposed algorithm successfully obtains the solutions of the non-convex Pareto set, and reveals key insights in reducing the weight, improving efficiency and preventing premature failure of gears. Compared to other well-known algorithms, the numerical simulation results indicate that the proposed algorithm shows improved optimization performance in terms of the quality of the obtained Pareto solutions.
26 February 2021 in Journal of the Brazilian Society of Mechanical Sciences and Engineering