In recent years, the development of biodegradable materials from renewable sources based on polymeric biomaterials have grown rapidly due to increase environmental concerns and the shortage of petroleum sources. In this regard, naturally renewable polymers such as starch has shown great potential as environmental friendly materials. Besides, the unique properties of starch such as biodegradable and non-toxic, biocompatible and solubility make them useful for a various biomedical applications. Regardless of their unique properties, starch materials are known to have limitations in term of poor processability, low mechanical properties, poor long term stability and high water sensitivity. In order to overcome these limitations, the incorporation of nano size fillers into starch materials (nanocomposites) has been introduced. This review aims to give an overview about structure and characteristics of starch, modification of starch by nanocomposites and their potential for biomedical applications.
This study present the preparation of potato starch film with glycerol as a plasticizer through a solution casting technique. The effect of glycerol with varying concentrations (10%, 30%, 50% and 70%) on the tensile, microstructure and physical properties of potato starch film was investigated. Results shows that the increase of glycerol content caused the decrease in tensile strength, with the highest value of 13MPa was recorded for starch film containing 10% glycerol, whereas the elongation at break increased as the glycerol content increased from 10%-30%. Nevertheless, the elongation at break for plasticized films significantly decreased at a higher glycerol content due to anti-plasticization effect. Besides, the microstructure of the starch films showed gradual smoother surface, homogenous and good distribution, as the glycerol content increased. The thickness and moisture content of the films increased with increasing glycerol content due to the hygroscopic behavior of the plasticizer. Overall result shows that the addition of glycerol in potato starch film significantly influenced the properties of the films.
12 June 2018 in IOP Conference Series: Materials Science and Engineering
Potato starch composites film incorporating hybrid bentonite and hydroxyapatite (HA) were investigated as novel biomaterial for potential biomedical applications. The selected potato starch/bentonite composites were prepared using different ratios of HA (1, 5 and 10 wt%) through solution casting technique. The in vitro bioactivity of potato starch composites film and neat potato starch film to be used as a control were evaluated through immersion in simulated body fluid (SBF) at 37°C for 14 days. The composites films were also subjected to characterization such as morphology, pH evaluation and biodegradability analyses following immersion in SBF. The obtained results showed that the incorporation of HA into starch/bentonite composites improves the bioactivity of the starch hybrid composites by formation of apatite layer on the surface. Increasing HA content in the composite is directly proportional to the quantity of the apatite formed on the scaffolds indicating active surface interactions between the composites and SBF. Furthermore, increasing HA content contributes also to lowering biodegradability of the composite decreases.