Melisa Atay

Dr. Melisa Atay

Dokuz Eylül University, İzmir, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 November 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MAMelisa Atay
Melisa Atay
DKDeniz Duran Kaya
Deniz Duran Kaya
AÜAydın Ülker
Aydın Ülker
As a light-weight solution for electromagnetic shielding, this paper aims to investigate the development of electrically conductive composites that shield from electromagnetic radiation while providing sustainability by using recycled fibers in the structure of nonwoven reinforcement materials. The main novelty of this research is the conversion of waste fabrics into functional composites via a fast and inexpensive method. For this purpose, waste fabrics were recycled into fibers, and the recycled fibers were processed into needle-punched nonwovens to be used as reinforcement materials for electromagnetic shielding composites. Electrically conductive composite structures were obtained by adding copper (II) sulfate and graphite conductive particles with different ratios to polyester resin. The hand lay-up method was used for the production of composites. Electromagnetic shielding, electrical resistivity, and some mechanical properties of the composites were investigated. The results were analyzed statistically using IBM SPSS software version 18. The results have shown that up to 31.43 dB of electromagnetic shielding effectiveness was obtained in the 1–6 GHz frequency range. This result corresponds to a very good grade for general use and a moderate grade for professional use, according to FTTS-FA-003, exceeding the acceptable range for industrial and commercial applications of 20 dB. The composites developed in this research are good candidates to be used in various general and professional applications, such as plastic parts in household applications, electronic industry, building and construction industries, and other applications where light weight shielding materials are needed.

17 June 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
MAMelisa Atay
Melisa Atay
Metin YurddaskalMetin Yurddaskal
Metin Yurddaskal
NSNeslihan Sakar
Neslihan Sakar
This study investigates how ytterbium (Yb) doping affects the triboelectric output of zinc oxide (ZnO)-based polydimethylsiloxane (PDMS) nanocomposites and evaluates their suitability for self-powered sensing applications. Pristine ZnO and Yb-doped ZnO powders at Yb concentrations of 3%, 6%, 9%, and 12% were synthesized by a sol–gel-assisted co-precipitation method and used as functional nanofillers in flexible PDMS-based triboelectric layers. The structural, chemical, optical, and morphological properties of the synthesized nanoparticles were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-Transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–Vis) spectroscopy, and scanning electron microscopy (SEM). In all nanoparticle-filled composite films, the total filler content was kept constant at 10 wt.%; the pristine ZnO-based composite contained 10 wt.% ZnO, whereas the Yb-doped ZnO composites contained 9 wt.% ZnO and 1 wt.% Yb-doped ZnO nanoparticles. The composite films were deposited onto polyethylene terephthalate (PET)/Kapton substrates via spin-coating. In the fabricated triboelectric nanogenerator (TENG) devices, the PET/Kapton substrate served as the positive triboelectric layer, while the PDMS-based composite layer functioned as the negative triboelectric layer. The self-powered triboelectric sensing performance of the devices was evaluated under finger-tapping mechanical excitation by measuring open-circuit voltage (Voc) responses with an oscilloscope. Among all compositions, the PZY6 device containing 6 at.% Yb-doped ZnO exhibited the best performance, delivering a maximum open-circuit voltage of 7.1 V and an apparent RMS-based power density of 136.30 nW cm⁻². The improved output was attributed to the balanced contributions of Yb-induced structural distortion, defect-related surface states, charge trapping, and interfacial polarization within the ZnO/PDMS nanocomposite system. A proof-of-concept LED demonstration further confirmed the practical energy-harvesting capability of the optimized device. These results indicate that Yb:ZnO-modified ZnO/PDMS nanocomposites are promising material platforms for flexible self-powered sensing and low-power wearable energy-harvesting applications.