Ion-sensitive field-effect transistors (ISFETs) form a high sensitivity and scalable class of sensors, compatible with advanced complementary metal-oxide semiconductor (CMOS) processes. Despite many previous demonstrations about their merits as low-power integrated sensors, very little is known about their noise characterization when being operated in a liquid gate configuration. The noise characteristics in various regimes of their operation are important to select the most suitable conditions for signal-to-noise ratio (SNR) and power consumption. This work reports systematic DC, transient, and noise characterizations and models of a back-end of line (BEOL)-modified foundry-made ISFET used as pH sensor. The aim is to determine the sensor sensitivity and resolution to pH changes and to calibrate numerical and lumped element models, capable of supporting the interpretation of the experimental findings. The experimental sensitivity is approximately 40 mV/pH with a normalized resolution of 5 mpH per µm2, in agreement with the literature state of the art. Differences in the drain current noise spectra between the ISFET and MOSFET configurations of the same device at low currents (weak inversion) suggest that the chemical noise produced by the random binding/unbinding of the H+ ions on the sensor surface is likely the dominant noise contribution in this regime. In contrast, at high currents (strong inversion), the two configurations provide similar drain noise levels suggesting that the noise originates in the underlying FET rather than in the sensing region.
One of the main advantages of Ion-Sensitive Field-Effect Transistor (ISFET) technology is the capability to exploit technological advancements initially developed for conventional FETs for logic applications, such as the employ of high-k dielectrics for the gate and the definition of fully depleted and gate all around structures. Negative Capacitance (NC) is an emerging concept exploiting ferroelectric materials integrated in field effect transistor gate stacks in order to decrease their subthreshold swing and improve the drain current (ID) overdrive in order to reach more energy efficient devices, operated at lower voltage. In this work, we investigate and experimentally demonstrate the application of this concept to enable subthermionic ISFETs with enhanced current sensitivity and low power operation. A physical model for the introduced NC ISFET is presented and optimized by fitting of the experimental results, providing further insights into the sensor parameters and a predictive tool for the design of future NC-based sensors.
25 March 2022 in IEEE Transactions on Electron Devices
In this work, we experimentally explore and compare FET gate stacks with and without an inner metal plane between a linear dielectric (SiO 2 ) and a ferroelectric layer (Si-doped HfO 2 ) operating in the negative capacitance (NC) regime. The use of nanosecond-range pulses enables us to observe hysteresis-free NC and reconstruct the ${S}$ -shaped polarization-voltage curves. The devices with the inner metal plate show a higher equivalent NC value, which offers the potential for a higher differential amplification in a NC-FET. However, such a NC region is observed over a smaller range of electric field and polarization, which leads to hysteresis. Moreover, the presence of a metal layer in between the ferroelectric and the insulator favors domain formation resulting in destabilization of the NC effect. For the gate structure where the ferroelectric and the insulator are in contact, the ${S}$ -shaped polarization-voltage curve shows a better agreement with Landau–Ginzburg–Devonshire formalism for the monodomain state. The uniform polarization closely mimicking the monodomain state is possible due to the polarization imprint occurring due to the structural asymmetry. By nanometer resolution polarization mapping via off-resonance piezoelectric force microscopy (PFM), we corroborate the presence of imprint, which can intrinsically stabilize one ferroelectric state. Overall, the article provides an experimental demonstration that the absence of the inner metal plane in the gate structures stabilizes the NC regime favorable for hysteresis-free NC-FET.
In this work, we report a novel Indium Arsenide-on-insulator (InAsOI) FinFET platform designed with record high aspect ratio that favor the use of the devices as charge sensors. InAs has very high mobility among III-V semiconductors and an intrinsic surface accumulation layer yielding good ohmic contacts thus making it an interesting choice for chemical and biological sensing platforms. Template Assisted Selective Epitaxy (TASE) enables the integration of III-V highly scaled devices, monolithically integrated on Silicon, within a fully CMOS compatible fabrication scheme hence without any catalyst-induced growth. With a new geometry, High-aspect-ratio (HAR) InAs fins and a new application of pH sensing the versatility of TASE is exhibited. HAR InAs fins, fin height to fin width in excess of 4 for fin width down to 30nm are fabricated on a Si substrate. The HAR InAs-on-insulator fins are characterized as pH sensors. A sensitivity of 38.8mV per pH is extracted at 6 microampere drain current from a 40nm wide 20 multi-finger array.
9 July 2020 in IEEE Journal of the Electron Devices Society
In this work, we report a novel Indium Arsenide-on-insulator (InAsOI) FinFET platform designed with record high aspect ratio that favors the use of the devices as charge sensors. InAs has very high mobility among III-V semiconductors and an intrinsic surface accumulation layer yielding good ohmic contacts thus making it an interesting choice for chemical and biological sensing platforms. Template Assisted Selective Epitaxy (TASE) enables the integration of III-V highly scaled devices, monolithically integrated on Silicon, within a fully CMOS compatible fabrication scheme hence without any catalyst-induced growth. With a new geometry, high-aspect-ratio (HAR) InAs fins and a new application of pH sensing the versatility of TASE is exhibited. HAR InAs fins, fin height to fin width in excess of 4 for fin width down to 30 nm are fabricated on a Si substrate. The HAR InAs-on-insulator fins are characterized as pH sensors. A sensitivity of 38.8 mV per pH is extracted at 6 μA drain current from a 40 nm wide 20 multi-finger array.