This paper presents a study of the electromagnetic shielding characterization of woven fabrics, produced with two different types of conductive yarns, namely silver-containing (Ag/PA/Co) core yarns and silver-containing (Ag/PA-Co) blended yarns. The effect of various yarn and fabric properties, such as yarn count, core filament count, blend ratio, weft density, electrical resistivity, yarn type and wave frequency, on the electromagnetic shielding effectiveness was investigated. The results have shown that the shielding effectiveness can be tailored by changing the yarn and fabric parameters and also there are significant differences between the electromagnetic shielding characteristics and performances of the fabrics produced with different yarn groups. Such fabrics are future promising for both daily and professional uses, since they combine high shielding effectiveness performance and the comfort properties of conventional fabrics.
This study aims to convert composite textile structures composed of nonwoven and woven fabrics produced from cotton–jute wastes into activated carbon textile structures and investigate the possibilities of using them for electromagnetic shielding applications. To this end, the novel contribution of this study is that it shows that directly carbonized nonwoven textile via self-purging microwave pyrolysis can provide Electromagnetic Interference (EMI) shielding without any processing, including cleaning. Textile carbonization is generally achieved with conventional heating methods, using inert gas and long processing times. In the present study, nonwoven fabric from cotton–jute waste was converted into an activated carbon textile structure in a shorter time via microwaves without inert gas. Due to its polar structure, FeCl3 has been used as a microwave absorbent, providing homogeneous heating in the microwave and acting as an activating agent to serve dual purposes in the carbonization process. The maximum surface area (789.9 m2/g) was obtained for 5% FeCl3. The carbonized composite textile structure has a maximum of 39.4 dB at 1 GHz of EMI shielding effectiveness for 10% FeCl3, which corresponds to an excellent grade for general use and a moderate grade for professional use, exceeding the acceptable range for industrial and commercial applications of 20 dB, according to FTTS-FA-003.
Increasing amounts of waste resulting from over-consumption carry substantial risks for human and environmental health, and disposing of this waste requires enormous amounts of energy. As a result, waste-to-wealth and circular economy approaches have gained attention in both academia and the commercial sector in recent years. Accordingly, this study aims to develop electromagnetic shielding materials by converting non-conductive waste textiles into conductive value-added product and porous fabrics by carbonizing the structure itself rather than by adding any conductive particles. To this end, the novel contribution of the present study is that waste textiles were converted into activated carbon in a shorter time and without compromising the integrity of the fibrous network via microwave pyrolysis without inert gas. Sulfuric acid was used as a dehydration and activation agent, suppressing the release of volatile organic substances and eliminating greenhouse gas emissions. This approach also increased product yield and reduced energy consumption and sample shrinkage. The structures of the activated carbon textile showed EMI shielding within 20–30 dB (99.9% attenuation) in the 1–6 GHz frequency range. The maximum SSE/t value of 950.71 dB·cm2·g−1 was obtained with the microwave post-treated activated carbon textile. Micropores were dominant characteristics of these materials, and pore diameters increased with increased acid concentration. The maximum surface area of 383.92 m2/g was obtained with 8% acid. Ultrasound treatment reduced water-energy consumption and cost. Only 5 min of microwave post-treatment increased textile conductivity and thermal stability and contributed positively to electromagnetic shielding.
As a light-weight solution for electromagnetic shielding, this paper aims to investigate the development of electrically conductive composites that shield from electromagnetic radiation while providing sustainability by using recycled fibers in the structure of nonwoven reinforcement materials. The main novelty of this research is the conversion of waste fabrics into functional composites via a fast and inexpensive method. For this purpose, waste fabrics were recycled into fibers, and the recycled fibers were processed into needle-punched nonwovens to be used as reinforcement materials for electromagnetic shielding composites. Electrically conductive composite structures were obtained by adding copper (II) sulfate and graphite conductive particles with different ratios to polyester resin. The hand lay-up method was used for the production of composites. Electromagnetic shielding, electrical resistivity, and some mechanical properties of the composites were investigated. The results were analyzed statistically using IBM SPSS software version 18. The results have shown that up to 31.43 dB of electromagnetic shielding effectiveness was obtained in the 1–6 GHz frequency range. This result corresponds to a very good grade for general use and a moderate grade for professional use, according to FTTS-FA-003, exceeding the acceptable range for industrial and commercial applications of 20 dB. The composites developed in this research are good candidates to be used in various general and professional applications, such as plastic parts in household applications, electronic industry, building and construction industries, and other applications where light weight shielding materials are needed.
Elasticity and recovery are important for clothing comfort, especially in the manufacture of apparel and sportswear. Recently, yarns containing PBT (polybutylene terephthalate), which are able to develop good elastic properties with high recovery after a finishing process (e.g., thermal treatment), have been used for this purpose. The aim of this work is to give a comprehensive overview of the use of PBT yarns in woven structure, with the aim of improving the elastic properties of cotton-like fabrics. The experimental part was divided into three main sequences to investigate the fabric properties (physical, elastic, UPF, comfort) influenced by (1) PBT-containing yarn structure, (2) weave and fabric structure (basic weaves and complex weaves) with PBT in weft direction, and (3) processing sequence—thermal treatment of PBT yarns or fabrics after weaving. According to the results, PBT-containing yarns have great potential for the production of lightweight elastic fabrics. The advantages of improving the elastic properties of fabrics by incorporating a relatively small amount of PBT yarns into the fabric only in certain areas, thereby minimally affecting the production costs, are demonstrated by a product with partially elastic areas obtained after thermal treatment.
11 December 2019 in Mugla Journal of Science and Technology
In this paper, a preliminary research was conducted to investigate some physical properties of PLA based meltblown nonwovens for agricultural applications. Air permeability, thickness, basis weight, biodegradability and fiber diameter properties of the samples were investigated. PLA based nonwovens that are suitable to be used without damaging the environment were obtained. Such bioplastic nonwovens can be used in various agricultural applications. The samples obtained in this research provided suitable air permeability, thickness and basis weight values for use in agricultural textiles, while being biologically degradable in ecological conditions in natural environments. Bioplastic meltblown nonwoven of 5.8-10.5 μm were obtained in this research. The results of the research presented in this paper will be used for the selection of a specific agricultural application and thus extensive research will be conducted for product development of the selected product type.