Photovoltaic (PV) installations have traditionally relied on a conventional south-facing orientation, which maximizes energy production at noon but has lower energy generation in the morning and afternoon. Vertical photovoltaic (VPV) systems have emerged as promising alternatives to address this inconsistency. Vertical photovoltaic systems can enhance energy generation by facing east in the morning and west in the afternoon. We compared the performance of n-tunnel oxide passivated contact (n-TOPCon) and p-passivated emitter and rear contact (p-PERC) cells in vertical photovoltaic systems to determine whether the optimal installation direction of bifacial vertical photovoltaics is east or west. Our findings indicated that n-TOPCon cells exhibited higher energy yields than p-PERC cells, with a difference of approximately 8%, attributed to the superior bifaciality and lower temperature coefficient of power of n-TOPCon. Additionally, the energy yield was higher for n-TOPCon modules when the front faced east, whereas the PERC modules performed better with a west-facing front. This contributes to the knowledge of the factors for energy production in vertical photovoltaic systems and the optimization of installation configurations.

In this work, nickel silicide was applied to tandem solar cells as an interlayer. By the process of thermal evaporation, a layer of NiO_x, hole transport layer (HTL) was deposited on n⁺ poly-Si layer directly. Nickel silicide was simultaneously formed by nickel diffusion from NiO_x to n⁺ poly-Si layer during the deposition and annealing process. The I–V characteristics of NiO_x/n⁺ poly-Si contact with nickel silicide showed ohmic contact and low contact resistivity. This structure is expected to be more advantageous for electrical connection between perovskite top cell and TOPCon bottom cell compared to the NiO_x/TCO/n⁺ poly-Si structure showing Schottky contact. Furthermore, nickel silicide and Ni-deficient NiO_x thin film formed by diffusion of nickel can improve the fill factor of the two sub cells. These results imply the potential of a NiO_x/nickel silicide/n⁺ poly-Si structure as a perovskite/silicon tandem solar cell interlayer.