Monitoring of the stress state of bridges by the use of the Barkhausen noise technique has been already introduced and this method can be adapted for monitoring of component’s overstressing. Measurement of Barkhausen noise on real bridges is carried out through the coating applied as a layer to increase the corrosion resistance of bodies. However, it was found that the thickness of the coating could vary, which in turn affects the Barkhausen noise signals and makes it difficult to assess the real stress state. For this reason, this paper deals with attenuation of Barkhausen noise emission due to variable thicknesses of coatings on the steel S460MC. It was found that increasing the thickness progressively decreases the Barkhausen noise emission and shifts the Barkhausen noise envelopes to the higher magnetic fields. Furthermore, the thickness of the coating also affects the relationship between the tensile stress and the Barkhausen noise.

Low alloyed steels of low, medium, or high strength are frequently used for many applications in the automotive, civil (bridges), aerospace, and petrochemical industries. A variety of thermomechanical regimes, in which these steels can be produced, enable customization of their matrix with respect to their fatigue resistance, resistance against friction and impact wear, fracture toughness, corrosion resistance, etc. This study analyses the influence of magnetising conditions on Barkhausen noise and other extracted parameters. It was found that the increasing magnetising frequency makes Barkhausen noise weaker, especially in the high strength low alloyed steels, as a result of the decreasing magnetic field in a sample. For this reason, increasing fraction of domain walls is unpinned at the higher frequencies. Barkhausen noise for the high strength low alloyed steels at higher frequencies is remarkably attenuated. Moreover, the different behaviour with respect to direction of the sheet rolling and the transversal direction, can be found due to realignment of the domain walls. This study demonstrates that the position of Barkhausen noise envelopes and the number of Barkhausen noise pulses increase in a systematic manner at the lower magnetising frequencies. Those parameters can be employed for distinction of the low alloyed steels, investigated in this study. However, the increasing magnetising frequency makes attenuation of Barkhausen noise more remarkable for the low alloyed steels of the higher strength. Therefore, the effective value of Barkhausen noise, at the magnetising frequency 750 Hz, in the rolling direction exhibits the systematic descent along with the increasing yield strength. This parameter can be used for distinction of the low alloyed steels after their thermomechanical processing, as well.