Clayey soils could be exposed to thermal cycles in some engineering applications such as geothermal piles and nuclear waste storages. These temperature changes could affect the consolidation behaviour of these soils. In this context, this paper investigates the impact of temperature on the consolidation behaviour of saturated compacted clays. A temperature-controlled oedometric cell has been developed to perform constant rate of strain (CRS) consolidation tests for different strain rates (0.002 – 0.02%/min) within a temperature range of 5 °C – 70 °C. Two different compacted saturated clays were used in these tests. The results indicated that the compression and swelling indices for both materials changed with temperature and strain rate. The preconsolidation pressure of both clays decreased as the temperature increased, while it decreased as the strain rate decreased. The creep index increased as the temperature increased for both clays. These variations were completely dependent on the nature of the clays.
1 November 2020 in Journal of Materials in Civil Engineering
This study intends to examine the impact of successive wetting and drying cycles on the strength and hydraulic conductivity of lime- and cement-treated soil, with a special emphasis on the protocol that is employed to impose the cycles. Compacted specimens were cured for 90 days before being exposed to different numbers of wetting and drying cycles. These cycles were imposed on treated samples with two protocols, the first one based on oven drying and full saturation, and the second based on control of the relative humidity of the samples at room temperature to thus obtain more realistic conditions for the wetting and drying cycles. The unconfined compressive strength and saturated hydraulic conductivity were monitored as a function of the number of cycles. The results highlight the role of the imposed wetting and drying cycle technique for a better assessment of the long-term performances of treated soils. Special attention was also taken to evaluate the relationship between the alteration of hydraulic conductivity and mechanical strength as a function of the number of applied wetting and drying cycles. The results showed that the degradation of the strength of the treated samples is associated with a significant increase of their hydraulic conductivity as a function of the number of cycles.
The mechanical efficiency of soil stabilization with cement is mainly controlled by various parameters, namely, the amount of binder, the compaction soil state and the curing conditions. The strength of the treated soil is the result of a complex combination of several factors that condition the physicochemical processes involved in cement hydration, which are difficult to monitor. The objective of this study is to identify the relevant parameters governing the bonding in cement-treated soil and suggest a predictive model for strength evolution using these parameters as input. To this purpose, an extensive testing program is presented to assess the impact of the initial water content (11–18%) and dry density (1.6–1.87 Mg/m3) as well as cement dosage (3 and 6%) in sealed curing conditions for 0, 7, 28 and 90 days. The water content variation, the total suction and the compressive strength were measured after different curing durations. The experimental results are first discussed in the parameters’ space, and then through a principal components analysis to overcome the complexity due to the parameters’ interdependency. The PCA revealed that the cement dosage explained 40% of the dataset variance, the remaining 60% being related to a combination of the initial state and curing time. Finally, a predictive model based on an artificial neural network was developed and tested. The predicted results were excellent, with an R2 of +0.99 with the training data and +0.93 with the testing data. These results should be improved by extending the dataset to include different soils and additional compaction conditions.
Artificial ground freezing (AGF) has emerged as a prominent treatment method due to its ability to mechanically strengthen the soil while reducing its permeability. However, its implementation has raised concerns about its impact, particularly with respect to frost heave and subsequent thaw-induced displacements. These soil movements can cause subsidence and pose a significant threat to the integrity of surface structures. Overburden pressure plays a crucial role in AGF and determines the amount of heave generated. This paper presents an analysis of the existing literature about soil freezing and thawing. The aim is to offer an understanding of these processes, specifically with regard to their application in AGF. This paper explains the behavior of soil during freezing, with particular emphasis on the influence of overburden pressure. It also investigates frozen soils’ thawing and freeze–thaw (FT) cycles’ long-term effects on soil properties. AGF offers improved soil strength and reduced water permeability, enhancing construction project stability. However, the interplay between the temperature, soil composition, and initial ground conditions during freezing is complex. This thermo-hydro-chemo-mechanical process strengthens the soil and reduces its permeability, but it can also induce frost heave due to water expansion and ice lens formation. Overburden pressure from the overlying soil limits ice lens growth. FT cycles significantly impact soil properties. In fine-grained soils, FT cycles can lead to over-consolidation, while rapid thawing can generate high pore pressures and compromise stability. Importantly, FT acts as a weathering mechanism, influencing soil properties at both the microscopic and macroscopic scales. These cycles can loosen over-consolidated soil, densify normally consolidated soil, and increase overall hydraulic conductivity due to structural changes. They can also weaken the soil’s structure and deteriorate its mechanical performance.
The positive effects of lime or cement treatment could be altered by weathering in the very long term. In this context, the main purpose of this study is to examine the impact of wetting/drying cycles on the strength and the hydraulic conductivity of a compacted soil treated with lime and cement. Compacted specimens were cured for 90 days before being exposed up to twelve wetting and drying cycles. A special concern of the study was the experimental method to impose the wetting and drying cycles. Two protocols were employed: one relied on relative humidity control to dry the samples, while the other was based on oven drying. The impact of the cycles was quantified by comparing the performance of the samples exposed to the cycles to the performance of the unsolicited samples. The results showed that the cycles induced a major alteration of the strength of the samples, with both methods. This degradation is associated to a significant increase of the hydraulic conductivity of the samples with the number of cycles.