Abel Garcia

Dr. Abel Garcia

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2022 in Buildings
Verified
Journal Article
Open access
PDF file
DEDaniel Espejel
Daniel Espejel
JHJose Hoyo-Montano
Jose Hoyo-Montano
JAJaime Arau
Jaime Arau
Guillermo Valencia-PalomoGuillermo Valencia-Palomo
Guillermo Valencia-Palomo
AGAbel Garcia
Abel Garcia
JCJorge Luis Camas-Anzueto
Jorge Luis Camas-Anzueto
Nowadays, reducing energy consumption is the fastest way to reduce the use of fossil fuels and, therefore, greenhouse gas emissions. Heating, Ventilation, and Air Conditioning (HVAC) systems are used to maintain an indoor environment in comfortable conditions for its occupants. The combination of these two factors, energy efficiency and comfort, is a considerable challenge for building operations. This paper introduces a design approach to control an HVAC, focused on an energy consumption reduction in the operation of the HVAC system of a building. The architecture was developed using a Raspberry Pi as a coordinator node and wireless connection with sensor nodes for environmental variables and electrical measurement nodes. The data received by the coordinator node is sent to the cloud for storage and further processing. The control system manages the setpoint of the HVAC equipment, as well as the turning on and off the HVAC compressor using an XBee-based solid state relay. The HVAC temperature control system is based on the Predicted Mean Vote (PMV) index calculation, which is used by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) to find the appropriate setpoint to meet the thermal comfort of 80% of users. This method combines the values of humidity and temperature to define comfort zones. The coordinator node makes the compressor control decisions depending on the value obtained in the PMV index. The proposed PMV-based temperature control system for the HVAC equipment achieves energy savings ranging from 33% to 44% against the built-in control of the HVAC equipment, when operating with the same setpoint of 26.5 grades centigrade.

17 May 2024 in Future Internet
Verified
Journal Article
Open access
PDF file
RIRoilhi F. Ibarra-Hernández
Roilhi F. Ibarra-Hernández
Francisco R. Castillo-SoriaFrancisco R. Castillo-Soria
Francisco R. Castillo-Soria
CGCarlos A. Gutierrez
Carlos A. Gutierrez
AGAbel Garcia
Abel Garcia
LVLuis Alberto Vasquez-Toledo
Luis Alberto Vasquez-Toledo
José A. Del-Puerto-FloresJosé A. Del-Puerto-Flores
José A. Del-Puerto-Flores
Machine learning (ML) algorithms have been widely used to improve the performance of telecommunications systems, including reconfigurable intelligent surface (RIS)-assisted wireless communication systems. The RIS can be considered a key part of the backbone of sixth-generation (6G) communication mainly due to its electromagnetic properties for controlling the propagation of the signals in the wireless channel. The ML-optimized (RIS)-assisted wireless communication systems can be an effective alternative to mitigate the degradation suffered by the signal in the wireless channel, providing significant advantages in the system’s performance. However, the variety of approaches, system configurations, and channel conditions make it difficult to determine the best technique or group of techniques for effectively implementing an optimal solution. This paper presents a comprehensive review of the reported frameworks in the literature that apply ML and RISs to improve the overall performance of the wireless communication system. This paper compares the ML strategies that can be used to address the RIS-assisted system design. The systems are classified according to the ML method, the databases used, the implementation complexity, and the reported performance gains. Finally, we shed light on the challenges and opportunities in designing and implementing future RIS-assisted wireless communication systems based on ML strategies.

28 February 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RJRoberto Gaona Juárez
Roberto Gaona Juárez
AGAbel Garcia
Abel Garcia
JAJesus Acosta-Elias
Jesus Acosta-Elias
ESEnrique Stevens
Enrique Stevens
CGCésar G. Galván
César G. Galván
ECErnesto Monroy Cruz
Ernesto Monroy Cruz
This article describes the design, implementation, and evaluation of an indoor localization system based on Received Signal Strength Indicator (RSSI) measurements in wireless sensor networks. While the majority of the literature uses the IEEE 802.15 standard for this type of system, all of the measurements in this study were performed using a test bench operating under the IEEE 802.11ax standard in the 2.4 GHz band. RSSI is widely used due to its simplicity and availability; however, its accuracy is limited by signal attenuation, electromagnetic interference, and environmental variability. To mitigate these limitations, the present work proposes the implementation of advanced techniques, including weighted averages and positioning algorithms such as Min–Max, Maximum Likelihood, and trilateration, aiming to achieve an accuracy of 2 m in controlled conditions. The design also included a specialized test bench to calculate the coordinates and estimate the location of unknown nodes using anchor node positioning. This approach combines the simplicity of RSSI with optimized algorithms, providing a robust and practical solution for indoor localization. The results validate the system’s effectiveness and highlight its potential for future applications in real-world environments, opening new possibilities for optimizing wireless sensor networks and addressing the current challenges in localization systems.

5 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AGAbel Garcia
Abel Garcia
DTDavid Torres-Uresti
David Torres-Uresti
Francisco R. Castillo-SoriaFrancisco R. Castillo-Soria
Francisco R. Castillo-Soria
URUlises Pineda Rico
Ulises Pineda Rico
JHJose Antonio Hoyo-Montaño
Jose Antonio Hoyo-Montaño
POPatricio Ordaz
Patricio Ordaz
The design and implementation of a car’s black box system using a Raspberry Pi microcomputer and an Internet of things module is presented in this research. This system was built using a Raspberry Pi microcomputer and different sensors, including a GPS, camera module, audio module, alcohol sensor module, and signals from the electronic control unit. The data were stored in both a secure digital card and in the cloud using the Waveshare SIM7600G-H 4G module. The results show that this embedded system can acquire and process video, audio, GPS data, alcohol concentration, speed, temperature, etc. Finally, a graphics user interface was developed to process the stored files. This system is similar to a black box in airplanes, which records all flight information into the black box using a specific algorithm. This makes the recorded flight data accessible to authorities when needed.

24 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
AGAbel Garcia
Abel Garcia
JPJose Bernal Ponce
Jose Bernal Ponce
JPJairo Plaza-Castillo
Jairo Plaza-Castillo
ACAlberto Cuevas-Salgado
Alberto Cuevas-Salgado
Ariosto MedinaAriosto Medina
Ariosto Medina
Alfonso TorresAlfonso Torres
Alfonso Torres
In this paper, the analysis, synthesis and characterization of thin films of a-Si:H deposited by PECVD were carried out. Three types of films were deposited: In the first series (00 process), an intrinsic a-Si:H film was doped. In the second series (A1–A5 process), n-type samples were doped, and to carry this out, a gas mixture of silane (SiH4), dihydrogen (H2) and phosphine (PH3) was used. In the third series (B1–B5 process), p-type samples were doped using a mixture of silane (SiH4), dihydrogen (H2) and diborane (B2H6). The films’ surface morphology was characterized by atomic force microscopy (AFM), while the analysis of the films was performed by scanning electron microscopy (SEM), and UV–visible ellipsometry was used to obtain the optical band gap and film thickness. According to the results of the present study, it can be concluded that the best conditions can be obtained when the flow of dopant gases (phosphine or diborane) increases, as seen in the conductivity graphs, where the films with the highest flow of dopant gas reached the highest conductivities compared to the minimum required for materials made of a-Si:H silicon for high-quality solar cells. It can be concluded from the results that the magnitude of the conductivity, which increased by several orders, represents an important result, since we could improve the efficiency of solar cells based on a-Si:H.

21 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
AGAbel Garcia
Abel Garcia
Roberto Ambrosio LazaroRoberto Ambrosio Lazaro
Roberto Ambrosio Lazaro
RRRafael Ramirez Ramírez-Bon
Rafael Ramirez Ramírez-Bon
Mario Alberto Garcia-RamirezMario Alberto Garcia-Ramirez
Mario Alberto Garcia-Ramirez
OPObed Perez
Obed Perez
JPJairo Plaza-Castillo
Jairo Plaza-Castillo
In this study, the impact of pH on the production of ZnO nanostructured thin films using chemical bath deposition was investigated for the purpose of enhancing the efficiency of solar cells. The ZnO films were directly deposited onto glass substrates at various pH levels during the synthesis process. The results indicate that the crystallinity and overall quality of the material were not affected by the pH solution, as observed through X-ray diffraction patterns. However, scanning electron microscopy revealed that surface morphology improved with increasing pH values, leading to changes in the size of the nanoflowers between pH 9 and 11 values. Furthermore, the ZnO nanostructured thin films synthesized at pH levels of 9, 10, and 11 were utilized in the fabrication of dye-sensitized solar cells. The ZnO films synthesized at pH 11 exhibited superior characteristics in short-circuit current density and open-circuit photo-voltage compared with those produced at lower pH values.