Laser surgery is a rising surgical technique, which offers several advantages compared to the traditional scalpel. However, laser surgery lacks a contact-free feedback system which offers high imaging contrast to identify the tissue type ablated and also a high penetration depth. Photoacoustic imaging has the potential to fill this gap. Since photoacoustic detection is commonly contact based, a new non-interferometric detection technique based on speckle-analysis for remote detection is presented in this work. Phantom and ex-vivo experiments are carried out in transmission and reflection-mode for proof of concept. In summary, the potential of the remote speckle sensing technique for photoacoustic detection is demonstrated. In future, this technique might be applied for usage as a remote feedback system for laser surgery, which could help to broaden the applications of lasers as smart surgical tools.
In medical applications, hyper-spectral imaging is becoming more and more common. It has been shown to be more effective for classification and segmentation than normal RGB imaging because narrower wavelength bands are used, providing a higher contrast. However, until now, the fact that hyper-spectral images also contain information about the three-dimensional structure of turbid media has been neglected. In this study, it is shown that it is possible to derive information about the depth of inclusions in turbid phantoms from a single hyper-spectral image. Here, the depth information is encoded by a combination of scattering and absorption within the phantom. Although scatter-dominated regions increase the backscattering for deep vessels, absorption has the opposite effect. With this argumentation, it makes sense to assume that, under certain conditions, a wavelength is not influenced by the depth of the inclusion and acts as an iso-point. This iso-point could be used to easily derive information about the depth of an inclusion. In this study, it is shown that the iso-point exists in some cases. Moreover, it is shown that the iso-point can be used to obtain precise depth information.
Brillouin scattering is a nonlinear effect in optical fibers which can be used for temperature or strain sensing. For read-out and analysis of the scattered signal, spectrum-analyzers with a very high resolution or complex detection systems are currently needed. In this work, a new detection modality for radial acoustic modes in optical fibers based on speckle-sensing is presented.
The analytical technique laser-induced breakdown spectroscopy (LIBS) is becoming an attractive technique in the field of medicine. One emerging application is the differentiation of biological tissues in real-time during laser surgery. This work attempts to further investigate the use of LIBS together with a surgical Er:YAG laser. The main goal here is to investigate the effect of body fluids as potential contaminants during LIBS based differentiation of soft tissues. Furthermore, the work attempts to exploit the use of the surgical laser as a cleaning laser and compares the effect when only the LIBS laser is used for tissue differentiation. The study shows that body fluids have a significant influence on the LIBS spectra and that a surgical laser might serve as an in-vivo cleaner leading to improved tissue classification during laser surgery.
Photoacoustic imaging is a new, rising imaging technique which combines high penetration depth with a good image contrast. It is demonstrated for the first time that remote photoacoustic sensing by speckle-analysis can be performed in the MHz-sampling range using a low-resolution diode array by showing experimental results. Phantoms and ex-vivo samples are measured in transmission-mode. In addition, the detection sensitivity of the new system is estimated. The new technique might help in future to broaden the applications of photoacoustics in special applications like wound imaging, endoscopy or guiding laser surgeries.
We propose a novel technique for measurements of Brillouin acoustic vibrations based on temporal tracking of back-reflected speckle patterns. The proposed method holds the potential to enhance some of the limiting factors in Brillouin frequency measurements while yielding increased spatial resolution and shorter scanning times of the inspected fiber. Experimental results show the capabilities of the proposed method are presented, using a two pump-waves configuration.