This paper describes the transmission torque characteristics in a surface permanent magnet-type (SPM-type) magnetic gear. The operating principle of this gear and its transmission torque under the synchronous operation in accordance with the gear ratio are formulated. And the high-order components contained in the cogging torque are verified by employing the 3-D finite element method (FEM) and carrying out measurements on a prototype. Furthermore, a method for reducing the cogging torque is discussed.
Image deteriorations due to vibrations have become a problem in autonomous systems such as unmanned aerial vehicles, robots, and autonomous cars. To suppress the vibration, a camera stabilizer using a gimbal mechanism is widely used. However, the size and weight of the system increase because the conventional image stabilization systems require some actuators and links to drive in multi-axes. In order to solve these problems, we proposed a novel three-degree-of-freedom (3DOF) electromagnetic actuator for image stabilization. The actuator can be driven by only three-phase and has a simple structure and control system. This paper describes the experimental verification of the proposed actuator. The torque characteristics are clarified, and the analysis and measured torque characteristics are compared to verify the analysis validity. For verifying the dynamic performance, the frequency characteristics are measured. The effectiveness of the proposed magnetic structure and operating principle are investigated.
24 February 2009 in IEEE Transactions on Magnetics
We are developing a shear-type compact MR brake (SCMRB), which can control the share stress because the viscosity of MR fluid varies by the magnetic field and shear rate. In order to design the high response brake, it is important to evaluate the response characteristics by taking into account the non-linearity of stress versus flux density and stress versus rotation speed. This paper presents the response characteristics analysis method of the SCMRB using the 3-D finite element method (FEM). The effectiveness of the analysis is clarified through the comparison with the measured ones. Furthermore, the usefulness of this brake is also clarified through the response characteristics.
The compliance of muscles with external forces and the structural stability given by biarticular muscles are important features of animals to realize dynamic whole body motions such as running and hopping in various environments. For this reason, we have been studying an electromagnetic linear actuator. This actuator can emulate the behavior of a human muscle such as the spring-damper characteristics by quick control of the output force (i.e. impedance control) and it is expected to be used as an artificial muscle. In this paper, we develop a monopedal robot possessing bi- and mono-articular muscles implemented by linear actuators. Thanks to the biarticular muscle, the bouncing direction of the robot can be controlled by changing the stiffness ellipse at the endpoint (i.e. foot) of the robot. We confirm that the bouncing direction of the robot can be controlled and hopping can be achieved by changing the stiffness ellipse.
Active control engine mounts employing linear oscillatory actuators are mounted onto automobiles to reduce the frame vibration and noise. In conventional ACMs, the electric power consumption is high, and we clarify the causes of the high electric power consumption by dynamic simulation. Moreover, we propose a new LOA with two movers. The operational principle is described and the effectiveness of the ACM is verified using dynamic simulation.