In this study we developed electrospun cellulose acetate nanofibers (CANFs) that were loaded with a model non-steroidal anti-inflammatory drug (NSAID) (ibuprofen, Ib) and coated with poly(acrylamide) (poly-AAm) hydrogel polymer using two consecutive steps: an electrospinning process followed by photopolymerization of AAm. Coated and non-coated CANF formulations were characterized by several microscopic and spectroscopic techniques to evaluate their physicochemical properties. An analysis of the kinetic release profile of Ib showed noticeable differences due to the presence or absence of the poly-AAm hydrogel polymer. Poly-AAm coating facilitated a constant release rate of drug as opposed to a more conventional burst release. The non-coated CANFs showed low cumulative drug release concentrations (ca. 35 and 83% at 5 and 10% loading, respectively). Conversely, poly-AAm coated CANFs were found to promote the release of drug (ca. 84 and 99.8% at 5 and 10% loading, respectively). Finally, the CANFs were found to be superbly cytocompatible.
Printed cotton fabrics using different concentration of honey gum( propolis )inside printing paste Propolis is a gum has been used as a traditional cure for various diseases due to a variety of biological activities of this folk medicine. In the present work, an attempt made to investigate antibacterial formulation. The interaction between printing paste containing propolis and cotton was confirmed using FTIR. Morphological properties and printing pigment distribution was examined using SEM. Printing color strength and fastness properties were examined. Antibacterial activity was explored against gram positive, negative and yeast. ATR/IR showed different intensities at OH region that confirm interaction between propolis and fabrics and in comparison with fabric and printed cotton without propolis. Thick coating and highly distributed fabrics was visualized at SEM images at printed cotton fabrics containing propolis. The color strength of printed cotton fabrics containing propolis was directly proportional with propolis content up to 4%. Printed cotton fabrics containing propolis showed stability at all fastness evaluations. Printed cotton fabrics containing 4% propolis showed efficient antimicrobial activity towards both gram positive and negative bacteria
Cellulose powder / poly (N-vinyl-2-pyrrolidone) (CP/PVP) and carboxymethylcellulose / poly (N-vinyl-2-pyrrolidone) (CMC/PVP) hydrogels were synthesized at different reaction conditions using ammonium persulphate as initiator. The optimum reaction conditions to prepare such gels are PVP molecular weight (40000 Dalton), PVP concentration (60%), APS/polymers weight ratio (100%), reaction time (45 min), reaction temperature (90 OC), as well as CP/PVP or CMC/PVP weight ratio (25%). The prepared matrices were characterized via FTIR as well as scan electron microscope analysis. The release profiles of sodium diclofenac form the CP/PVP and CMC/PVP gels at pH 7 were studied. Release studies showed burst release for both matrices at first 30 min followed by sustained behavior. matrices PVP/CMC showed highest release of DS due to repulsive forces between polymer chains.
New nanocomposite based on chitosan and acrylamide and silver nanoparticles has been prepared to produce wound dressing has superior properties as Hemostatic and antibacterial activity. Chitosan successfully grafted with acrylamide via free radical copolymerization using potassium persulphate. Four different chitosan grafted acrylamide prepared and fully characterized through nitrogen content and ATR/IR. Cs-g-PAAM partially hydrolyzed at basic condition in presence of silver nitrate in order to prepare Cs-g-PAAm-co-PAAc/Ag nanococomposite. The optimum condition for preparing homogenous and well distributed was examined using grafted polymers were characterized using TEM and UV-vis absorption. Cs:PAAm (1:1) pH 11 and 120 min showed homogenous spherical silver nanoparticles and distributed particles lying at nanosize range between 10-30 nm. SEM-EDX and XRD used to confirm binding silver to chitosan hybrid chains forming newly nanocomposite. Produced composite showed complete solubility at neutral medium condition that qualifies produced composite to be used at different medical and industrial applications.
Producing a valuable nanofibers can occurs by electrospinning, as it consider one of advanced spinning techniques that can obtain functionalized fibers for smart application. The current work demonstrated for new exploration of electrospinning process of cellulose acetate (CA) from trisolvent mixtures. 5% water added to stable CA Electrospinning solution that contains DMAc/AC (1:2). Five different speeds 6, 12, 22, 32 and 40 ml/hr were applied to CA solution. The reflectance of water addition on electrospun fiber properties on fiber diameter and homogeneity was visualized using SEM and Mechanical properties also Contact angles of the preformed nanofibers were characterized. In addition to air permeability test were also evaluated. The obtained fibers showed different morphology against spinning rate. Surface behavior of spun fibers is nearly similar to pristine cellulose acetate (CA) fiber spanned from di-solvent. Spinning rate affects positively on tensile properties and negatively on elongation modulus. The spinning rates indirectly proportional to fiber diameter that reflected on the air permeability. Spinning rate 22ml/hr showed the optimum velocity for spinning from tri-solvent CA solution. Conclusionally, the obtained results open the door for high speed electrospinning process saving time and cost achieving the research target.
This study aimed to investigate the wound healing effects of Peppermint (P) single and its co-emulsion with black seed oil (P/B) or Frankincense oil (P/F) through the ultrasonication process. Successfully Prepared nano-emulsions were examined through TEM, Particle size analyzer (PS), and Zeta potential (ZP) techniques. The produced emulsion was applied to non-woven (NM) by spraying technique. Non-woven surface morphology was produced and examined through a scanning electron microscope (SEM). Antibacterial activities of NW-treated emulsion were examined against Staph. Aureus as gram-positive bacteria and Escherichia. Coli as gram-negative bacteria compared with pristine NW-emulsions applied onto nonwoven dressing (NW) and their healing effect to second burn degree were examined through reduction burn size. Additionally, Histopathological evaluations also evaluated for burn skin samples. Nano-emulsion droplet sizes lie between 20 and 70 nm and are increased by storage. The Zeta potential of P/F showed the highest negative charge compared with all prepared emulsions. FTIR-ATR charts showed new peaks for oils treated nonwoven compared with nonwoven samples. The P/F showed higher zeta potential measurement compared with other single or Co-emulsions. For burn healing in-vivo, P/F showed complete healing with original skin color compared with other groups. While histopathological evaluation showed a homogenous epidermis with more granulation tissue formation than P/B and all single emulsion oils. Antimicrobial evaluation of co-emulsion showed higher results than single oils due to the synergistic effect between their constituents. The results of co-emulsion oils showed superior properties and burn healing, especially P/F co-emulsion oil.